SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, DC 20549
|x||ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934|
For the fiscal year ended December 31, 2020
|o||TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934|
For the transition period from to
COMMISSION FILE NO. 001-36905
SeaSpine Holdings Corporation
(EXACT NAME OF REGISTRANT AS SPECIFIED IN ITS CHARTER)
|(STATE OR OTHER JURISDICTION OF|
INCORPORATION OR ORGANIZATION)
| ||(I.R.S. EMPLOYER|
5770 Armada Drive, Carlsbad, CA 92008, USA
(Address of principal executive offices) (zip code) (country)
REGISTRANT’S TELEPHONE NUMBER, INCLUDING AREA CODE: (760) 727-8399
SECURITIES REGISTERED PURSUANT TO SECTION 12(b) OF THE ACT:
|Title of Each Class||Trading Symbol(s)||Name of Exchange on Which Registered|
|Common Stock||SPNE||The Nasdaq Global Select Market|
SECURITIES REGISTERED PURSUANT TO SECTION 12(g) OF THE ACT:
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes o No x
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act. Yes o
Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes x No o
Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes x No o
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer”, “accelerated filer”, “smaller reporting company”, and "emerging growth company" in Rule 12b-2 of the Exchange Act.
|Large accelerated filer||o||Accelerated filer|
|Non-accelerated filer||o ||Smaller reporting company|
|Emerging growth company||o|
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. o
Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. x
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes o No x
As of the last business day of the registrant's most recently completed second fiscal quarter (June 30, 2020), the aggregate market value of the registrant’s common stock held by non-affiliates was approximately $225,436,595 based upon the closing sales price of the registrant’s common stock on The Nasdaq Global Select Market on such date. The number of shares of the registrant’s common stock, $0.01 par value, outstanding as of February 26, 2021 was 27,932,790.
DOCUMENTS INCORPORATED BY REFERENCE:
Certain portions of the registrant’s definitive proxy statement relating to its 2021 Annual Meeting of Stockholders (scheduled for June 2, 2021) are incorporated by reference in Part III of this report.
SEASPINE HOLDINGS CORPORATION
This Annual Report on Form 10-K (this “Form 10-K” or this “report”) contains forward-looking statements, within the meaning of the Private Securities Litigation Reform Act of 1995, that involve risks and uncertainties. Many of the forward-looking statements are located in Part II, Item 7 of this report under the heading “Management’s Discussion and Analysis of Financial Condition and Results of Operations.” Forward-looking statements provide current expectations of future events based on certain assumptions and include any statement that does not directly relate to any historical or current fact. Forward-looking statements can also be identified by words such as “future,” “anticipates,” “believes,” “estimates,” “expects,” “intends,” “plans,” “predicts,” “will,” “would,” “could,” “can,” “may,” and similar terms. Forward-looking statements are not guarantees of future performance and our actual results may differ significantly from the results discussed in the forward-looking statements. Factors that might cause such differences include, but are not limited to, those discussed in Part I, Item 1A of this report under the heading “Risk Factors,” which are incorporated herein by reference. We assume no obligation to revise or update any forward-looking statements for any reason, except as required by law.
The terms “we,” “us,” “our,” “SeaSpine” or the “Company” refer collectively to SeaSpine Holdings Corporation and its wholly-owned subsidiaries, unless otherwise stated. All information presented in this report is based on our fiscal year. Unless otherwise stated, references to particular years, quarters, months or periods refer to our fiscal years ending December 31 and the associated quarters, months and periods of those fiscal years.
ITEM 1. BUSINESS
We are a global medical technology company focused on the design, development and commercialization of surgical solutions for the treatment of patients suffering from spinal disorders. We have a comprehensive portfolio of orthobiologics and spinal implant solutions to meet the varying combinations of products that neurosurgeons and orthopedic spine surgeons need to perform fusion procedures in the lumbar, thoracic and cervical spine. Our orthobiologics products consist of a broad range of advanced and traditional bone graft substitutes designed to improve bone fusion rates following a wide range of orthopedic surgeries, including spine, hip, and extremities procedures. Our spinal implant portfolio consists of an extensive line of products to facilitate spinal fusion in degenerative, minimally invasive surgery (MIS), and complex spinal deformity procedures. Expertise in both orthobiologic sciences and spinal implant product development allows us to offer surgeon customers a differentiated portfolio and a complete solution to meet their patients' fusion requirements. We currently market our products in the United States and in approximately 30 countries worldwide.
SeaSpine was incorporated in Delaware on February 12, 2015 in connection with the spin-off of the orthobiologics and spinal implant business of Integra LifeSciences Holdings Corporation (Integra), a diversified medical technology company. The spin-off occurred on July 1, 2015. Our corporate offices are at 5770 Armada Drive, Carlsbad, California.
The spine is a column of bone and cartilage that consists of 33 interlocking bones, called vertebrae, which stack upon each other at a slight angle to form the spine’s S-shaped curve. Except for the bottom nine vertebrae, the vertebrae are separated by thin regions of cartilage known as intervertebral discs, which act as shock absorbers that facilitate motion and absorb stress during movement. The spine protects the spinal cord and acts as the core of the human skeleton, extending from the base of the skull to the pelvis. Soft tissues, including ligaments, tendons and muscles, are attached to the vertebrae and provide stability to the vertebral segment. The spinal cord carries nerves that exit through openings between the vertebrae and deliver sensation and control to the body. Below is a diagram of the lateral view of the spine:
The spine consists of five regions, of which the cervical, thoracic and lumbar are the three primary regions. The cervical region consists of the seven vertebrae extending from the base of the skull to the shoulders. The thoracic, or central, region consists of the next twelve vertebrae in the middle of the back. Each vertebra in the thoracic region is connected to two ribs that protect the body’s vital organs. Below the thoracic region, the lumbar region consists of five vertebrae in the lower back and is the primary load-bearing region of the spine. The thoracic and lumbar regions are commonly called thoracolumbar and many of the products and procedures to treat these regions are similar. The final two regions of the spine, the sacrum and coccyx, consist of nine naturally fused vertebrae connected to the hip bones to provide support for the spine.
In spinal fusion procedures, two or more vertebrae are fused to eliminate instability as a result of deformity, degeneration or trauma affecting the vertebrae and intervertebral discs. During the procedure, spinal implant products are used to decompress, align, and stabilize the spine and the surgeon will often remove the damaged intervertebral disc and replace it with a bone graft substitute to allow new bone to grow and to fuse the affected vertebrae together. In addition to the bone graft substitute, the surgeon may replace the removed disc with an interbody device. An interbody device, which may be made out of machined bone, titanium, 3D-printed titanium or polyetheretherketone (PEEK) is designed to maintain spine alignment and appropriate spacing while allowing bone to grow between the vertebrae to achieve bone fusion. Procedures that include the implantation of interbody devices are often referred to by the surgical approach used to place the interbody device in the disc space. A lateral lumbar interbody fusion uses an approach that accesses the spine from the side of the patient’s body; a posterior lateral interbody fusion uses a direct posterior approach from the patient’s back; a transforaminal lumbar interbody fusion uses an angled approach from either the left or right side of the back; and an anterior lumbar interbody fusion uses a direct anterior approach from the patient’s front (stomach) area.
Our Competitive Strengths
We are dedicated to providing a comprehensive portfolio of innovative, procedurally focused products designed to work together to drive fusion. The latest advancements in bone biology and materials science guide the development of in-house manufactured advanced orthobiologics and proprietary spinal implant technology engineered to address the many nuances of spinal pathology. Our products can be tailored to meet individual patient needs, delivering both clinical and economic value to patients, surgeons, and hospital systems. Our executive management team has extensive experience in the spine and medical technology industries. We believe that our management team, combined with the following competitive strengths, will enable us to continue to grow our revenue and increase our presence in the markets we serve.
Our Integrated Orthobiologics Business drives alignment and priorities across research and development, marketing, quality and manufacturing operations designed to deliver clinical value through best of class, cost effective products, the vast majority of which are processed in-house. By controlling the design, manufacturing, and quality processes, we believe that we are better able to control the overall product quality and consistency while also providing cost of goods advantage and operational leverage with volume increases.
•Our focused R&D team and disciplined development process optimizes our new products by isolating the manufacturing elements to optimize product performance and ultimately deliver differentiated products.
•We are investing in various studies to differentiate our products with science and data. Most notably, we sponsored a study comparing two leading Cellular Bone Grafts with our Strand Plus demineralized bone fibers that was published in 2020 in the Journal of Bone and Joint Surgery (JBJS). The study concluded that the cells in cellular bone matrix (CBM) products did not improve fusion or bone formation. The study also demonstrated that SeaSpine’s
demineralized bone matrix (DBM) product, OsteoStrand Plus, outperformed the tested CBM product. This study substantiates payor and provider pushback for cellular bone grafts, and, combined with the previously published pre-clinical study comparing the OsteoStrand DBM fibers to six leading competitive DBMs, provides strong scientific support for SeaSpine’s differentiated DBM offerings, We will continue to invest in preclinical and clinical data to evidence our products and their clinical value..
•A synergistic channel strategy for orthobiologics products. Our dual branding strategy allows us to market our orthobiologics products through independent sales agents who carry competitive spinal implant products. Specifically, we market our orthobiologics under the SeaSpine and IsoTis brands, which allows sales agents who sell spinal implant products competitive with ours to continue to represent our orthobiologics products. We believe this dual branding strategy allows us to penetrate a greater number of customer accounts than we would otherwise serve if we marketed our orthobiologics products under a single brand.
•The combination of these elements along with a strengthened distribution channel, has allowed us to move into the #2 position in the US DBM market which is a critical factor for our continued access to IDN (independent distributor network) and GPO (group purchasing organization) networks.
Fusion Engineered™ Modular Spinal Implant Systems are available with multiple material and surface technology options developed specifically to leverage the strengths of our orthobiologics products. The modularity of these systems provides versatility while minimizing the amount of inventory required for each surgery.
•A range of innovative, PEEK interbody devices that incorporate NanoMetalene, a proprietary titanium surface technology with Reef Topography. We currently offer a wide range of sterile-packaged interbody devices that incorporate our proprietary NanoMetalene surface technology with Reef Topography. NanoMetalene is a surface technology for interbody implants that incorporates a sub-micron layer of commercially pure titanium bonded to a PEEK implant using a high-energy, low-temperature process called atomic fusion deposition. NanoMetalene is designed to provide implants a bone-friendly titanium surface on endplates and throughout graft apertures, while retaining the benefits associated with traditional PEEK implants, such as biocompatibility, a modulus of elasticity similar to bone, and excellent radiographic visibility for post-operative imaging. Reef Topography™ describes machined macrostructures and undercut features that pre-clinical studies show improve early biomechanical stability. Reef is designed to act as an integrated fusion scaffolding that increases surface area for new bone to grow onto and into the interbody device. We have exclusive rights to NanoMetalene and Reef Topography technologies within the spine market.
•A line of Waveform™ interbody implants offering the next level of 3D-printed titanium architectural innovation. Waveform™ technology balances key geometric and manufacturing advancements without compromising clinical requirements to deliver a highly porous and robust interbody solution. The interbody design is intended to balance subsidence resistance, implant stiffness, and bone graft packability, while maintaining radiographic visualization during intraoperative and postoperative imaging.
•An expandable posterior interbody solution that offers both parallel and lordotic expansion options to fit both the patient’s need as well as surgeon preference. The Explorer™ TO system provides a low-profile design for insertion with expansion versatility achieving up to 16mm in height and up to 20 degrees of lordosis. The streamlined and intuitive instrumentation provides the ability to pack biologics through the implant into the disc space after expansion.
•Modular solutions across the portfolio intended maximize clinical versatility, while minimizing the complexity and increased inventory requirements of non-modular systems. One of our foundational systems that incorporates modular technology is our Mariner Posterior Fixation Platform. The Mariner System is designed to address a wide range of pathologies with an efficient set of instruments and modular implants. Surgeons use Mariner to accommodate conventional, as well as minimally invasive approaches to treat degenerative and complex spine pathologies with a minimum number of trays. This allows surgeons to most effectively and efficiently use the most appropriate surgical techniques to address each unique patient condition.
Our goal is to continue to scale our business in order to enhance our market position in orthobiologics and become a leader in the spinal implant market. To achieve our goal, we are investing in these strategies:
•Research and development to bring new products and techniques to market. We have recently increased, and intend to continue to increase, our annual research and development spending as a percentage of revenue in an effort to drive higher revenue growth through new product sales. We plan to continue to invest resources and to work with our surgeon customers to understand their needs and develop new and next-generation orthobiologics and spinal implant
products designed to improve clinical outcomes. We employ dedicated orthobiologics engineers and scientists with expertise in material sciences, and biology and hardware engineers with expertise in product design and development.
•Commercial infrastructure to further penetrate the U.S. orthobiologics and spinal implant markets and increase our focus in international markets where we currently have a presence. We have recently increased, and intend to continue to increase, the quality, size, exclusivity and geographic breadth of our network of independent sales agents in the United States. To support these efforts, we are investing more in, and are developing comprehensive support for, sales agent and surgeon training and education programs. We have hands-on cadaveric training facilities in Carlsbad, California and Wayne, Pennsylvania where we provide training for surgeons and sales agents. In addition, we plan to increase our presence within teaching institutions that provide spinal surgery fellowship programs to educate new surgeons on the use of our products. We believe these combined efforts will help surgeons become adept with our spinal implant products and techniques, thereby improving outcomes for their patients. Internationally, we intend to continue to focus our sales and marketing efforts on expanding and strengthening our presence in those markets where we currently have relationships with stocking distributors and to selectively expand into new markets.
•Pre-clinical and post-market clinical study programs to generate data. We plan to invest to further develop our pre-clinical and clinical programs designed to generate peer-reviewed scientific evidence and a podium presence that we believe will support the performance of select orthobiologics and spinal implant solutions that may be compared to competing technologies. We believe that our NanoMetalene, Reef Topography and WaveFormTM technologies may have advantages over many existing implant materials and surface options, and that our fibers-based OsteoStrand® and OsteoStrand Plus tissue products are more efficacious and cost-effective than, higher cost cellular allografts bone grafts.
•Opportunities to enhance our product offering through strategic alliances and acquisitions. We currently market several products under distribution agreements and licenses with third-parties. We intend to continue to pursue alliances and acquisition opportunities that we believe will provide us with technologies to strengthen our market position and grow our business. For example, in January 2020, we announced a strategic alliance agreement with 7D Surgical, Inc., a privately-held Toronto-based company developing advanced image guidance technologies and machine-vision-based registration algorithms to improve surgical workflow and patient care, under which we will seek to offer a customized, best-in-class navigational solution and enabling technology to our hospital and surgeon customers on a non-exclusive basis.
We offer a portfolio of orthobiologics and spinal implant products for the treatment of patients suffering from spinal and other orthopedic disorders. Information regarding the amount and percentage of total revenue contributed by our orthobiologics and spinal implant products for each of the last two fiscal years may be found in Part II, Item 7 of this report under the sections entitled “Year Ended December 31, 2020 Compared to Year Ended December 31, 2019—Revenue” and in Part II, Item 8 of this report in the Notes to Consolidated Financial Statements in Note 10, “Segment and Geographic Information.”
Our orthobiologics products are used in orthopedic and dental procedures and consist of a broad range of bone graft substitutes intended to address the key elements of bone regeneration.
Bone graft substitutes composed of natural biologic proteins and synthetic materials are designed to reduce the amount of autologous bone grafts needed for spinal fusion procedures. Bone graft substitutes, depending on their design, can be used entirely in place of the patient’s own bone tissue, called an autograft, or by extending the volume of bone graft material from the patient by combining it with the bone graft substitute.
Our orthobiologics portfolio includes fibers-based and particulate DBM, collagen ceramic matrices, demineralized cancellous allograft bone and synthetic bone void fillers. We offer our orthobiologics products in the form of fibers, putties, pastes, strips and DBM in a resorbable mesh for a range of surgical applications.
Demineralized Bone Matrix and Accell
DBM formulations are designed to provide proteins and other growth factors at varying stages of the bone healing process. Developed in the early 1990s, our first-generation DBM formulations combined particulate-demineralized bone matrix with an inert carrier engineered for easy graft handling and graft containment. The carrier is a biocompatible synthetic polymer
with an advantageous property that allows the product to remain moldable at room temperature, but becomes more viscous at body temperature once implanted, which we call reverse-phase. Subsequently, we developed a proprietary process to transform particulate-based DBM into a dispersed form to enhance the performance of the graft material. The result of this process was a DBM product we call Accell Bone Matrix. Accell Bone Matrix is an open structured, dispersed form of DBM, which increases the bioavailability of bone proteins at an earlier time in the healing cascade. Standard particulate DBM is dense and therefore the bone proteins release more slowly and in a sustained manner over time. The properties of Accell Bone Matrix and DBM are both desirable, which is why our advanced DBM products include both components to harness both the early and sustained release of bone proteins. Our Accell Evo3 and OsteoSurge 300 DBM products provide an optimized formulation of Accell Bone Matrix, particulate-based DBM, and our reverse-phase carrier. These products have a handling property for bone grafting procedures and contain three times the amount of the Accell Bone Matrix compared to earlier products. We believe that providing both the early-stage and late-stage accessibility of osteoinductive bone proteins provided by a composite of Accell Bone Matrix and the particulate-based demineralized matrix differentiates our product compared to competitive DBM products.
Our OsteoStrand® and Strand® Demineralized Bone Fibers product lines as well as our OsteoStrand Plus and Strand Plus product lines, which incorporate our proprietary Accell Bone Matrix, provide 100% demineralized bone fibers designed to facilitate and aid in fusion by maximizing osteoinductive content while providing an improved conductive matrix. The fibers were developed through a process that evaluated a variety of fiber geometries to optimize osteoinductivity and osteoconductivity, intraoperative handling and controlled expansion in order to facilitate surgical placement, to maintain surgical position and to allow the fibers to better fill the surgical defect with the overriding goal to improve fusion potential.
Our OsteoBallast® and Ballast® Demineralized Bone Matrix in Resorbable Mesh product lines are designed to facilitate and aid in fusion. These products, which consist of a resorbable mesh containing 100% DBM without a carrier, are designed to simplify graft placement and help prevent graft migration while maximizing DBM content. OsteoBallast® is designed to provide surgeons with a simple means for delivering bone graft in posterior spine surgery that contours to the local anatomy while maintaining shape and volume under compression. The simplified technique is intended to be particularly valuable in MIS procedures, where placing the graft accurately through tubes and small incisions can be challenging.
We believe that our recently launched and existing product offerings deliver clinical value as payors and hospitals seek more cost effective orthobiologic solutions.
Collagen Ceramic Matrix Technologies
Our collagen ceramic matrix technology leverages a history of regenerative technology and collagen engineering. Our leading products in this category are currently marketed as IsoTis Mozaik and OsteoStrux and are engineered to provide a porous scaffold architecture and osteoconductivity. These products also support osteogenesis, as they are indicated for use with bone marrow aspirate, which contains osteogenic cells. These products are composed of highly purified beta-tricalcium phosphate granules, which provide mineral content to foster bone formation during the healing process in a framework of type-1 collagen that provides a scaffold for bone cell migration. These products are engineered with a resorption profile consistent with the rate of natural bone formation.
Other Bone Graft Substitutes
Our other bone graft substitute products consist of allograft cancellous bone scaffolds and synthetic bone void fillers.
Our spinal implant portfolio consists of an extensive line of products for spinal decompression, alignment, and stabilization. Such products are typically used to facilitate fusion in degenerative, minimally invasive, and complex spinal deformity procedures throughout the lumbar, thoracic and cervical regions of the spine. Our products are increasingly focused on restoring adequate spinal balance and profile in the sagittal (front to back) plane, which we believe is widely recognized as an important factor to improve the quality of life in patients undergoing surgery for spinal degeneration or deformity.
Our degenerative products include systems used in open and MIS procedures. Open procedures are still the most common surgical approach and involve a midline incision followed by retraction of the skin and soft tissues. We offer an extensive portfolio of degenerative products designed for use in both thoracolumbar and cervical spine cases.
Our innovative line of composite PEEK interbody devices featuring NanoMetalene surface technology with Reef Topography with various footprint and lordotic options, is designed to maintain spine alignment and appropriate spacing while allowing bone to grow between the vertebrae to achieve bone fusion. Our Reef-TO, Reef-TA and Reef-TH interbody devices for transforaminal lumbar interbody fusion procedures can be used to fuse the lumbar spine through a posterior approach that starts off to one side of the patient’s back. Our Vu a∙POD™ Prime NanoMetalene® and Reef-A interbody devices for anterior lumbar interbody fusion procedures can be used to fuse the spine through an anterior approach. Our Regatta NanoMetalene Lateral System is a comprehensive lateral lumbar interbody system that can be used to fuse the spine through a lateral approach. Our Cambria NanoMetalene interbody device can be used to fuse the cervical spine through an anterior approach. Our Shoreline® Anterior Cervical Standalone System, featuring the NanoMetalene with Reef Topography, is a modular plate and interbody device designed to maximize intraoperative flexibility to address a wide range of anatomy, surgical situations or bone in anterior cervical fusions.
We launched anterior cervical and transforaminal lumbar interbody fusion interbody 3D-printed devices under our Waveform™ brand in 2020. We plan on launching three additional devices covering the anterior lumbar interbody fusion, lateral lumbar interbody fusion and articulating transforaminal lumbar interbody fusion interbody device in 2021 to expand the product line.
We launched the next generation of our Explorer™ TO expandable interbody device system with complementary lordotic and parallel expanding implant options in 2020 and enhancements to that system are currently in development.
We offer a comprehensive portfolio of spinal fixation products for the cervical, thoracic and lumbar regions of the spine, consisting of rods, screws, plates and instrumentation to facilitate spinal decompression and fusion. Our Mariner Posterior Fixation System is a pedicle screw system for open and MIS procedures featuring modular threaded technology and accompanying instrumentation designed to reduce the number of trays needed for surgery and that provides surgeons with multiple intra-operative options to facilitate posterior lumbar fixation. We also offer a variety of screw and plating systems, such as our Cabo™ ACP Anterior Cervical Plating System, that combine large graft viewing windows and a visual confirmation locking system for cervical fixation.
Minimally Invasive Surgery
MIS procedures are less invasive than traditional open surgery procedures, and may result in reduced post-operative pain, faster rates of healing and fewer procedure complications by minimizing incision size and tissue dissection. Our surgeon customers utilize our iPassage™ MIS Retractors, NewPort™ Tube Retractors, and new pedicle screw-based Mariner MIS Retractors to perform MIS fusions and decompression procedures, a surgical technique used to alleviate pain caused from compression on the spinal cord or the nerves that emanate from it. During the procedure, the surgeon makes a small incision and inserts the retractor through the skin and soft tissues down to the spinal column, creating a tunnel to the spine. The retractor is kept in place to hold the muscles open throughout the procedure. Through this tunnel, the surgeon accesses the spine using small instruments and inserts implants necessary for fusion, such as the screws and rods of our Mariner MIS Posterior Fixation System and NewPort MIS solutions. The Mariner MIS Posterior Fixation System features low-profile, robust towers for rod introduction and reduction as well as ultra-tough modular extended tab heads, capable of providing powerful instrumented compression and distraction of the spine. Our NewPort MIS product has extended tabs for a small incision profile and offers two rod delivery options for both mini-open and percutaneous approaches. Our MIS portfolio also includes a comprehensive set of decompression instruments, static and expandable interbody devices, and screw systems designed to facilitate access to the treatment area while minimizing anatomical disruption.
Complex Spinal Deformity
Our spinal implant products are used in complex spinal deformity procedures involving multiple spine segments, challenging anatomy, tumors, traumatic injury and revision of previous fusion surgeries. We define deformity as any variation in the natural curvature of the spine, the most common of which is scoliosis, an abnormal lateral curvature of the spine. We offer several technologies designed to address the needs of our surgeon customers who perform complex deformity procedures and the various derotation techniques they use to correct spine curvature. For example, our Daytona® Deformity System uses extended tab uniplanar and polyaxial screws with multiple rod options and intuitive instrumentation to create a versatile system adaptable to surgeon preference. Our Daytona Small Stature System, which has an adolescent idiopathic scoliosis indication, is designed to address standard to complex deformity cases in smaller-sized patients who need a lower profile construct due to anatomy constraints. We provide our systems in multiple configurations and materials to address patient requirements, including titanium alloy and cobalt chrome alloy rod options, as well as multiple rod diameters. Offering products with varying rod diameter and materials provides the surgeon different rod stiffness to treat individual patients. We offer both implant- and instrument-based reduction capabilities with our extended tab and locking cap products, as well as our uniplanar and D-planar screws and rapid sequential reduction towers. The Mariner Outrigger Revision System is an adjunct to the Mariner Posterior Fixation System designed to effectively revise and extend previous fusions. Our complex spinal implant portfolio allows surgeons to combine various product lines and approaches, offering several treatment options for the most difficult cases. In 2021, we plan to continue to extend the Mariner modular platform to address complex spine adult deformity pathologies.
We believe that our future success and ability to continue to drive revenue growth depends on our ability to sustain a similar cadence of launching new and next-generation products as we have demonstrated over the last few years. We continue to aggressively develop differentiated new products that we believe will allow us to enter new markets and be even more competitive in markets in which we are underrepresented. For example, during 2021, we expect to launch a new modular anterior lumbar interbody fusion system with multiple interbody and fixation options, a new anterior cervical plating system, a new posterior cervical and occipital fixation system, a new cervical and thoracolumbar modular corpectomy system, and an adult deformity posterior fixation system.
Research and Development
We have a research and development organization dedicated to advancing our portfolio of orthobiologics and spinal implant products through product development and clinical affairs programs. Our product development efforts employ an integrated team approach that involves collaboration between surgeons, our engineers, our machinists, as well as our regulatory personnel.
Our spinal implants product development team, in consultation with designing surgeons, formulates a design for the product and then our machinists build prototypes for testing in our prototyping development and testing operation at our Carlsbad, California facility. We use a broad scope of technologies designed to allow us to meet the complex engineering requirements of customers. As part of the development process, spine surgeons test the implantation of the products in our in-house cadaveric laboratories, which helps us design new products intended to meet the needs of both surgeon and patient. Our team refines or redesigns the prototype as necessary based on the results of the product testing, allowing us to perform rapid iterations of the design-prototype-test development cycle. Our clinical and regulatory personnel work in parallel with our product engineering personnel to facilitate regulatory clearances of our orthobiologics and spinal implant products. We believe that these product development efforts allow us to provide solutions that respond to the needs of our surgeon customers and their patients.
We plan to develop line extensions for our innovative orthobiologics technologies that will continue to reduce the amount of autologous bone graft needed for spinal fusion procedures. We are investigating new product formulations in the traditional DBM and Ceramic Matrix product categories. Our orthobiologics research and development team has experience in biomaterial sciences and bringing next generation technologies to market.
We are also committed to developing new spinal implant products that leverage the NanoMetalene with Reef Topography, 3D-printed titanium and expandable interbody platforms technology and provide next generation solutions for our existing products or extend the range of solutions that we provide. We aim to further build upon our foundation of static and expandable interbodies through hyperlordotic and alternative approach options within the interbody space. We are also committed to providing products, such as additional hyperlordotic cage options and additional expandable technology solutions,
to achieve appropriate curvature of the spine and that can improve sagittal balance, correcting the patient’s spinal alignment. We also plan to continue to develop next generation technologies that meet global demand, particularly with respect to cost and delivery methods in a manner which supports a scalable commercial model.
Sales and Distribution
We currently market and sell our products in the United States and in approximately 30 countries worldwide. Our United States sales organization consists of regional and territory business managers who oversee a broad network of independent orthobiologics and spinal implant sales agents that receive commissions from us based on sales they generate. Our international sales organization consists of a sales management team that oversees a network of independent orthobiologics and spinal implant stocking distributors that purchase our products directly from us and independently sell them. During 2020, our domestic and international revenues accounted for 90% and 10%, respectively, of total revenue. Information regarding financial data by geographic segment is set forth in Part II, Item 8 of this report in the Notes to Consolidated Financial Statements in Note 10, “Segment and Geographic Information.”
In the United States, we typically consign our orthobiologics products and consign or loan our spinal implant sets to hospitals and independent sales agents, who in turn deliver them to the hospital for a single surgical procedure or leave them with hospitals that are high volume users for use in multiple procedures. Our spinal implant sets typically contain the instruments, including disposables, and spinal implants required to complete a surgery.
In international markets, we predominantly sell complete instrument and implant sets to independent stocking distributors, who consign or loan these sets to surgeons. We maintain sales and marketing personnel in France to manage and support our stocking distributors in Europe and use third-party distribution facilities in Belgium and the Netherlands to support European distribution efforts.
We have recently increased, and intend to continue to increase, the quality, size, exclusivity and geographic breadth of our network of independent sales agents in the United States. During 2019 and 2020, we gained representation in parts of the country where we had no representation or were significantly underrepresented. We anticipate adding additional independent sales agents in the United States in 2021. With certain of the new sales agents that we bring on board in territories with a high potential for growth, we focus on entering into relationships in which they carry our spinal implants and/or DBM products exclusively, except with respect to clinical markets that our products do not address. We believe these more exclusive relationships will allow us to grow faster and more cost effectively in these territories over the long term. We also plan to continue to invest in additional instrument sets and marketing and education efforts to support the expansion of our independent sales agent footprint.
To support our expansion efforts in the United States, we have invested more in, and developed comprehensive support for, sales agent and surgeon training and education programs. To this end, we have leveraged the capacity of our hands-on cadaveric training laboratories at our Carlsbad, California and Wayne, Pennsylvania facilities to increase the number of training opportunities for surgeons and sales agents. We believe training and education will help surgeons become adept with our spinal implant products and techniques, thereby improving outcomes for their patients.
We believe the expansion of our U.S. sales efforts will provide us with the opportunity to sustain revenue growth as we continue to penetrate existing and new markets.
Internationally, we intend to continue to focus our sales and marketing efforts on expanding and strengthening our presence in those markets where we currently have relationships with stocking distributors and to selectively expand into new markets.
Suppliers and Raw Materials
In general, raw materials essential to our businesses are readily available from multiple sources. For reasons of quality assurance, availability or cost effectiveness, certain components and raw materials are available only from one supplier. Our relationships with suppliers that cannot be replaced without a material expense or delay are governed by written contracts, which are generally supply agreements. These agreements set forth the process by which we order components or raw materials, as applicable, from such suppliers (which process is either on a purchase order basis or based on quarterly or annual forecasts and in some cases require us to purchase minimum amounts) and the related fees for purchasing such components or raw materials. These agreements have terms from one to five years, but in most instances are terminable by us (and in limited
instances the other party) for convenience, subject to a specified notice period, and are also terminable upon agreement by the parties, by either party upon material breach by the other and by either party if the other party enters bankruptcy. These agreements also outline the rights of each party with respect to quality assurance, inspection and compliance with applicable law and contain what we believe to be customary indemnification provisions for commercial agreements. Each of these agreements is entered into in the ordinary course of our business, and except for our supply agreement with PcoMed, LLC (PcoMed), is immaterial in amount and significance and not a contract upon which our business is substantially dependent. In addition, we endeavor to maintain sufficient inventory of components and raw materials so that our production will not be significantly disrupted even if a particular component or material is not available for a period of time.
Most of our biomaterial products contain material derived from human or bovine tissue. We only source our raw materials from tissue banks registered with the U.S. Food and Drug Administration (FDA) and accredited by the American Association of Tissue Banks (AATB). The donors are screened, tested and processed by the tissue banks in accordance with FDA and AATB requirements. Additionally, each donor must pass FDA-specified bacterial and viral testing before raw material is distributed to us for further processing. We receive with each donor lot a certification of the safety of the raw material from the tissue bank’s medical director. As an added safety assurance, each lot of bone is released into the manufacturing process only after our quality assurance microbiologists screen the incoming bone and serology test records. During our manufacturing process, the bone particles are subjected to our proprietary process and terminally sterilized. This process is designed to support the safety and effectiveness of our DBM products.
The collagen used in our collagen ceramic matrix products is derived only from the deep flexor tendon of cattle less than 24 months old from the United States or New Zealand. The World Health Organization classifies different types of cattle tissue for relative risk of bovine spongiform encephalopathy (BSE) transmission. Deep flexor tendon is in the lowest-risk category for BSE transmission (the same category as milk, for example) and is therefore considered to have a negligible risk of containing the agent that causes BSE (an improperly folded protein known as a prion).
We seek patent and trademark protection for our key technology, products and product improvements, both in the United States and in select foreign countries. When we determine appropriate, we plan to continue to enforce and defend our patent and trademark rights. In general, however, we do not rely solely on our patent and trademark estate to provide us with any significant competitive advantages as it relates to our existing product lines.
We also rely upon trade secrets and continuing technological innovations to develop and maintain our competitive position. In an effort to protect our proprietary information, we typically require our employees, consultants and advisors to execute agreements that provide that confidential information developed or provided to the individual by us or on our behalf during their relationship with us must be kept confidential, except in specified circumstances.
IsoTis OrthoBiologics, Inc., one of our subsidiaries, owns a group of patents related to the reverse-phase carrier and Accell process and materials. This patent group protects the Accell family of DBM products. The patents in this group expire over time through 2024.
We licensed three U.S. patents related to certain of our pedicle screw systems from Dr. Thomas T. Haider. The license agreement, as amended, expired when the last-to-expire licensed patent expired in December 2016. Sales of the products covered under this license agreement represented approximately 5% of our total revenue in 2020.
Our material registered and unregistered trademarks include: Accell®, Accell Connexus®, Accell Evo3®, Accell Evo3®c, Accell TBM®, Accell Total Bone Matrix®, Atoll™, Ballast®, Capistrano™, Coral®, Current®, Daytona®, DynaGraft® II, Explorer™, Fusion Engineered™, Hollywood™, IsoTis®, IsoTis® OrthoBiologics®, Malibu™, Mariner®, Meridian™, NanoMetalene®, NewPort™, NorthStar®, NorthStar® OCT, OrthoBlast® II, OsteoBallast®, OsteoCurrent®, OsteoStrand®, OsteoStrux®, OsteoSurge® 100 (or 300), Outrigger®, RAPID®, Reef®, Regatta®, SeaSpine®, Shoreline®, Shoreline RT®, Sierra™, SkipJack®, SkipJack Expandable Interbody®, Sonoma™, Strand®, Trident-C™, Trident-L™, TruProfile®, Vu a•POD™, Vu a•POD™ Prime, and WayFinder™.
The global orthobiologics and spine markets are highly competitive. We face significant competition in both markets from the spine divisions of large multinational medical device companies, established companies focused solely or primarily on spine, as well as smaller, emerging players focused on product innovation. These competitors are focused on bringing new technologies to market and acquiring technologies and technology licenses that directly compete with our products or have potential product advantages that could render our products obsolete or noncompetitive.
Our primary competitors in the combined orthobiologics and spinal implant markets include Alphatec Spine, Baxter, Bioventus, Cerapedics, DePuy Synthes Spine (a Johnson & Johnson company), Globus Medical, Medtronic, NuVasive, Orthofix, Stryker, Surgalign, XTANT Medical, Zimmer-Biomet and many smaller, biologically-focused companies.
We anticipate that our currently marketed products and any future marketed products will be subject to intense competition. Many of our competitors have significantly greater financial, manufacturing and marketing resources than we do, which could make scaling our business challenging. In addition, these competitors have more tenured relationships with parties in distribution channels and we anticipate they will continue to dedicate significant resources to marketing and distributing their products and to developing and commercializing competing products. Our ability to compete will depend on our ability to launch innovative new products that demonstrate superior clinical outcomes.
We are a manufacturer and marketer of medical devices and a tissue bank, and therefore are subject to extensive regulation by the FDA, other federal governmental agencies and, in some jurisdictions, by state and foreign governmental agencies. The regulations to which we are subject govern the introduction of new medical devices, the observance of certain standards with respect to the design, manufacture, testing, labeling, promotion and sales of devices, record maintenance, the ability to track devices, potential and actual product defect reporting, import and export of devices, and other matters.
The regulatory process of obtaining product approvals and clearances can be onerous and costly. The FDA requires, as a condition to marketing a medical device in the United States, and as applicable based on product type and classification, that we secure a Premarket Notification clearance pursuant to Section 510(k) of the United States Federal Food, Drug, and Cosmetic Act (FDCA) or an approved premarket approval (PMA) application (or PMA supplement). Obtaining these approvals and clearances can take up to several years and may involve preclinical studies and clinical trials. The FDA may also require a post-approval clinical trial as a condition of approval.
To perform clinical trials for significant risk devices in the United States on an unapproved product, we are required to obtain an Investigational Device Exemption from the FDA. The FDA may also require a filing for FDA approval prior to marketing products that are modifications of existing products or new indications for existing products. Moreover, after clearance/approval is given, if the product is shown to be hazardous or defective, the FDA and foreign regulatory agencies have the power to withdraw the clearance or require us to change the device, its manufacturing process or its labeling, to supply additional proof of its safety and effectiveness or to recall, repair, replace or refund the cost of the medical device.
The FDA Safety and Innovation Act of 2012 (FDASIA), which includes the Medical Device User Fee Amendments of 2012, as well as other medical device provisions, went into effect October 1, 2012. This includes performance goals and user fees paid to the FDA by medical device companies when they register and list with the FDA and when they apply to market a device in the United States. The FDASIA also imposes additional requirements regarding FDA Establishment Registration and Listing of Medical Devices. All U.S. and foreign manufacturers must have an FDA Establishment Registration and complete Medical Device listings for sales in the United States.
We manufacture medical devices derived from human tissue (demineralized bone tissue). The FDA has specific regulations governing human cells, tissues, and cellular and tissue-based products (HCT/Ps). An HCT/P is a product containing, or consisting of, human cells or tissue intended for transplantation into a human patient. Examples include bone, ligament, skin and cornea. Some HCT/Ps fall within the definition of a biological product, medical device or drug regulated under the FDCA. These biologic, device or drug HCT/Ps must comply both with the requirements exclusively applicable to HCT/Ps and, in addition, with requirements applicable to biologics, devices or drugs, including premarket clearance or approval from the FDA.
Section 361 of the Public Health Service Act authorizes the FDA to issue regulations to prevent the introduction, transmission or spread of communicable disease. HCT/Ps regulated as 361 HCT/Ps are subject to requirements relating to registering facilities and listing products with the FDA, screening and testing for tissue donor eligibility, Good Tissue Practice
when processing, storing, labeling, and distributing HCT/Ps, including required labeling information, stringent record keeping, and adverse event reporting.
The AATB has issued operating standards for tissue banking. Accreditation is voluntary, but compliance with these standards is a requirement to become an AATB-accredited tissue establishment. In addition, some states have their own tissue banking regulations. We are licensed or have permits for tissue banking in California, Florida, New York, Maryland, and other states that require specific licensing or registration.
National Organ Transplant Act. Procurement of certain human organs and tissue for transplantation is subject to the restrictions of the National Organ Transplant Act (NOTA), which prohibits the transfer of certain human organs, including skin and related tissue for valuable consideration, but permits the reasonable payment associated with the removal, transportation, implantation, processing, preservation, quality control and storage of human tissue and skin. We reimburse tissue banks for their expenses associated with the recovery, storage and transportation of donated human tissue they provide to us for processing. We include in our pricing structure amounts paid to tissue banks to reimburse them for their expenses associated with the recovery and transportation of the tissue, in addition to certain costs associated with processing, preservation, quality control and storage of the tissue, marketing and medical education expenses, and costs associated with development of tissue processing technologies. NOTA payment allowances may be interpreted to limit the amount of costs and expenses that we may recover in our pricing for our products, thereby reducing our future revenue and profitability.
Postmarket Requirements. After a device is cleared or approved for commercial distribution, numerous regulatory requirements apply. These include, but are not limited to, the FDA’s Quality System Regulations which cover the procedures and documentation of the design, testing, production processes, controls, quality assurance, labeling, packaging, storage and shipping of medical devices; the FDA’s general prohibition against promoting products for off-label uses; the Federal Medical Device Reporting regulation, which requires that manufacturers provide information to the FDA whenever there is evidence that reasonably suggests that a device may have caused or contributed to a death or serious injury or that a malfunction occurred which would be likely to cause or contribute to a death or serious injury upon recurrence; and the Reports of Corrections and Removals regulation, which requires manufacturers to report recalls and field corrective actions to the FDA if initiated to reduce a risk to health posed by the device or to remedy a violation of the FDCA.
We are also required to register with the FDA as a medical device manufacturer. As such, our manufacturing sites are subject to periodic inspection by the FDA for compliance with the FDA’s Quality System Regulations. These regulations require that we manufacture our products and maintain our documents in a prescribed manner with respect to design, manufacturing, testing and control activities. Further, we are required to comply with various FDA requirements and other legal requirements for labeling and promotion. If the FDA believes that a company is not in compliance with applicable regulations, it may issue a warning letter, institute proceedings to detain or seize products, issue a recall order, impose operating restrictions, enjoin future violations and assess civil penalties against that company, its officers or its employees and may recommend criminal prosecution to the U.S. Department of Justice (DOJ). Similar requirements to those outlined above also apply to tissue products.
Medical device regulations also are in effect in many of the countries in which we do business outside the United States. These laws range from comprehensive medical device approval and quality system requirements for some or all of our medical device products to simpler requests for product data or certifications. The number and scope of these requirements are increasing. Under the previous European Medical Devices Directive and its replacement the Medical Device Regulation (MDR) EU 2017/745, medical devices were required to meet the requirements and receive CE Mark Certification prior to marketing in the EU and European Economic Area. CE Mark Certification requires a comprehensive quality system program, comprehensive technical documentation and data on the product, which are then reviewed by a Notified Body for most products. A Notified Body is an organization designated by the national governments of the EU member states to make independent judgments about whether a product complies with the requirements established by each CE marking regulation. ISO 13485 is a recognized international quality standard designed to ensure that we develop and manufacture quality medical devices. Other countries have instituted regulations regarding medical devices. Compliance with these regulations requires extensive documentation, often including clinical reports for our products, revisions to labeling, and other requirements such as facility inspections to comply with the registration requirements. A recognized Notified Body or government agency audits our facilities annually to verify our compliance with these standards.
In the EU, our products that contain human-derived tissue, including demineralized bone material, are not medical devices as defined in the MDR. They are also not medicinal products as defined in Directive 2001/83/EC. Today, tissue regulations, if applicable, are different from one EU member state to the next. Because of the absence of a harmonized
regulatory framework and the proposed regulation for advanced therapy medicinal products in the EU, the approval process for human-derived cell or tissue-based medical products may be extensive, lengthy, expensive, and unpredictable.
Certain countries, as well as the EU, have issued regulations that govern products that contain materials derived from animal sources. Regulatory authorities are particularly concerned with materials infected with the agent that causes BSE. These regulations affect our biomaterial products for the spine, which contain material derived from bovine tissue. Although we take steps designed to provide that our products are safe and free of agents that can cause disease, products that contain materials derived from animals, including our products, may become subject to additional regulation, or even be banned in certain countries, because of concern over the potential for prion transmission. Significant new regulations, a ban of our products, or a movement away from bovine-derived products because of an outbreak of BSE could have a material and adverse effect on our business or our ability to expand our business. See “Risk Factors-Risks Related to Non-Compliance with Laws and Regulations - Certain of our products contain materials derived from animal sources and may become subject to additional regulation.”
We are subject to laws and regulations pertaining to healthcare fraud and abuse, including anti-kickback laws and physician self-referral laws that regulate how companies in the health care industry may market their products to hospitals and health care professionals and may compete by discounting the prices of their products. The delivery of our products is subject to regulation regarding reimbursement, and federal healthcare laws apply when a customer submits a claim for a product that is reimbursed under a federally funded healthcare program. These rules require that we exercise care in structuring our sales and marketing practices and customer discount arrangements. See “Risk Factors-Risks Related to Non-Compliance with Laws and Regulations - Oversight of the medical device industry might affect the way may sell medical devices and compete in the marketplace.”
Our international operations subject us to laws regarding sanctioned countries, entities and persons, customs, import-export, laws regarding transactions in foreign countries, the FCPA and local anti-bribery and other laws regarding interactions with healthcare professionals. Among other things, these laws restrict, and in some cases prohibit, United States companies from directly or indirectly selling goods, technology or services to people or entities in certain countries. In addition, these laws require that we exercise care in structuring our sales and marketing practices in foreign countries.
Our research, development and manufacturing processes involve the controlled use of certain hazardous materials. We are subject to country-specific, federal, state and local laws and regulations governing the use, manufacture, storage, handling and disposal of these materials and certain waste products. We believe that our environmental, health and safety (EHS) procedures for handling and disposing of these materials comply with the standards prescribed by the controlling laws and regulations. However, risk of accidental releases or injury from these materials is possible. These risks are managed to minimize or eliminate associated business impacts. In the event of this type of accident, we could be held liable for damages that may result, and any liability could exceed our resources. We could be subject to a regulatory shutdown of a facility that could prevent the distribution and sale of products manufactured there for a significant period of time and we could suffer a casualty loss that could require a shutdown of the facility in order to repair it, any of which could have a material and adverse effect on our business. Although we continuously strive to maintain full compliance with respect to all applicable global EHS laws and regulations, we could incur substantial costs to fully comply with future laws and regulations, and our operations, business or assets may be impacted.
In addition to the above regulations, we are and may be subject to regulation under country-specific federal and state laws, including, but not limited to, requirements regarding record keeping, and the maintenance of personal information, including personal health information. We also are subject to other present, and could be subject to possible future, local, state, federal and foreign regulations.
Healthcare providers that purchase medical devices generally rely on third-party payors, including the Medicare and Medicaid programs, and private payors, such as indemnity insurers, employer group health insurance programs and managed care plans, to reimburse all or part of the cost of the device. As a result, demand for our products is and will continue to depend in part on the coverage and reimbursement policies of these third-party and private payors. The manner in which reimbursement is sought and obtained varies based upon the type of payor involved and the setting in which the device is furnished and utilized. Reimbursement from Medicare, Medicaid and other third-party payors may be subject to periodic adjustments as a result of legislative, regulatory and policy changes and budgetary pressures. Possible reductions in, or eliminations of, coverage or reimbursement by third-party and private payors, or denial of, or provision of uneconomical reimbursement for new products, as a result of these changes may affect our customers’ ability to purchase our products. Any changes in the healthcare
regulatory, payment or enforcement landscape relative to our customers’ healthcare services may significantly affect our operations and revenue.
We have four facilities: our headquarters in Carlsbad, California, from which our orthobiologics and spinal implant products are designed, developed, and marketed and from which our more recently launched spinal implant products are inspected, kitted and distributed; a manufacturing and distribution facility in Irvine, California, from which most of our orthobiologics products are manufactured and all are distributed; office space in Wayne, Pennsylvania, where we design spinal implants and which facilitates our interactions with customers on the East Coast; and our European sales and marketing office in Lyon, France.
We inspect, kit, and distribute most of our spinal implant products through a third-party logistics provider facility in Olive Branch, Mississippi. We distribute our orthobiologics and spinal implant products in certain international markets through third-party logistics provider facilities in Belgium and the Netherlands.
Additional information regarding our facilities may be found in Part I, Item 2 of this report.
As of February 26, 2021, we had 421 employees, 67 of whom were engaged in research and development, 123 in manufacturing, 130 in sales and marketing and 101 in general and administrative activities.
We are subject to the informational requirements of the Securities Exchange Act of 1934, as amended, (the Exchange Act). In accordance with the Exchange Act, we file or furnish annual, quarterly and current reports, amendments to those reports, proxy statements and other information with the SEC. We make these reports and other information available free of charge on our website at www.seaspine.com under the investors page as soon as reasonably practicable after we electronically file such material with, or furnish it to, the SEC. All such reports were made available in this fashion during 2020.
The SEC maintains an internet site that contains reports, proxy and information statements and other information regarding issuers that file electronically with the SEC at www.sec.gov.
ITEM 1A. RISK FACTORS
Before you invest in our securities, you should be aware that our business faces numerous risks, including those described below, as well as general economic and business risks. The following discussion provides information concerning the material risks and uncertainties that we have identified and believe may adversely affect our business, our financial condition and our results of operations. Before you decide whether to invest in our securities, you should carefully consider these risks and uncertainties, together with all of the other information included in this report and in our other public filings, which could materially affect our business, financial condition or future results. If any of the risks described below actually occurs, our business, financial results, financial condition and stock price could be materially and adversely affected.
Summary of Risk Factors
The section provides a summary of many of the risks we are exposed to in the normal course of our business activities. The summary does not contain all of the information that may be important to you, and you should read the summary together with the more detailed discussion of risks set forth following this section as well as elsewhere in this report.
•Impacts of the COVID-19 pandemic could adversely affect our business, financial condition, and results of operations.
•We expect to incur losses for the foreseeable future and may not achieve or sustain profitability.
•We operate in a highly competitive industry and we may not compete successfully.
•We must successfully educate and train surgeons and their staff on the proper use of our products.
•Changes in third-party payment systems and in the healthcare industry may adversely impact our business.
•Industry trends have resulted in increased downward pricing pressure on medical services and products, which may affect our ability to sell our products at prices necessary to support our current business strategy.
•We may not develop new products in a timely and consistent manner.
•We may not maintain or grow our revenue if we are unable to maintain and expand our network of independent sales agents and stocking distributors.
•The failure to demonstrate the safety and efficacy of our products in clinical studies will adversely affect our sales.
•Our business could be harmed if any of our manufacturing, development or research facilities are damaged and/or our manufacturing processes are interrupted.
•We depend on a limited number of third-party suppliers for processing activities, components and raw materials. In particular, we obtain certain surface technology that we incorporate into our NanoMetalene products from a single supplier. The loss of supply of such technology could harm sales of certain of our products if we were to be unable to timely identify and obtain an alternative source of supply of FDA-approved comparable surface technology at an acceptable cost.
•Security breaches, loss of data and other disruptions could compromise sensitive information related to our business.
•Our success depends on the services of key members of our senior management and other key employees.
•We may have significant product liability exposure and our insurance may not cover all potential claims.
•We are exposed to significant uninsured liabilities.
•We are exposed to a variety of risks relating to our international sales and operations.
•We may be subject to continuing contingent liabilities of Integra.
•Our sales volumes and our operating results may fluctuate.
•We must maintain high levels of inventory, which could consume a significant amount of our resources and reduce our cash flows.
•Our future financial results could be adversely affected by impairments or other charges.
•Our future capital needs are uncertain and we may need to raise additional funds in the future, and such funds may not be available on acceptable terms or at all.
•We are subject to stringent medical device regulation and any adverse regulatory action may materially and adversely affect our financial condition and business operations.
•There is no guarantee that the FDA will grant 510(k) clearance or premarket approval, or that equivalent foreign regulatory authorities will grant the foreign equivalent, of our future products.
•Certain of our products are derived from human tissue or contain materials derived from animal sources and are or could be subject to additional regulations.
•Clinical studies are expensive and their results may not support our product candidate claims.
•If the third parties on which we rely to conduct our clinical studies do not perform as contractually required or expected, we may not commercialize our products.
•Oversight of the medical device industry might affect the way we sell medical devices and compete in the marketplace.
•Unfavorable negative publicity concerning both alleged improper methods of tissue recovery from donors and disease transmission from donated tissue could limit widespread acceptance of some of our products.
•We are subject to a wide range of requirements, regulations and laws due to our international operations.
•Regulations related to “conflict minerals” may force us to incur additional expenses, may make our supply chain more complex and may result in damage to our reputation with customers.
•We are subject to requirements relating to hazardous materials which may impose significant compliance costs on us.
•Our intellectual property rights may not provide meaningful commercial protection for our products.
•Intellectual property in our industry has been the source of litigation and other disputes, which is inherently costly and unpredictable.
•We may be subject to claims by third parties asserting that we have misappropriated their intellectual property.
•Our stock price has been and may continue to be volatile.
•Your ownership percentage may be diluted, including by our issuance of preferred stock with terms that could dilute the voting power or reduce the value of our common stock.
•We do not anticipate paying cash dividends.
Risks Related to the COVID-19 Pandemic
Our business, financial condition and results of operations will continue to be materially and adversely impacted in the near-term, and could be materially and adversely impacted in the long-term, by the COVID-19 pandemic.
The COVID-19 pandemic materially and adversely impacted our business and we expect the impact to continue through at least the duration of the pandemic as regions respond to local conditions. To date, the impacts include: the deferral of procedures using our products; disruptions or restrictions on the ability of many of our employees and of third parties on which we rely to work effectively, including because of stay-at-home orders and similar government actions; and temporary closures of our facilities and of the facilities of our customers and suppliers. As jurisdictions throughout the world continue to deal with and respond to the pandemic, the degree of the foregoing impacts may increase in scope or magnitude or we may experience additional material adverse impacts in one or more regions. Any other outbreaks of contagious diseases or other adverse public health developments in countries where we operate or where our customers or suppliers are located could also have a material and adverse effect on our business, financial condition and results of operations.
Because of the pandemic, surgeons and their patients were required, and in certain regions continue to be required, or are choosing, to defer procedures in which our products otherwise could be used, and many facilities that specialize in the procedures in which our products otherwise could be used temporarily closed or continue to be temporarily closed or operating at reduced hours. In addition, even after the pandemic subsides and/or governmental orders no longer prohibit or recommend against performing such procedures, patients may continue to defer such procedures out of concern of being exposed to COVID-19 or for other reasons. Deferrals of elective surgeries could result in delayed product launches if it takes longer than anticipated to collect feedback following an alpha launch. Further, facilities at which our products typically are used may not reopen or, even if they reopen, patients may elect to have procedures performed at facilities that are, or are perceived to be, lower-risk, such as ambulatory surgery centers, and our products may not be approved at such facilities, and we may be unable to have our products approved for use at such facilities on a timely basis, or at all.
The effect of the pandemic on the broader economy could also negatively affect demand for procedures using our products, both in the near- and long-term. For example, as a result of the impact of the pandemic, individuals have lost, and others may lose, access to their private health insurance plan if they have lost or lose their job. Any prolonged economic downturn or recession as a result of the pandemic could result in layoffs of employees and a significant increase in unemployment in the United States and elsewhere, which may continue even after the pandemic is contained. An impact to job status may extend for a prolonged period of time, beyond possible coverage periods through COBRA, or where the cost to maintain coverage may not be affordable to an individual. As most of the patients who use our products rely on third-party payors, including government programs and private health insurance plans, to cover the cost of our products, patients may lose coverage to our products, which may harm our business and results of operations.
Workforce limitations and travel restrictions resulting from government actions taken to contain the spread of COVID-19 has and will continue to adversely affect almost every aspect of our business. If a significant percentage of our workforce, or of the workforce of third parties on which we rely, cannot work, including because of illness or travel or government restrictions, our operations may be negatively affected. Because of government restrictions and social distancing guidelines in many countries around the world, there is an increased reliance on working from home for our workforce and on the workforce of third parties on which we rely. In response to state and local restrictions, we implemented work-from-home policies for all employees except certain key essential members involved in business-critical activities. In addition, most of our independent sales agents currently are working largely using virtual and online engagement tools and tactics, which may be less effective than our ordinary, in-person sales and marketing programs. In addition, we reduced access to our hands-on cadaveric training facilities in Carlsbad, California and Wayne, Pennsylvania which, in turn, adversely impacted our ability to educate and train surgeons and sales agents on the proper use of our products (which may make surgeons and sales agents less comfortable using, and therefore less likely to use, our products), and which we expect will also limit our ability to develop, and therefore launch, the products we believe will drive our future revenue growth on the timelines we anticipated previously, or at all. The change in the manner in which our workforce is functioning could also delay the launch of products we plan to launch in 2021 and beyond. It may also cause us not to timely submit required filings, including with the U.S. Securities and Exchange Commission, U.S. Food and Drug Administration (FDA), or other regulatory bodies, both in the U.S. and outside the U.S., any
of which by itself may have a negative effect on our business, such as by making us ineligible to conduct an offering under a Form S-3 registration statement, which generally takes less time and is less expensive than other means, such as conducting an offering under a Form S-1 registration statement. In addition, changes impacting workforce function at the FDA and other regulatory bodies, as well as changes impacting workforce function at the facilities at which we seek to have new products approved for use, could adversely impact the timing of when our new products are cleared for marketing and approved for use, either of which could adversely impact the timing of our ability to sell these new products and could have a material and adverse effect on our revenue growth. Conversely, we may face several challenges or disruptions upon a return back to the workplace if and when the pandemic subsides, including re-integration challenges by our employees and distractions to management related to such transition.
Further, disruptions in the manufacture and/or distribution of our products or in our supply chain may occur as a result of the pandemic, including for the reasons above, or other events that result in staffing shortages, production slowdowns, stoppages, or disruptions in delivery systems, any of which could materially and adversely affect our ability to manufacture and/or distribute our products, or to obtain the raw materials and supplies necessary to manufacture and/or distribute our products, in a timely manner, or at all. See “Risks Related to Manufacturing, Commercial Operations and Commercialization - If any of our manufacturing, development or research facilities are damaged and/or our manufacturing processes are interrupted, we could experience supply disruptions, lost revenues and our business could be seriously harmed” and “Risks Related to Manufacturing, Commercial Operations and Commercialization - We depend on a limited number of third-party suppliers for processing activities, components and raw materials and losing any of these suppliers, or their inability to provide us with an adequate supply of materials that meet our quality and other requirements, could harm our business” below.
We may also experience other unknown adverse impacts from the pandemic that cannot be predicted. For example, hospitals and other facilities at which we sell our products may renegotiate their purchase prices, including as a result of, or the perception they may be suffering, financial difficulty as a result of the pandemic. Similarly, facilities at which we seek to sell our products in the future may require price reductions relative to the price at which we previously expected to sell our products. Reduction in the prices at which we sell products to existing customers may have a material and adverse effect on our future financial results and reductions in the prices at which we expected to sell products to anticipated customers may have a material and adverse effect on our expectations for revenue growth. See “Risks Related to Pricing and Reimbursement and Industry Trends - Changes in third-party payment systems and in the healthcare industry may require us to decrease the selling price for our products, may reduce the size of the market for our products, or may eliminate a market, any of which could have a material and adverse effect on our financial performance” below.
Further, the global capital markets experienced, and we expect will continue to experience, disruption and volatility due to the pandemic, adversely impacting access to capital not only for us, but also for our customers and suppliers who need access to capital. Their inability to access capital in a timely manner, or at all, could adversely impact demand for our products and/or adversely impact our ability to manufacture and/or supply our products, any of which could have a material and adverse effect on our business. See “Risks Related to our Financial Results and Needs for Financing - Our future capital needs are uncertain and we may need to raise additional funds in the future, and such funds may not be available on acceptable terms or at all,” below.
The full extent to which the pandemic will, directly or indirectly, impact our business, results of operations and financial condition, including our sales, expenses, supply chain integrity, manufacturing capability, research and development activities, and employee-related compensation, is highly uncertain and cannot be predicted with reasonable accuracy at this time and will depend on future developments that are also highly uncertain and cannot be predicted with reasonable accuracy at this time, including, without limitation: (a) new information that may emerge concerning COVID-19, its contagiousness and/or virulence; (b) resurgences in COVID-19 transmission and infection following the easing or lifting of “stay-at-home” or other restrictions or following resumption of surgical procedures, whether as a result thereof, as a result of reinfection, as a result of a delay in the emergence of symptoms following infection (or reinfection) by COVID-19, or as a result of its ability to lay dormant following infection (or reinfection), and the adverse impact the foregoing may have on our business and financial condition, including because of the adverse impact on patients’ willingness to undergo procedures in which our products could be used; (c) actions required or recommended to contain or treat COVID-19, in light of any or all of the foregoing or other as-yet unanticipated developments, whether related to COVID-19 directly or indirectly; and (d) the direct and indirect economic impact, both domestically and abroad, of COVID-19 as a result of any or all of the foregoing, including actions taken by local, state, national and international governmental agencies, whether such impact affects customers, suppliers, or markets generally.
The pandemic also heightens the risks in certain of the other risk factors described in this report.
Risks Related to Product Development
We may not develop new products in a timely and consistent manner, and failure to do so may adversely affect the attractiveness of our overall product portfolio to our surgeon customers and negatively impact our sales and market share.
To be and remain competitive, we need to sunset legacy systems while introducing new products and enhancements or modifications to our existing products on a regular basis and successfully respond to technological advances. Doing so is technologically challenging and involves significant risks and uncertainty. Despite substantial investments of time and resources, our research and development efforts may not result in technically feasible new products. Even if technically feasible, the anticipated time and cost of obtaining regulatory clearance and/or approval and/or commercializing a new product may be too great to justify continued development. In addition, competitors could develop products that are more effective, are less expensive to manufacture, are priced more competitively or are ready for commercial introduction before our products. The introduction of new products by our competitors may lead us to reduce the prices of our products, may lead to reduced margins or loss of market share, and may render our products obsolete or noncompetitive. The success of any of our new product offerings or enhancement or modification to our existing products will depend on several factors, including our ability to:
•properly identify and anticipate surgeon and patient needs;
•develop new products or enhancements or modifications in a timely manner;
•obtain regulatory clearance and/or approvals for new products or product enhancements or modifications in a timely manner;
•achieve timely alpha and/or full commercial launches of new products;
•provide adequate training to potential users of new products and product enhancements or modifications;
•receive adequate reimbursement approval of third-party payors such as Medicaid, Medicare and private insurers; and
•develop an effective marketing and distribution network.
If we cannot develop technically and commercially viable new products and enhancements or modifications to our existing products on a consistent basis and before our competitors, our prospects could be materially and adversely affected. Our ability to develop and launch new products and enhancements in a timely and consistent manner may be adversely impacted due to the effects of the COVID-19 pandemic in light of the reduced access to our hands-on cadaveric training facilities in Carlsbad, California and Wayne, Pennsylvania, or if we are required to or elect to temporarily close them, the change in the manner in which our workforce is functioning and the changes impacting workforce function at the FDA and other regulatory bodies, as well as changes impacting workforce function at the facilities at which we seek to have new products approved for use.
It is also important that we carefully manage our introduction of new products and enhancements or modifications to our existing products. If potential customers delay purchases until new or enhanced or modified products are available, it could negatively impact our sales. In addition, to the extent we have excess or obsolete inventory as we transition to new or enhanced or modified products, it would result in margin reducing write-offs for obsolete inventory, and our results of operations may suffer.
There is no guarantee that the FDA will grant 510(k) clearance or premarket approval, or that equivalent foreign regulatory authorities will grant the foreign equivalent, of our future products, and failure to obtain necessary clearances or approvals for our future products would adversely affect our ability to grow our business.
In general, unless an exemption applies, a medical device and modifications to the device or its indications must receive either premarket approval or premarket clearance from the FDA before it can be marketed in the U.S. While in the past we have received such clearances, we may not succeed in the future in receiving approvals and clearances in a timely manner, or at all. The process of obtaining approval or clearance from the FDA and comparable foreign regulatory agencies for new products, or for enhancements or modifications to existing products, could:
•take significant time;
•require the expenditure of substantial resources;
•involve rigorous and expensive pre-clinical and clinical testing, as well as post-market surveillance;
•involve modifications, repairs or replacements of our products; and
•result in limitations on the indicated uses of our products.
Some of our new products will require FDA 510(k) clearance or approval of a premarket approval application, or PMA, prior to being marketed. Any modification to a 510(k)-cleared device that could significantly affect its safety or effectiveness, including significant design and manufacturing changes, or that would constitute a major change in its intended use, design or manufacture, requires a new 510(k) clearance or, possibly, approval of a PMA. Similarly, modifications to PMA-approved products may require submission and approval of a PMA supplement. The FDA requires every manufacturer to determine whether a new 510(k) or PMA is needed in the first instance, and the FDA has issued guidance on assessing modifications to 510(k)-cleared and PMA-approved devices to assist manufacturers with making these determinations. However, the FDA may review any such determination and the FDA may not agree with our determinations regarding whether new clearances or approvals are necessary. We have modified some of our 510(k)-cleared products and have determined, based on our understanding of FDA guidance, that certain changes did not require new 510(k) clearances. If the FDA disagrees with our determination and requires us to seek new 510(k) clearances, or PMA approval, for modifications to our cleared products, we may have to stop marketing or distributing our products, we may need to recall the modified product until we obtain clearance or approval, and we may be subject to significant regulatory fines or penalties. Significant delays in receiving clearance or approval, or failing to receive clearance or approval for our new products would have a material and adverse effect on our ability to expand our business.
Outside the U.S., clearance or approval procedures can vary among countries and can involve additional product testing and validation and additional administrative review periods. The time required to obtain clearance or approval in other countries might differ from that required to obtain FDA clearance or approval. The regulatory process in other countries may include all of the risks to which we are exposed in the U.S., as well as other risks. Favorable regulatory action in one country does not ensure favorable regulatory action in another, but a failure or delay in obtaining regulatory clearance or approval in one country may have a negative effect on the regulatory process in others. Failure to obtain clearance or approval in other countries or any delay or setback in obtaining such clearance or approval have a material and adverse effect on our business, including that our products may not be cleared or approved for all indications requested, which could limit the uses of our products and have an adverse effect on product sales.
In the EEA, we must inform the Notified Body that carried out the conformity assessment of the medical devices we market or sell in the EEA of any planned substantial change to our quality system or any significant change to our devices. The Notified Body will then assess the change and verify whether it affects the products’ conformity with the Essential Requirements or the conditions for the use of the device. If the assessment is favorable, the Notified Body may issue a new CE Certificate of Conformity or an addendum to the existing CE Certificate of Conformity. If it is not, we may not be able to continue to market and sell the applicable product in the EEA, which could have a material and adverse effect on our business, results of operations and financial condition.
We cannot be certain that we will receive required approval or clearance from the FDA and foreign regulatory agencies for new products, including modifications to existing products, on a timely basis, or at all. Failing to receive approval or clearance for new products on a timely basis would have a material and adverse effect on our financial condition and results of operations.
Clinical studies are expensive and subject to extensive regulation and their results may not support our product candidate claims or may result in the discovery of adverse effects.
In developing new products or new indications for, or modifications to, existing products, we may conduct or sponsor pre-clinical testing, clinical studies or other clinical research. We are conducting post-market clinical studies of some of our products to gather information about their performance or optimal use. The data collected from these clinical studies may ultimately be used to support additional market clearance or approval for these products or future products. If any of our new products require premarket clinical studies, these studies are expensive, the outcomes are inherently uncertain and they are subject to extensive regulation and review by numerous governmental authorities both in the U.S. and abroad, including by the FDA and, if federal funds are involved or if an investigator or site has signed a federal assurance, are subject to further regulation by the Office for Human Research Protections and the National Institutes of Health. For example, clinical studies must be conducted in compliance with FDA regulations, local regulations, and according to principles and standards collectively called “Good Clinical Practices.” Failure to comply with applicable regulations could result in regulatory and legal
enforcement action, including fines, penalties, suspension of studies, and also could invalidate the data and make it unusable to support an FDA submission.
Even if any of our future premarket clinical studies are completed as planned, we cannot be certain that their results will support our product candidates and/or proposed claims or that the FDA or foreign authorities and Notified Bodies will agree with our interpretation and conclusions regarding the data they generate. Success in pre-clinical studies and early clinical studies does not ensure that later clinical studies will succeed, and we cannot be sure that the results of later studies will replicate those of earlier or prior studies. The clinical study process may fail to demonstrate that our product candidates are safe and effective for the proposed indicated uses, which could cause us to abandon a product candidate and may delay development of others. Any delay or termination of our clinical studies will delay the filing of our product submissions and, ultimately, our ability to commercialize our product candidates and generate revenues. It is also possible that patient subjects enrolled in our clinical studies of our marketed products will experience adverse side effects that are not currently part of the product candidate’s profile and, if so, these findings may result in lower market acceptance, which could have a material and adverse effect on our business, results of operations and financial condition.
Further, the COVID-19 pandemic and associated shelter-in-place orders could limit or restrict our ability or the ability of others on which we rely to initiate, conduct or continue our clinical studies of some of our products. Delays and disruption in such studies could result in delays for expanded FDA and other regulatory clearance or approval of our products.
If the third parties on which we rely to conduct our clinical studies and to assist us with pre-clinical development do not perform as contractually required or expected, we may not obtain regulatory clearance, approval or a CE Certificate of Conformity for or commercialize our products.
We often must rely on third parties, such as contract research organizations, medical institutions, clinical investigators and contract laboratories, to assist in conducting our clinical studies and other development activities. If these third parties do not successfully carry out their contractual duties, comply with applicable regulatory obligations or meet expected deadlines, or if these third parties need to be replaced, or if the quality or accuracy of the data they obtain is compromised due to failing to adhere to clinical protocols, to applicable regulatory requirements or otherwise, our pre-clinical development activities and clinical studies may be extended, delayed, suspended or terminated. Under these circumstances, we may not be able to obtain regulatory clearance/approval or a CE Certificate of Conformity for, or successfully commercialize, our products on a timely basis, if at all, and our business, operating results and prospects may be materially and adversely affected.
Risks Related to Manufacturing, Commercial Operations and Commercialization
We operate in an industry and in market segments that are highly competitive and we may not compete successfully.
There is intense competition among medical device companies that serve the spinal surgery market. We compete with established medical technology companies, as well as earlier-stage companies that often have differentiated technology and potentially superior solutions for the challenges facing our neurosurgeon and orthopedic spine surgeon customers and their patients. Our primary competitors include Alphatec Spine, Baxter, Bioventus, Cerapedics, DePuy Synthes Spine (a Johnson & Johnson company), Globus Medical, Medtronic, NuVasive, Orthofix, Stryker, Surgalign, XTANT Medical, Zimmer-Biomet and many smaller, biologically-focused companies.
Many of our competitors may have access to greater financial, technical, research and development, marketing, manufacturing, sales, distribution, administrative, consulting and other resources than we do. Our competitors may be more effective at developing products, at differentiating their products from our and other competitor products and at designing, executing, analyzing the results of and publishing data from clinical studies. Our competitors may also have: stronger intellectual property portfolios; broader spine surgery product offerings and products supported by more extensive clinical data; more established distribution networks; entrenched relationships with surgeons; significantly greater name recognition and more recognizable trademarks for products similar to the products we sell; more established relationships with healthcare providers and payors; greater experience in obtaining and maintaining FDA and other regulatory clearances or approvals for products and product enhancement; and greater experience in launching, marketing and selling products than we do. Many of our competitors specialize in a specific product or focus on a particular market segment, making it more difficult for us to increase our overall market position. The frequent introduction by competitors of products that are, or claim to be, superior to our products, or that are alternatives to our existing or planned products may also create market confusion that may make it difficult to differentiate the benefits of our products over competing products. In addition, the entry of multiple new products
and competitors may lead some of our competitors to employ pricing strategies that could adversely affect the pricing of our products and pricing in the spine market generally.
Our competitive position depends on our ability to achieve market acceptance for our current and future products. Market acceptance for any of our products requires, among other things, that we timely secure regulatory clearance and/or approval; demonstrate the value of our products, both to our surgeon customers and payors, which may require that we collect clinical data and/or conduct clinical studies; effectively educate and train our surgeon customers and their staff on the proper use of our products; obtain and maintain coverage and adequate reimbursement for our products, both within and outside the U.S., including under Medicare and Medicaid and from private payors; attract and retain a network of independent sales agents and stocking distributors focused on neurosurgeons and orthopedic spine surgeons; develop and execute an effective marketing strategy; protect the proprietary positions of our products, including through patent protection; and consistently produce quality products in sufficient quantities to meet demand. Significant risks are associated with each of these activities and other activities required to achieve market acceptance of both our current and future products, including risks inherent in collaborations, such as with restor3d, Inc. and 7D Surgical, Inc., or use of nascent manufacturing or imaging techniques, such as additive processing (more commonly known as 3D printing) or advanced optical technologies and machine version-based registration algorithms. Some of these risks are more fully described elsewhere in this “Risk Factors” section.
In addition, at any time our competitors or other companies may develop alternative treatments, products or procedures for the treatment of spine disorders that compete directly or indirectly with our products, including ones that prove to be superior to our products.
For these reasons, we may not compete successfully against our existing or potential competitors. Any such failure could lead us to modify our strategy, to lower our prices, or to increase the commissions we pay on sales of our products and could have a significant adverse effect on our business, financial condition and results of operations. If we cannot compete effectively, our sales and operating results may suffer.
To be commercially successful, we must effectively demonstrate to neurosurgeon and orthopedic spine surgeons the merits of our products compared to those of our competitors.
Neurosurgeons and orthopedic spine surgeons play a significant role in determining the course of treatment and, ultimately, the product used to treat a patient. As a result, our success depends, in large part, on demonstrating to these surgeons the value of our products in the treatment of their patients. To do so requires that we continue to invest in medical education and training and, along with our independent sales agents and stocking distributors, demonstrate the merits of our products and underlying technology compared to those of our competitors. The primary manner in which we offer to educate and train surgeons and their staff on the proper use of our products is at our hands-on cadaveric training facilities in Carlsbad, California and Wayne, Pennsylvania. During 2020, those facilities were temporarily closed due to the pandemic. Access to those facilities continues to be reduced due to the pandemic and in the future we may be required to or elect to temporarily close one or both of them due to the pandemic. Any limits on our ability to use either or both of those facilities will adversely affect our ability to effectively demonstrate the merits of our products compared to those of our competitors.
Surgeons who do not use our products may be hesitant to do so for the following or other reasons:
•lack of experience with our products, techniques, or technologies, or with the equipment necessary to use any of the foregoing;
•existing relationships with those who sell competitive products;
•the time required for surgeon and medical staff education and training on new products, techniques and equipment and technologies;
•lack or perceived lack of clinical evidence supporting patient benefit relative to competing products;
•our products not being included on hospital formularies, in integrated delivery networks or on group purchasing organization preferred vendor lists;
•less attractive coverage and/or reimbursement within healthcare payment systems for our products and procedures compared to other products and procedures;
•other costs associated with introducing new products and the equipment necessary to use new products; and
•perceived risk of liability that could be associated with the use of new products, techniques or technologies.
In addition, we believe recommendations and support of our products by influential neurosurgeons and orthopedic spine surgeons are essential for market acceptance and adoption. If we do not receive support from such surgeons or long-term data does not show the benefits of using our products, surgeons may not use our products.
If we are not successful in convincing surgeons of the merits of our products, we may not maintain or grow our sales or achieve or sustain profitability.
We must successfully educate and train surgeons and their staff on the proper use of our products.
Although most neurosurgeons and orthopedic spine surgeons may have adequate knowledge on how to use most of our products based on their clinical training and experience, we believe that the most effective way to introduce and build market demand for our products is by directly training such surgeons in the use of our products. Convincing surgeons to dedicate the time and energy necessary for adequate training is challenging, and we cannot assure you we will succeed in these efforts. If surgeons are not properly trained, they may not use our products, and, as a result, we may not maintain or grow our sales or achieve or sustain profitability. If surgeons are not properly trained they may also misuse or ineffectively use our products, which may result in unsatisfactory patient outcomes, patient injury, negative publicity or lawsuits against us, any of which could have a significant adverse effect on our business, financial condition and results of operations.
Although we believe our training methods for surgeons are conducted in compliance with FDA and other applicable regulations developed both nationally and in third countries, if the FDA or other regulatory agency determines that our training constitutes promotion of an unapproved use or promotion of an intended purpose not covered by the CE mark affixed to our products or FDA approved labeling, they could request that we modify our training or subject us to regulatory enforcement actions, including the issuance of a warning letter, injunction, seizure, civil fine and criminal penalty. See also “Risks Related to Non-Compliance with Laws and Regulations - Oversight of the medical device industry might affect the way we sell medical devices and compete in the marketplace" below.
If we are unable to maintain and expand our network of independent sales agents and stocking distributors, we may not maintain or grow our revenue.
Our ability to generate revenue depends on the sales and marketing efforts of independent sales agents and stocking distributors. Some of our independent sales agents account for a significant portion of our sales volume. If our independent sales agents and stocking distributors fail to adequately promote, market and sell our products, our sales could significantly decrease. Due to the impacts of the COVID-19 pandemic, most of our independent sales agents currently are working largely using virtual and online engagement tools and tactics, which may be less effective than our ordinary, in-person sales and marketing programs.
Further, we face significant challenges and risks in managing our geographically dispersed distribution network and retaining the independent sales agents and stocking distributors who make up that network, and as we launch new products and increase our marketing efforts with respect to existing products, we plan to expand the reach of our marketing and sales efforts and may need to hire new independent sales agents and stocking distributors. Independent sales agents and stocking distributors require significant technical expertise in various areas such as spinal care practices, spine injuries and disease, and spinal health and they require training and time to achieve full productivity. We may not attract or retain qualified independent sales agents or stocking distributors or enter into agreements with them on favorable or commercially reasonable terms, if at all. This could be due to a number of factors, including, but not limited to, perceived deficiencies, or gaps, in our existing product portfolio, intense competition for independent sales agents’ services, or because of the disruption associated with restrictive covenants to which distributors may be subject and potential litigation and expense associated therewith. We may also experience unforeseen disengagement from independent sales agents who have worked with us for many years. Even if we enter into agreements with additional qualified independent sales agents or stocking distributors, it often takes 6 to 12 months for new sales agents or stocking distributors to reach full operational effectiveness and they may not generate revenue as quickly as we expect them to, commit the necessary resources to effectively market and sell our products, or ultimately succeed in selling our products. Our success will depend largely on our ability to continue to hire, train, retain and motivate qualified independent sales agents and stocking distributors. If we cannot expand our sales and marketing capabilities domestically and internationally, if we fail to train new independent sales agents and stocking distributors adequately, or if we experience high turnover in our sales network, we may not commercialize our products adequately, or at all, which would adversely affect our business, results of operations and financial condition.
Moreover, our independent sales agents and stocking distributors are not our employees, we have limited control over
their activities and, generally, we do not enter into exclusive relationships with them. If one or more of them were to be retained by a competitor, whether or an exclusive or non-exclusive basis, they may divert business from us to our competitor, which could materially and adversely affect our sales.
Sales of, or the price at which we sell, our products may be adversely affected unless the safety and efficacy of our products, alone and relative to competitive products, is demonstrated in clinical studies.
Generally, we have obtained 510(k) clearance to manufacture, market and sell the products we market in the U.S. and the right to affix the CE mark to the products we market in the European Economic Area, or EEA. To date, we have not been required to generate new clinical data to support our 510(k) clearances, CE marks, or product registrations in other countries. However, the EU Medical Device Regulations, which will replace the existing medical device directives in May 2021, require submission of certain pre- and post-market data to maintain our CE marks. Additionally, we recently completed an analysis of which of our product systems will require submission of clinical data pursuant to MEDDEV 2.7.1 rev 4, which sets forth the European Commission’s guidance on the clinical evaluation of medical devices. Accordingly, and in line with our vision to deliver clinical value, we have commenced clinical data collection activities for certain of our marketed products as more fully described elsewhere in this "Risk Factors" section.
In part due to the increased emphasis on the delivery of more cost-effective treatments, purchasing decisions of our customers increasingly will be based on clinical data that demonstrates the value of our products or the effectiveness of our products relative to others. Conducting clinical studies is expensive and time-consuming and outcomes are uncertain. See “Risks Related to Product Development - Clinical studies are expensive and subject to extensive regulation and their results may not support our product candidate claims or may result in the discovery of adverse effects,” above. We may elect not to, or may be unable to, fund the clinical studies necessary to generate the data required for all of our products to compete effectively, in part due to the breadth of our product portfolio. Currently, we do not expect to undertake such clinical studies for all of our products and only expect to do so where we anticipate the benefits will outweigh the costs on a risk-adjusted basis. However, even when we elect and are able to fund such clinical studies on one or more of our products, such studies may not succeed. Data we generate may not be consistent with our existing data and may demonstrate less favorable safety or efficacy, which could reduce demand for our products and negatively impact future sales. Neurosurgeons and orthopedic spine surgeons may be less likely to use our products if more robust, or any, clinical data supporting the safety and efficacy of competing products is available. If we are unable to or unwilling to generate clinical data supporting the safety and effectiveness of our products, our business, results of operations and financial condition could be materially and adversely affected.
Further, future patient studies or clinical experience may indicate that treatment with our products does not improve patient outcomes.
With the passage of the American Recovery and Reinvestment Act of 2009, funds have been appropriated for the U.S. Department of Health and Human Services’ Healthcare Research and Quality to conduct comparative effectiveness research to determine the effectiveness of different drugs, medical devices, and procedures in treating certain conditions and diseases. Some of our products or procedures performed with our products could become the subject of such research. It is unknown what effect, if any, this research may have on our business. Further, future research or experience may indicate that treatment with our products does not improve patient outcomes or improves patient outcomes less than we initially expected. Such results would reduce demand for our products, affect sustainable reimbursement from third-party payers, significantly reduce our ability to achieve expected revenue, and could cause us to withdraw our products from the market and could prevent us from sustaining or increasing profitability. Moreover, if future results and experience indicate that our products cause unexpected or serious complications or other unforeseen negative effects, we could be subject to significant legal liability, negative publicity, and damage to our reputation, and we could experience a dramatic reduction in sales of our products, all of which would have a material adverse effect on our business, financial condition and results of operations. The spine medical device market has been particularly prone to potential product liability claims that are inherent in the testing, manufacture and sale of medical devices and products for spine surgery procedures.
If any of our manufacturing, development or research facilities are damaged and/or our manufacturing processes are interrupted, we could experience supply disruptions, lost revenues and our business could be seriously harmed.
Damage to our manufacturing, development or research facilities or disruption to our business operations for any reason, including due to natural disaster (such as earthquake, wildfires and other fires or extreme weather), power loss, communications failure, unauthorized entry or other events, such as a flu or other health epidemic (such as the result of the COVID-19 pandemic), could cause us to discontinue development and/or manufacturing of some or all of our products for an undetermined
period of time. The property damage and business interruption insurance coverage on these facilities that we maintain might not cover all losses under such circumstances, and we may not be able to renew or obtain such insurance in the future on acceptable terms with adequate coverage or at reasonable costs. If our facilities were damaged, they could be difficult to replace and could require substantial lead time to repair or replace. In particular, we manufacture our orthobiologics products in one facility in Irvine, California and any damage to that facility could adversely affect our ability to timely satisfy demand for those products. Out of an abundance of caution in October 2020, we relocated part of our orthobiologics finished goods inventory from our Irvine facility to our Carlsbad office due to the threat of the Silverado Fire that was causing evacuations throughout Orange County, California. Disruptions to our business operations may result from damage to the facilities of, or disruption to the business operations of, our suppliers. For example, if we are unable to obtain disposables or other materials required to maintain “clean room” sterility in our Irvine facility, we may be unable to continue to manufacture products at that facility, which products account for approximately 50% of our total revenue. Any significant disruption to our manufacturing operations and to our ability to meet market demand likely would have an adverse impact on our sales and revenues as key stakeholders, including our independent sales agents and stocking distributors and surgeon customers, transition to what they perceive as more reliable sources of products.
We depend on a limited number of third-party suppliers for processing activities, components and raw materials and losing any of these suppliers, or their inability to provide us with an adequate supply of materials that meet our quality and other requirements, could harm our business.
Outside suppliers, some of whom are sole-source suppliers, such as PcoMed (discussed below), provide us with products and raw materials and components used in manufacturing our orthobiologics and spinal implant products. We strive to maintain sufficient inventory of products, raw materials and components so that our production will not be significantly disrupted if a particular product, raw material or component is not available to us for a period of time, including as a result of a supplier's loss of its ISO or other certification or as a result of any of the disruptions described above under the risk factor titled “If any of our manufacturing, development or research facilities are damaged and/or our manufacturing processes are interrupted, we could experience supply disruptions, lost revenues and our business could be seriously harmed.” In addition, some of our suppliers may choose to discontinue making their products available in the EU rather than follow MDR, which would require us to identify alternate supply sources for those products. Any such disruption in our production could harm our reputation, business, financial condition and results of operations.
We have historically received, and expect to continue to receive, certain surface technology that is incorporated into our NanoMetalene products under a supply agreement with PcoMed. The net sales of our NanoMetalene products that incorporated such technology represented approximately 12% of our revenue for the year ended December 31, 2020. We entered into a new supply agreement with PcoMed on March 1, 2021, which terminates in January 2024. PcoMed currently serves as our sole supplier for the technology. If PcoMed is unable to meet our demand for the technology or if the supply of the technology to us is otherwise disrupted for any reason, including because of the termination of our supply agreement, our business could be adversely impacted. Furthermore, if we were to experience a loss of supply of the technology, including because we fail to comply with material obligations under the supply agreement or if it were terminated for any reason, and we were unable to timely identify and obtain an alternative source of supply of FDA-approved comparable technology at an acceptable cost, we could lose rights to technology that is important to our products and our business.
Although we believe there are alternative supply sources, including for the surface technology we currently obtain from PcoMed, replacing our suppliers may be impractical or difficult in many instances. For example, we could have difficulty obtaining similar services or products from other suppliers that are acceptable to the FDA or other foreign regulatory authorities and who are able to provide the appropriate supply volumes at an acceptable cost. In addition, if we are required to transition to new suppliers for certain services or components of our products, the use of services, components or materials furnished by these alternative suppliers could require us to alter our operations, and if we are required to change the manufacturer of a critical component of our products, we will have to verify that the new manufacturer maintains facilities, procedures and operations that comply with our quality and applicable regulatory requirements, which could further impede our ability to manufacture our products in a timely manner. Transitioning to a new supplier could be time-consuming and expensive, may result in interruptions in our operations and product delivery, could affect the performance specifications of our products or could require that we modify the design of those systems.
If we are unable to obtain sufficient quantities of spinal implant products, raw materials or components that meet our quality and other requirements on a timely basis for any reason, we may not produce sufficient quantities of our products to meet market demand until a new or alternative supply source is identified and qualified and, as a result, we could lose customers, our reputation could be harmed and our business could suffer. In 2013, we experienced supply shortages in collagen
ceramic matrix bone void fillers, which adversely affected sales of our orthobiologics products, even after the supply shortage was resolved. Furthermore, an uncorrected defect or supplier’s variation in a component or raw material that is incompatible with our manufacturing, unknown to us, could harm our ability to manufacture products.
Further, under the FDASIA, which includes the Medical Device User Fee Amendments of 2012, as well as other medical device provisions, all U.S. and foreign manufacturers must have a FDA Establishment Registration and complete Medical Device listings for sales in the U.S. While we believe that our facilities materially comply with these requirements, we also source products from foreign contract manufacturers. It is possible that some of our foreign contract manufacturers will not comply with applicable requirements and choose not to register with the FDA. In such an event, we will need to determine if there are alternative foreign contract manufacturers who comply with the applicable requirements. If such a foreign contract manufacturer is a sole supplier of one of our products, there is a risk that we may not be able to source another supplier.
Furthermore, we rely on a small number of tissue banks accredited by the American Association of Tissue Banks for the supply of human tissue, a crucial component of our orthobiologics products that serve as bone graft substitutes. Any failure to obtain tissue from these sources or to have the tissue processed by these sources for us in a timely manner will interfere with our ability to meet demand for our orthobiologics products effectively. The processing of human tissue into orthobiologics products is labor intensive and maintaining a steady supply stream is challenging. In addition, due to seasonal changes in mortality rates, some scarce tissues used for our orthobiologics products are at times in particularly short supply. If governments require additional donor testing due to COVID-19, this could also strain the supply of tissue. We cannot be certain that our supply of human tissue from our suppliers will be available at current levels or will meet our needs or that we will be able to successfully negotiate commercially reasonable terms with other accredited tissue banks.
Unfavorable media reports or other negative publicity concerning both alleged improper methods of tissue recovery from donors and disease transmission from donated tissue could limit widespread acceptance of some of our products.
Unfavorable reports of improper or illegal tissue recovery practices, both in the U.S. and internationally, as well as incidents of improperly processed tissue leading to the transmission of disease, may affect the rate of future tissue donation and market acceptance of technologies incorporating human tissue. In addition, negative publicity could cause the families of potential donors to become reluctant to donate tissue to for-profit tissue processors. For example, the media has reported examples of alleged illegal harvesting of body parts from cadavers and resulting recalls conducted by certain companies selling human tissue-based products affected by the alleged illegal harvesting. These reports and others could have a negative effect on our tissue regeneration business.
Risks Related to Pricing and Reimbursement and Industry Trends
Changes in third-party payment systems and in the healthcare industry may require us to decrease the selling price for our products, may reduce the size of the market for our products, or may eliminate a market, any of which could have a material and adverse effect on our financial performance.
Our operations may be substantially affected by fundamental changes in the political, economic and regulatory landscape of the healthcare industry. Government and private sector initiatives to limit the growth of healthcare costs are continuing in the U.S., and in many other countries where we do business, causing the marketplace to put increased emphasis on the delivery of more cost-effective treatments. These initiatives include price regulation, competitive pricing, coverage and payment policies, comparative effectiveness of therapies, technology assessments and managed-care arrangements.
Maintaining and growing sales of our products depends on the availability of adequate coverage and reimbursement from third-party payors, both within and outside the U.S., including government programs such as Medicare and Medicaid, private insurance plans and managed care organizations. Hospitals and other healthcare providers that purchase our products generally rely on third-party payors to cover all or part of the costs associated with the procedures performed with our products, including the cost to purchase our product. Both the patients’ and our customers’ access to adequate coverage and reimbursement for the procedures performed with our products by government and private insurance plans is central to the acceptance of our current and future products. We may be unable to sell our products on a profitable basis, or at all, if third-party payors deny coverage or reduce their levels of payment. In addition, if our cost of production increases at a rate greater than increases in reimbursement levels for our products, our profitability may be adversely affected.
The healthcare industry, both within and outside the U.S., has experienced a trend toward cost containment as government and private insurers seek to control rising healthcare costs by imposing lower payment and negotiating reduced contract rates with service providers. Third-party payors continually review their coverage and reimbursement policies for procedures
involving the use of our products and can, without notice, eliminate or reduce coverage or reimbursement for our products. For example, in the past, a major national third-party insurer in the U.S. reduced coverage (from all or most cases to limited indications) for biomechanical devices (e.g., spine cages) used in cervical fusion procedures, stating that the devices had not been shown to be more effective than bone graft. In addition, certain insurers have limited coverage for vertebral fusions in the lumbar spine and other insurers may adopt similar coverage decisions in the future. Patients covered by these insurers may be unwilling or unable to afford lumbar fusion surgeries to treat their conditions, which could materially harm or limit our ability to sell our products designed for such surgeries. Further, third-party payors of hospital services and hospital outpatient services annually revise their payment methodologies, which could result in stricter standards for or the elimination or reduction of reimbursement of hospital charges for certain medical procedures.
Further, in the U.S., several provisions of the U.S. Patient Protection and Affordable Care Act (the Affordable Care Act) and the Health Care and Education Reconciliation Act of 2010 address access to health care products and services and establish certain fees for the medical device industry. These provisions may be modified, repealed, or otherwise invalidated, in whole or in part. Future rulemaking could affect rebates, prices or the rate of price increases for health care products and services, or required reporting and disclosure. We cannot predict the timing or impact of any future rulemaking or changes in the law.
To the extent we sell our products internationally, market acceptance may depend, in part, upon the availability of coverage and reimbursement within prevailing healthcare payment systems. Reimbursement and healthcare payment systems in international markets vary significantly by country. As in the U.S., our products may not obtain coverage and reimbursement approvals in a timely manner, if at all, in a particular international market. In addition, even if we obtain country-specific coverage and reimbursement approvals, we could incur considerable expense to do so. Our failure to obtain such coverage and approvals would negatively affect market acceptance of our products in the international markets in which such failure occurs and the expenses incurred in connection with obtaining such coverage and approvals could outweigh the benefits of obtaining them.
If the trend by governmental agencies and other third-party payors to reduce coverage of and/or reimbursement for procedures using our products continues, our business, results of operations and financial condition could be materially and adversely affected. Further, we cannot be certain that, under current and future payment systems, the cost of our products will be adequately incorporated into the overall cost of the procedure and, accordingly, we cannot be certain that the procedures performed with our products will be reimbursed at a cost-effective level, or at all.
Industry trends have resulted in increased downward pricing pressure on medical services and products, which may affect our ability to sell our products at prices necessary to support our current business strategy.
The trend toward healthcare cost containment through aggregating purchasing decisions and industry consolidation, along with the growth of managed care organizations, has placed increased emphasis on the delivery of more cost-effective medical therapies. For example:
•There has been consolidation among healthcare facilities and purchasers of medical devices, particularly in the U.S. One of the results of such consolidation is that group purchasing organizations, integrated delivery networks and large single accounts use their market power to consolidate purchasing decisions, which intensifies competition to provide products and services to healthcare providers and other industry participants, resulting in greater pricing pressures and the exclusion of certain suppliers from important market segments. For example, some group purchasing organizations negotiate pricing for its member hospitals and require us to discount, or limit our ability to increase, prices for certain of our products. In particular, certain of our DBM products are priced at a premium to competitors' DBM products and a significant price reduction could result in a material adverse effect on our profitability.
•Surgeons increasingly have moved from independent, out-patient practice settings toward employment by hospitals and other larger healthcare organizations, which align surgeons’ product choices with their employers’ price sensitivities and adds to pricing pressures. Hospitals have introduced and may continue to introduce new pricing structures into their contracts to contain healthcare costs, including fixed price formulas and capitated and construct pricing.
•Certain hospitals provide financial incentives to doctors for reducing hospital costs (known as gainsharing), rewarding physician efficiency (known as physician profiling) and encouraging partnerships with healthcare service and goods providers to reduce prices.
•Existing and proposed laws, regulations and industry policies, in both domestic and international markets, regulate or seek to increase regulation of sales and marketing practices and the pricing and profitability of companies in the healthcare industry.
More broadly, other provisions of the Affordable Care Act could meaningfully change the way healthcare is developed and delivered in the U.S., and may adversely affect our business and results of operations. For example, the Affordable Care Act encourages hospitals and physicians to work collaboratively through shared savings programs, such as accountable care organizations, as well as other bundled payment initiatives, which may ultimately result in the reduction of medical device purchases and the consolidation of medical device suppliers used by hospitals. It is unclear what the full impact of the legislation will be. Some of the provisions of the Affordable Care Act have yet to be fully implemented, and certain provisions have been subject to legal and Congressional challenges. Persisting uncertainty with respect to the scope and effect of certain provisions of the Affordable Care Act have made compliance costly. A case challenging the constitutionality of the Affordable Care Act's individual mandate is currently before the Supreme Court of the United States. We cannot predict whether the Affordable Care Act will be repealed, replaced, or modified, or how such repeal, replacement or modification may be timed or structured. The change in Presidential Administration may also result in new agency priorities, rulemakings, and legislation, the scope and effect of which cannot be predicted. As a result, we cannot predict accurately what healthcare programs and regulations will ultimately be implemented at the U.S. federal or state level, or the effect of any future legislation or regulation in the U.S. or elsewhere. However, any changes that have the effect of reducing reimbursements for our products or reducing medical procedure volumes could have a material and adverse effect on our business, financial condition and results of operations.
Further, the proliferation of medical device sales agents that are owned, directly or indirectly, by physicians (commonly called physician-owned distributorships, or PODs) could result in increased pricing pressure on our products or harm our ability to sell our products to physicians who own or are affiliated with these sales agents. These physicians derive a proportion of their revenue from selling or arranging for the sale of medical devices for use in procedures they perform on their own patients at hospitals that agree to purchase from or through the POD, or that otherwise furnish ordering physicians with income based, directly or indirectly, on those orders of medical devices. The number of PODs in the spine industry may continue to grow as economic pressures increase throughout the industry and as hospitals, insurers and physicians search for ways to reduce costs and, in the case of the physicians, search for ways to increase their incomes. PODs and the physicians who own, or partially own, them have significant market knowledge and access to the surgeons who use our products and the hospitals that purchase our products. Growth in the number of PODs may reduce our ability to compete effectively for business from physicians who own, or partially own, them, which could have a material and adverse effect on our business, results of operations and financial condition.
In addition, the largest device companies with multiple product franchises have increased their effort to leverage and contract broadly with customers across franchises by providing volume discounts and multi-year arrangements that could prevent our access to these customers or make it difficult (or impossible) to compete on price.
Risks Related to our Financial Results and Need for Financing
We expect to incur losses for the foreseeable future and cannot assure you that we will be able to generate sufficient sales to achieve or sustain profitability.
We expect to incur losses for the foreseeable future as we dedicate significant resources to our marketing and product development strategy, including as we continue to: (i) develop new and next generation products and product line extensions (all of which we call “new products”); (ii) develop new medical techniques designed to enhance the utility of our products; (iii) collect clinical data and conduct clinical studies to differentiate our products from those of our competitors and to demonstrate the value of our products to current and prospective customers and payors; (iv) add independent sales agents and stocking distributors to increase our geographic sales coverage and penetration; (v) increase product inventory to raise the likelihood of success of new product launches; and (vi) invest in our Irvine manufacturing facility; (vii) expand our marketing campaigns and surgeon education and training programs. We cannot assure you that we will ever generate sufficient revenues from our operations to achieve profitability and, even if we achieve profitability, we cannot assure you that we will remain profitable. Our failure to achieve or maintain profitability could negatively affect the value of our securities and our ability to attract and retain personnel, raise capital, execute our business strategy or continue operations.
Our sales volumes and our operating results may fluctuate.
Our sales volumes and our operating results, including components of operating results, such as gross margin and cost of
goods sold, have fluctuated in the past and may fluctuate from time to time in the future, including over the course of a fiscal year, and such fluctuations could affect our stock price. Some factors that may cause these fluctuations include:
•economic conditions worldwide, including arising from or relating to the effects of the COVID-19 pandemic, which could affect the ability of hospitals and other customers to purchase our products and could result in a reduction in elective and non-reimbursed operative procedures;
•market acceptance of our existing products, as well as products in development, and the demand for, and pricing of, our products and the products of our competitors;
•costs, benefits and timing of new product introductions;
•the timing of or failure to obtain regulatory clearances or approvals for new products;
•lost sales and other expenses resulting from stoppages in our or third parties’ production, including as a result of product recalls or field corrective actions;
•the availability and cost of components and materials, including raw materials such as human tissue;
•accurate predictions of product demand and production capabilities sufficient to meet that demand;
•our ability to realize expected yield improvements and scrap reduction initiatives that we have undertaken at our Irvine facility;
•higher than anticipated independent sales agent commissions;
•our ability to purchase or manufacture and ship our products efficiently and in sufficient quantities to meet sales demands;
•the timing of our research and development expenditures;
•expenditures for major initiatives;
•reimbursement, changes in reimbursement or denials in coverage for our products by third-party payors, such as Medicare, Medicaid, private and public health insurers and foreign governmental health systems;
•the ability of our independent sales agents and stocking distributors to achieve expected sales targets and for new agents and stocking distributors to become familiar with our products in a timely manner;
•peer-reviewed publications discussing the clinical effectiveness of our products;
•inspections of our manufacturing facilities for compliance with the FDA's Quality System Regulations (Good Manufacturing Practices), which could result in Form 483 observations, warning letters, injunctions or other adverse findings from the FDA or equivalent foreign regulatory bodies, and corrective actions, procedural changes and other actions, including product recalls, that we determine are necessary or appropriate to address the results of those inspections, any of which may affect production and our ability to supply our customers with our products;
•the costs to comply with new regulations from the FDA or equivalent foreign regulatory bodies, such as the requirements to establish a unique device identification system to adequately identify medical devices through their distribution and use;
•the increased regulatory scrutiny of certain of our products, including products we manufacture for others, which could result in their being removed from the market;
•fluctuations in foreign currency exchange rates; and
•the impact of acquisitions, including the impact of goodwill and intangible asset impairment charges, if future operating results of the acquired businesses are significantly less than the results anticipated at the time of the acquisitions.
In addition, we may experience meaningful variability in our sales and gross profit among quarters, as well as within each quarter, as a result of several factors, including but not limited to (and in addition to those listed above):
•the number of products sold in the quarter;
•the unpredictability of sales of full sets of spinal implants and instruments to our international stocking distributors; and
•the number of selling days in the quarter.
We must maintain high levels of inventory, which could consume a significant amount of our resources and reduce our cash flows.
Because we maintain substantial inventory levels to meet the needs of our customers, we are subject to the risk of inventory excess, obsolescence and shelf-life expiration. Many of our spinal implant products come in sets. Each set includes a significant number of components in various sizes so that the surgeon may select the appropriate spinal implant based on the patient’s needs. In a typical surgery, not all of the implants in the set are used, and therefore certain sizes of implants placed in the set or that we purchase for replenishment inventory may become obsolete before they can be used. In addition, to market our products effectively, we often must provide hospitals and independent sales agents with consigned sets that typically consist of spinal implants and instruments, including products to ensure redundancy and products of different sizes. Further, our orthobiologics products have expiration dates, which range from one to five years, and these products may expire before they can be used. If a substantial portion of our inventory is deemed excess, becomes obsolete or expires, it could have a material adverse effect on our earnings and cash flows due to the resulting costs associated with the inventory impairment charges and costs required to replace such inventory. Further, as we increasingly launch new products and product systems, we may cannibalize older products and product systems, which could exacerbate excess and obsolete charges.
Our future financial results could be adversely affected by impairments or other charges.
We assess periodically impairment of our long-lived assets, including finite-lived intangible assets, whenever events or changes in circumstances indicate that the carrying value may not be recoverable. As of December 31, 2020, we had $13.9 million of net finite-lived intangible assets, consisting of technology and customer relationships. In addition, we continually assess the profitability of our product lines and, after such assessment, may discontinue certain products or product lines in the future. As a result, we may record impairment charges or accelerate amortization on certain technology-related intangible assets in the future. Impairment charges as a result of any of the foregoing could be significant and could have a material and adverse effect on our reported financial results for the period in which the charge is taken, which could have a material and adverse effect on the market price of our common stock.
Continuing economic instability, including challenges faced by European countries, may adversely affect the ability of hospitals and other customers to access funds or otherwise have available liquidity, which could reduce orders for our products or impede our ability to obtain new customers, particularly in European markets.
Continuing economic instability, including challenges faced by European countries and challenges arising from the COVID-19 pandemic, may adversely affect the ability of hospitals and other customers to access funds to enable them to fund their operating budgets. As a result, hospitals and other customers may reduce budgets or put all or part of their budgets on hold or close their operations, which could have a negative effect on our sales and could impede our ability to obtain new customers, particularly in European markets. Governmental austerity policies in Europe and other markets have reduced and could continue to reduce the amount of money available to purchase medical products, including our products. If such conditions persist, they could have a material and adverse effect on our business, financial condition and results of operations.
Our future capital needs are uncertain and we may need to raise additional funds in the future, and such funds may not be available on acceptable terms or at all.
We believe that our cash and cash equivalents and the amount currently available to us under our amended and restated credit agreement with Wells Fargo, N.A. will be sufficient to meet our projected operating requirements over the next 12 months. That said, continued expansion of our business will be expensive, and we likely will seek additional capital. Our capital requirements will depend on many factors, including, but not limited to:
•the revenue generated by sales of our products;
•the costs associated with expanding our sales and marketing efforts;
•the expenses we incur in procuring, manufacturing and selling our products;
•the scope, rate of progress and cost of our clinical studies;
•the cost of obtaining and maintaining regulatory approval or clearance of our products and products in development;
•the costs associated with complying with state, federal and international laws and regulations, including increased costs associated with the United Kingdom's exit from the European Union and the European Union's new Medical Device Regulations;
•the cost of filing and prosecuting patent applications and defending and enforcing our patent and other intellectual property rights;
•the cost of defending, in litigation or otherwise, any claims that we infringe third-party patent or other
intellectual property rights;
•the cost of enforcing or defending against non-competition claims;
•the number and timing of acquisitions and other strategic transactions;
•the costs associated with increased capital expenditures, including fixed asset purchases of instrument sets which we consign to hospitals and independent sales agents to support surgeries; and
•anticipated and unanticipated general and administrative expenses, including insurance expenses.
We may seek to raise additional capital to:
•maintain, and, where necessary, increase appropriate product inventory and spinal instruments levels;
•fund our operations and clinical studies;
•continue, and, where appropriate, increase our research and development activities;
•file, prosecute and defend our intellectual property rights, and defend, in litigation or otherwise, any claims that we infringe third-party patents or other intellectual property rights;
•address the FDA or other governmental, legal or enforcement actions and remediate underlying problems and address investigations or inquiries into sales and marketing practices from governmental agencies worldwide;
•commercialize our new products, if any such products receive regulatory clearance or approval for sale; and
•acquire companies' new products, technology or intellectual property.
Such capital, which we may seek to raise through public or private equity offerings, issuing debt or existing, expanded or new credit facilities, or other sources, may not be available to us on favorable terms, or at all. For example, LIBOR is one of the reference rates under our credit agreement and is the subject of recent proposals for reform that could impact the interest rate we pay under the credit agreement. To the extent we have outstanding borrowings under the credit agreement at the time a LIBOR alternative becomes applicable, our borrowing costs under the credit agreement may increase. In addition, our credit agreement prohibits us from incurring indebtedness without the lender’s consent. If we issue equity securities to raise additional capital, our existing stockholders may experience dilution, and the new equity securities may have rights, preferences and privileges senior to those of our existing stockholders. See “Risks Related to Owning Our Common Stock-Your percentage of ownership in us may be diluted in the future and issuances of substantial amounts of our common stock, or the perception that such issuances may occur, could cause the market price of our common stock to decline significantly, even if our business is performing well.,” and “Risks Related to Owning Our Common Stock-We may issue preferred stock with terms that could dilute the voting power or reduce the value of our common stock,” below. If we raise additional capital through collaboration, licensing or other similar arrangements, it may be necessary to relinquish valuable rights to our products, potential products or proprietary technologies, or grant licenses on terms that are not favorable to us. If we cannot raise capital on acceptable terms, we may not be able to develop or enhance our products, execute our business plan, take advantage of future opportunities or respond to competitive pressures, changes in our supplier relationships or unanticipated customer requirements. Any of these events could adversely affect our ability to achieve our business and financial goals or to achieve or maintain profitability, and could have a material and adverse effect on our business, results of operations and financial condition.
Our PPP loan may not be forgiven and may subject us to challenges and investigations regarding qualification for the loan.
In April 2020, due to the economic uncertainty resulting from the impact of the COVID-19 pandemic on our operations and to support our ongoing operations and retain all employees, we applied for, and received, a loan under the Paycheck Protection Program (PPP) of the Coronavirus Aid, Relief, and Economic Security Act (CARES Act) administered by the U.S. Small Business Administration (SBA). The original principal amount of the loan was $7.2 million; we subsequently repaid $1.0 million. Under the terms of the PPP, subject to specified limitations, the loan may be forgiven if the proceeds are used in accordance with the CARES Act, including for qualifying expenses, which include payroll costs, rent, and utility costs, over the allowable measurement period following receipt of the loan proceeds. In October 2020, we applied for forgiveness of the entire loan. No assurance is provided that we will obtain forgiveness of the loan in whole or in part. Any unforgiven portion of the loan is payable over five years at an interest rate of 1%, with a deferral of payments until the date the lender receives the applicable forgiven amount from the SBA.
The PPP loan application required us to certify that the current economic uncertainty made the loan request necessary to support our ongoing operations. We made this certification in good faith after carefully considering the facts and circumstances, and although we believe we satisfied all eligibility criteria for the PPP loan and our receipt of the PPP loan is consistent with
the objectives of the PPP, the certification described above does not contain objective criteria and is subject to interpretation. Further, following the date we applied for the PPP Loan, the SBA issued updated guidance regarding the PPP, including regarding required borrower certifications and requirements for loan forgiveness. The SBA stated that it is unlikely that a public company with substantial market value and access to capital markets will be able to make the required certification in good faith, and that all PPP loans in excess of $2 million will be subject to review by the SBA for compliance with program requirements. The lack of clarity regarding loan eligibility under the PPP resulted in significant media coverage and controversy regarding public companies applying for and receiving PPP loans. When we applied for forgiveness of the loan we were required to make certain certifications that will be subject to audit and review by governmental entities and could subject us to significant penalties and liabilities if found to be inaccurate. In addition, if despite our good faith belief that we satisfied all eligibility requirements for the PPP loan, we are found to have been ineligible to receive it or in violation of any of the laws or regulations that apply to us in connection with the PPP loan, including the False Claims Act, we may be subject to penalties, including significant civil, criminal and administrative penalties, and could have to repay the PPP loan upon demand. If we are audited or reviewed by the U.S. Department of the Treasury or the SBA, such audit or review could result in the diversion of management's time and attention, generate negative publicity and cause us to incur legal and reputational costs. In addition, our receipt of the PPP loan may result in adverse publicity and damage to our reputation. Any of these events could harm our business, results of operations and financial condition.
Risks Related to our International Operations
We are exposed to a variety of risks relating to our international sales and operations.
During the year ended December 31, 2020, approximately 10% of our net revenue was attributable to our international sales and operations. We are seeking to increase our international sales over the foreseeable future. Our international business operations are subject to a variety of risks, including:
•difficulties in staffing and managing foreign and geographically dispersed operations;
•having to comply with various U.S. and international laws, including the U.S. Foreign Corrupt Practices Act of 1977 and anti-money laundering laws (see also, “Our international operations subject us to laws regarding sanctioned countries, entities and persons, customs and import-export practices, laws regarding transactions in foreign countries, the Foreign Corrupt Practices Act of 1977 and local anti-bribery and other laws regarding interactions with healthcare professionals, and product registration requirements” below);
•having to comply with export control laws, including, but not limited to, the Export Administration Regulations and trade sanctions against embargoed countries, which are administered by the Office of Foreign Assets Control within the Department of the Treasury, as well as the laws and regulations administered by the Department of Commerce;
•complex data privacy requirements, including, but not limited to, the EU General Data Protection Regulation;
•differing regulatory requirements for obtaining clearances or approvals to market our products;
•changes in, or uncertainties relating to, foreign rules and regulations that may impact our ability to sell our products, perform services or repatriate profits to the United States;
•tariffs, trade barriers and export regulations that adversely impact, and other regulatory and contractual limitations on, our ability to sell our products in certain foreign markets, the scope and consequences of which are subject to changing agendas of political, business and environmental groups;
•fluctuations in foreign currency exchange rates;
•limitations on or increase of withholding and other taxes on remittances and other payments by foreign subsidiaries or joint ventures;
•differing multiple payer reimbursement regimes, government payers or patient self-pay systems;
•differing labor laws and standards;
•economic, political or social instability in foreign countries and regions;
•an inability, or reduced ability, to protect our intellectual property, including any effect of compulsory licensing imposed by government action; and
•availability of government subsidies or other incentives that benefit competitors in their local markets that are not available to us.
Any reduction in international sales, or our failure to further develop our international markets, could have a material adverse effect on our business, results of operations and financial condition.
Our international operations subject us to laws regarding sanctioned countries, entities and persons, customs and import-export practices, laws regarding transactions in foreign countries, the Foreign Corrupt Practices Act of 1977 and local anti-bribery and other laws regarding interactions with healthcare professionals, and product registration requirements.
Foreign governmental regulations have become increasingly stringent and more common, and we may become subject to even more rigorous regulation by foreign governmental authorities. Numerous laws restrict, and in some cases prohibit, U.S. companies from directly or indirectly selling goods, technology or services to people or entities in certain countries. In addition, these laws require that we exercise care in structuring our sales and marketing practices and effecting product registrations in foreign countries. Compliance with these regulations is costly.
The U.S. Foreign Corrupt Practices Act of 1977, or FCPA, and similar anti-bribery laws in non-U.S. jurisdictions generally prohibit companies and their intermediaries from making improper payments for the purpose of obtaining or retaining business. The FCPA also imposes accounting standards and requirements on publicly traded U.S. corporations and their foreign affiliates, which are intended to prevent the diversion of corporate funds to the payment of bribes and other improper payments. Because of the predominance of government-sponsored healthcare systems around the world, many of our customer relationships outside of the United States are with governmental entities and are therefore subject to such anti-bribery laws. Our internal control policies and procedures may not always protect us from reckless or criminal acts committed by our employee shareowners, or agents. In recent years, both the United States and foreign government regulators have increased regulation, enforcement, inspections and governmental investigations of the medical device industry, including increased United States government oversight and enforcement of the FCPA. Despite implementation of a comprehensive global healthcare compliance program, we may be subject to more regulation, enforcement, inspections and investigations by governmental authorities in the future.
Any failure to comply with applicable foreign legal and regulatory obligations could adversely affect us in a variety of ways, that include, but are not limited to: the suspension or withdrawal of our CE Certificates of Conformity; the imposition of significant criminal, civil and administrative fines and penalties, including revocation or suspension of a business license and imprisonment of individuals; denial of export privileges; seizure of shipments and restrictions on certain business activities; disgorgement and other remedial measures; disruptions of our operations; and significant management distraction.
Our results may be impacted by changes in foreign currency exchange rates.
As a result of our international sales and operations, we generate revenues in various foreign currencies including euros, British pounds, and Swiss francs, and in U.S. dollar-denominated transactions conducted with customers who generate revenue in currencies other than the U.S. dollar. We also incur operating expenses in euros. We cannot predict accurately the consolidated effects of exchange rate fluctuations upon our future operating results because of the variability of currency exposure in our revenues and operating expenses and the potential volatility of currency exchange rates, which is subject to increased volatility in light of the COVID-19 pandemic. Although we address currency risk management through regular operating and financing activities, those actions may not prove to be fully effective. In addition, for those foreign customers who purchase our products in U.S. dollars, currency exchange rate fluctuations between the U.S. dollar and the currencies in which those customers do business may have a negative effect on the demand for our products in foreign countries where the U.S. dollar has increased in value compared to the local currency. Converting our earnings from international operations to U.S. dollars for use in the U.S. can also raise challenges, including problems moving funds out of the countries in which the funds were earned and difficulties in collecting accounts receivable in foreign countries where the usual accounts receivable payment cycle is longer. To date, we have not used risk management techniques to hedge the risks associated with foreign currency exchange rate fluctuations. Even if we implemented hedging strategies, not every exposure can be hedged and, where hedges are put in place based on expected foreign currency exchange exposure, they are based on forecasts that may vary or that may later prove to have been inaccurate. As a result, fluctuations in foreign currency exchange rates or our failure to successfully hedge against these fluctuations could have a material adverse effect on our operating results and financial condition.
Risks Related to Privacy and Security
We depend on information technology and if our information technology fails to operate adequately or fails to properly maintain the integrity of our data, our business could be materially and adversely affected.
We depend significantly on sophisticated information technology, or IT, for our infrastructure and to support business decisions. Our IT needs require an ongoing commitment of significant resources to maintain, protect and enhance existing systems and to develop new systems to keep pace with new technology, evolving regulatory standards, the increasing need to protect patient and customer information and changing customer patterns. We do not have a comprehensive IT disaster recovery plan. Any significant breakdown, intrusion, interruption, corruption or destruction of any component of our IT systems could have a material and adverse effect on our business, financial condition and results of operations.
Security breaches, loss of data and other disruptions could compromise sensitive information related to our business, prevent us from accessing critical information or expose us to liability, which could adversely affect our business and our reputation.
In the ordinary course of our business, we collect and store sensitive data, including legally protected patient health information, credit card information, personally identifiable information about our employees, intellectual property, and proprietary business information. We manage and maintain our applications and data utilizing on-site systems. These applications and data encompass a wide variety of business critical information including research and development information, commercial information and business and financial information.
Although our computer and information systems are protected through physical and software safeguards, they are still vulnerable to system malfunction, computer viruses, cyber-attacks, breaches or interruptions due to employee error or malfeasance, terrorist attacks, earthquakes, fire, flood (and other natural disasters), power loss, computer systems failure, data network failure, Internet failure, or lapses in compliance with privacy and security mandates. If any of our systems were to become subject to any of the foregoing, our networks could be compromised, and the information stored there could be accessed by unauthorized parties, publicly disclosed, lost or stolen. These events could lead to the unauthorized access and result in the misappropriation or unauthorized disclosure of confidential information belonging to us or to our employees, partners, customers or suppliers. We have measures in place designed to detect and respond to security incidents and breaches of privacy and security mandates. The techniques used by criminal elements to attack computer systems are sophisticated, change frequently and may originate from less regulated and remote areas of the world. As a result, we may not be able to address these techniques proactively or implement adequate preventative measures.
In response to the COVID-19 pandemic, we have modified our business practices and implemented telework policies wherever possible for appropriate categories of "nonessential" employees to minimize the disruption to our operations, to the extent possible. The continuation of these telework policies for "nonessential employees" also introduces additional operational risk, including increased cybersecurity risk. These cyber risks may include, among other risks, greater phishing, malware, and other cyber-attacks, vulnerability to or disruptions of our information technology infrastructure and systems to support remote operations, increased risk of unauthorized access, use or dissemination of confidential information, limited ability to restore the systems in the event of a systems failure or interruption, greater risk of a security breach resulting in destruction, alteration or misuse of valuable information, including proprietary business information and personally identifiable information of individuals, all of which could expose us to risks of data or financial loss, litigation and liability.
The regulatory environment governing information, security and privacy laws is increasingly demanding and continues to evolve. A number of states have adopted laws and regulations that may affect our privacy and data security practices regarding the use, disclosure and protection of personally identifiable information. For example, the EU’s General Data Protection Regulation (GDPR), which applies to any company established in the EU as well as any company outside the EU that processes personal data in connection with the offering of goods or services to individuals in the EU, imposes strict obligations on the processing of personal data, including personal health data, and the free movement of such data. The GDPR imposes substantial fines for breaches of data protection requirements, which can be up to four percent of global revenue or 20 million euros, whichever is greater, and it also confers a private right of action on data subjects for breaches of data protection requirements. We are also subject to the California Consumer Privacy Act (the CCPA), which went into effect on January 1, 2020. On November 3, 2020, California passed the California Privacy Rights Act (the CPRA), which builds on the CCPA and expands consumer privacy rights to more closely align with the EU’s GDPR. The CPRA will go into effect on January 1, 2023 and will apply to information collected on or after January 1, 2022. The CCPA and CPRA, among other things, create new data privacy obligations for covered companies and provides new privacy rights to California residents, including the right to opt out of certain disclosures of their information. The CCPA also created a private right of action with statutory damages for certain data breaches, thereby potentially increasing risks associated with a data breach. It remains unclear what, if any, additional modifications will be made to the CPRA by the California legislature or how it will be interpreted. Therefore the effects of the CCPA and CPRA are significant and will likely require us to modify our data processing practices, and may cause us to incur substantial costs and expenses to comply.
If our IT systems are compromised, due to a data breach or otherwise, we could be subject to legal claims or proceedings, liability under laws that protect the privacy of personal information (such as the CCPA, GDPR and CPRA) government enforcement actions and regulatory penalties, fines, damages, and enforcement actions, and we could lose trade secrets or other confidential information, the occurrence of any of which could have a material and adverse effect on our business, financial condition and results of operations. Unauthorized access, loss or dissemination could also interrupt our operations, including our ability to bill our customers, provide customer support services, conduct research and development activities, process and prepare company financial information, manage various general and administrative aspects of our business, and could damage our reputation, any of which could adversely affect our business.
Risks Related to Non-Compliance with Laws and Regulations
We are subject to stringent domestic and foreign medical device regulation and any adverse regulatory action may materially and adversely affect our financial condition and business operations.
Our products, development activities and manufacturing processes are subject to extensive and rigorous regulation by numerous federal and state government agencies, including the FDA and comparable foreign agencies. To varying degrees, each agency monitors and enforces our compliance with laws and regulations governing the development, testing, manufacturing, labeling, marketing and distribution of our products. For example, we must comply with the FDA’s Quality System Regulation, which mandates that manufacturers of medical devices adhere to certain quality assurance standards pertaining to, among other things, validation of manufacturing processes, controls for purchasing product components and documentation practices.
In addition, we must engage in extensive recordkeeping and reporting. For example, the Federal Medical Device Reporting regulation requires us to provide information to the FDA whenever there is evidence that reasonably suggests that a device may have caused or contributed to a death or serious injury or that a malfunction occurred that would be likely to cause or contribute to a death or serious injury upon recurrence.
Compliance with applicable regulatory requirements is subject to continual review and we must make our manufacturing facilities and records available for periodic unscheduled inspections by governmental agencies, including the FDA, state authorities and comparable agencies in other countries. If we fail to pass an FDA Quality System Regulation inspection or to comply with applicable regulatory requirements, we may receive a notice of a violation in the form of inspectional observations on Form FDA 483, a warning letter, or could otherwise be required to take corrective action and, in severe cases, we could suffer a disruption of our operations and manufacturing delays. If we fail to take adequate corrective actions, we could be subject to enforcement actions, including significant fines, suspension of approvals, seizures or recalls of products, operating restrictions and criminal prosecutions.
The FDA has increased its scrutiny of the medical device industry in recent years and the government is expected to continue to scrutinize the industry closely. Moreover, allegations may be made against us or against our suppliers, including donor recovery groups or tissue banks, claiming that the acquisition or processing of biomaterials products does not comply with applicable FDA regulations or other relevant statutes and regulations. Allegations like these could cause regulators or other authorities to investigate or take other action against us or our suppliers, or could cause negative publicity for us or our industry generally. If the FDA were to investigate us, because of an allegation or otherwise, and if the FDA were to conclude that we are not in compliance with applicable laws or regulations, or that any of our medical devices are ineffective or pose an unreasonable health risk, the FDA could ban such medical devices, detain or seize such medical devices, order a recall, repair, replacement or refund of such devices, require us to notify health professionals and others that the devices present unreasonable risks of substantial harm to the public health, restrict manufacturing and impose other operating restrictions, enjoin and restrain certain violations of applicable law pertaining to medical devices and assess civil or criminal penalties against our officers, employees or us. The FDA may also recommend prosecution to the U.S. Department of Justice. Any notice or communication from the FDA regarding a failure to comply with applicable requirements, or negative publicity or product liability claims resulting from any adverse regulatory action, could materially and adversely affect our product sales and overall business.
The European Union adopted the MDR in 2017, which will replace the existing medical device directives in May 2021. Devices with valid CE certificates issued under the directive before May 2021 may remain on the market until their certificates expire (but no later than May 2024). The MDR will change many aspects of the existing regulatory framework, imposing stricter pre-market and post-market requirements for medical devices such as ours. Penalties may be severe, including fines and criminal sanctions. Compliance with the new regulations may require us to incur significant costs, and failure to meet the requirements could limit our ability to distribute products in the European Union. In addition, until a completed mutual recognition agreement exists between Switzerland and the EU, Switzerland will be considered a Third Country. This may lead
to additional import/export requirements or unavailability of product in Switzerland if that product is made available in the EU under the MDR.
Further, our suppliers also are subject to a wide array of regulatory and other requirements, including quality control, quality assurance, the maintenance of records and documentation, and unscheduled inspections by governmental agencies, including the FDA, state authorities and comparable agencies in other countries. Our suppliers may be unable to comply with these requirements and with other FDA, state and foreign regulatory requirements. We have little control over their ongoing compliance with these regulations. Their failure to comply may expose us to regulatory action and other liability, including fines and civil penalties, suspension of production, suspension or delay in new product approval or clearance, product seizure or recall, or withdrawal of product approval or clearance.
Certain of our products are derived from human tissue and are or could be subject to additional regulations and requirements.
Some of our orthobiologics products are derived from human bone tissue, and as a result are also subject to FDA and certain state regulations regarding human cells, tissues and cellular or tissue-based products, or HCT/Ps. An HCT/P is a product containing or consisting of human cells or tissue intended for transplantation into a human patient. Examples include bone, ligament, skin and cornea.
Some HCT/Ps also meet the definition of a biological product, medical device or drug regulated under the Federal Food, Drug and Cosmetic Act. Section 361 of the Public Health Service Act authorizes the FDA to issue regulations to prevent the introduction, transmission or spread of communicable disease. HCT/Ps regulated as “361 HCT/Ps” are subject to requirements relating to registering facilities and listing products with the FDA, screening and testing for tissue donor eligibility, Good Tissue Practice when processing, storing, labeling and distributing HCT/Ps, including required labeling information, stringent record keeping and adverse event reporting. These biologic, device or drug HCT/Ps must comply both with the requirements exclusively applicable to 361 HCT/Ps and, in addition, with requirements applicable to biologics, devices or drugs, including premarket clearance or approval. We have received required approvals for our products regulated as 361 HCT/Ps. However, there have been occasions in the past, and there could be occasions in the future, when the FDA requires us to obtain a 510(k) clearance for our products regulated as 361 HCT/Ps. The process of obtaining a 510(k) clearance could take time and consume resources, and failing to receive such a clearance would render us unable to market and sell such products, which could have a material and adverse effect on our business.
The American Association of Tissue Banks has issued operating standards for tissue banking. Accreditation is voluntary, but compliance with these standards is a requirement to become a licensed tissue bank. In addition, some states have their own tissue banking regulations. In addition, procurement of certain human organs and tissue for transplantation is subject to the National Organ Transplant Act, or NOTA, which prohibits the transfer of certain human organs, including skin and related tissue, for valuable consideration, but permits the reasonable payment associated with the removal, transportation, implantation, processing, preservation, quality control and storage of human tissue and skin. We reimburse tissue banks for their expenses associated with the recovery, storage and transportation of donated human tissue they provide to us for processing. We include in our pricing structure amounts paid to tissue banks to reimburse them for their expenses associated with the recovery and transportation of the tissue, in addition to certain costs associated with processing, preservation, quality control and storage of the tissue, marketing and medical education expenses and costs associated with development of tissue processing technologies. NOTA payment allowances may be interpreted to limit the amount of costs and expenses we can recover in our pricing for our products, thereby reducing our future revenue and profitability. If we were to be found to have violated NOTA’s prohibition on the sale or transfer of human tissue for valuable consideration, we would potentially be subject to criminal enforcement sanctions, which could materially and adversely affect our results of operations.
Because of the absence of a harmonized regulatory framework and the proposed regulation for advanced therapy medicinal products in the European Union, or EU, as well as for other countries, the approval process in the EU for human-derived cell or tissue-based medical products could be extensive, lengthy, expensive and unpredictable. Among others, some of our orthobiologics products are subject to EU member states’ regulations that govern the donation, procurement, testing, coding, traceability, processing, preservation, storage and distribution of HCT/Ps. These EU member states’ regulations include requirements for registration, listing, labeling, adverse-event reporting and inspection and enforcement. Some EU member states have their own tissue banking regulations, including new requirements related to COVID-19 and donor screening. Non-compliance with various regulations governing our products in any EU member state could result in the banning of our products in such member state or enforcement actions being brought against us, which could have a material and adverse effect on our business, results of operations and financial condition.
Certain of our products contain materials derived from animal sources and may become subject to additional regulation.
Certain of our products contain material derived from bovine tissue. Products that contain materials derived from animal sources, including food, pharmaceuticals and medical devices, are subject to scrutiny in the media and by regulatory authorities. Regulatory authorities are concerned about the potential for the transmission of disease from animals to humans via those materials. In past years, public scrutiny was particularly acute in Western Europe with respect to products derived from animal sources, largely due to concern that materials infected with the agent that causes bovine spongiform encephalopathy, or BSE, otherwise known as mad cow disease, may, if ingested or implanted, cause a variant of the human Creutzfeldt-Jakob disease, an ultimately fatal disease with no known cure. Cases of BSE in cattle discovered in Canada and the U.S. increased awareness in North America.
We take steps designed to minimize the risk that our products contain agents that can cause disease, such as obtaining our collagen from countries considered BSE-free. Nevertheless, products that contain materials derived from animals, including our products, could become subject to additional regulation, or even be banned in certain countries, because of concern over the potential for the transmission of infectious or other agents. Significant new regulation, or a ban of our products, could have a material and adverse effect on our business or our ability to expand our business.
Certain countries, such as Japan, China, Taiwan and Argentina, have issued regulations that require our collagen products be processed from bovine tendon sourced from countries where no cases of BSE have occurred. The collagen raw material we use in our products is sourced from New Zealand. Our supplier has obtained approval from certain countries, including the U.S., the European Union, Japan, Taiwan, China and Argentina, for the use of such collagen raw material in products sold in those countries. If we cannot continue to obtain collagen raw material from a qualified source of tendon from a country that has never had a case of BSE, we will not be permitted to sell our collagen products in certain countries, which could have a material and adverse effect on our business, results of operations and financial condition.
Oversight of the medical device industry might affect the way we sell medical devices and compete in the marketplace.
The FDA, the U.S. Office of the Inspector General for the U.S. Department of Health and Human Services, the U.S. Department of Justice and other regulatory agencies actively enforce regulations prohibiting the promotion of a medical device for a use that has not been cleared or approved by the FDA. Use of a device outside its cleared or approved indications is known as “off-label” use. Physicians may prescribe our products for off-label uses, as the FDA does not restrict or regulate a physician’s choice of treatment within the practice of medicine. However, if a regulatory agency determines that our promotional materials, training or activities constitute improper promotion of an off-label use, the regulatory agency could request that we modify our promotional materials, training or activities, or subject us to regulatory enforcement actions, including the issuance of a warning letter, injunction, seizure, civil fine and/or criminal penalties. Although our policy is to refrain from statements and activities that could be considered off-label promotion of our products, any regulatory agency could disagree and conclude that we have engaged in off-label promotion and, potentially, caused the submission of false claims. In addition, the off-label use of our products may increase the risk of injury to patients, and, in turn, the risk of product liability claims. See “Other Risks Related to our Business and Financial Condition-We may have significant product liability exposure and our insurance may not cover all potential claims,” below.
There are also multiple other laws and regulations that govern how companies in the healthcare industry may market their products to healthcare professionals and may compete by discounting the prices of their products, including, for example, the federal Anti-Kickback Statute, the federal False Claims Act, the federal Health Insurance Portability and Accountability Act of 1996, state law equivalents to these federal laws that are meant to protect against fraud and abuse, the Foreign Corrupt Practices Act of 1977 and analogous laws in foreign countries. Violations of these laws are punishable by criminal and civil sanctions, including, but not limited to, penalties, fines and exclusion from participation in federal and state healthcare programs, including Medicare and Medicaid, and imprisonment. Federal and state government agencies, as well as private whistleblowers, have significantly increased investigations and enforcement activity under these laws. Although we exercise care in structuring our sales and marketing practices, customer discount arrangements and interactions with healthcare professionals to comply with these laws and regulations, we cannot provide assurance that government officials will not assert that our practices are in compliance or that government regulators or courts will interpret those laws or regulations in a manner consistent with our interpretation. Even if an investigation is unsuccessful or is not fully pursued, we may spend considerable time and resources defending ourselves and the adverse publicity surrounding any assertion that we may have engaged in violative conduct could have a material and adverse effect on our reputation with existing and potential customers and on our business, financial condition and results of operations.
Federal and state laws are also sometimes open to interpretation, and from time to time we may find ourselves at a competitive disadvantage if our interpretation differs from that of our competitors. AdvaMed (U.S.), EucoMed (Europe), MEDEC (Canada) and MTAA (Australia), some of the principal trade associations for the medical device industry, have promulgated model codes of ethics that set forth standards by which its members should (and non-member companies may) abide in the promotion of their products in various regions. We have implemented policies and procedures for compliance consistent with those promulgated by these associations, and we train our sales and marketing personnel on our policies regarding sales and marketing practices. Nevertheless, the sales and marketing practices of our industry have been the subject of increased scrutiny from federal and state government agencies, we believe this trend will continue and that it could affect our ability to retain customers and other relationships important to our business.
For example, prosecutorial scrutiny and governmental oversight, at both the state and federal levels, over some major device companies regarding the retention of healthcare professionals have limited how medical device companies may retain healthcare professionals as consultants. Various hospital organizations, medical societies and trade associations are establishing their own practices that may require detailed disclosures of relationships between healthcare professionals and medical device companies or ban or restrict certain marketing and sales practices, such as gifts and business meals. In addition, the Affordable Care Act, as well as certain state laws, require detailed disclosure of certain financial relationships, gifts and other remuneration made to certain healthcare professionals and teaching hospitals, the publicity surrounding which could have a negative impact on our relationships with our customers and ability to seek input on product design or involvement in research. As a result of laws, rules and regulations or our own or third-party policies that prohibit or restrict interactions, or the growing perception that any interaction between healthcare professionals and industry are tainted, we may be unable to engage with our healthcare professional customers in the same manner or to the same degree, or at all, as would otherwise be the case, which may adversely affect our ability to understand our customer’s needs and to incorporate into our development programs feedback that addresses these needs. If we are unable to develop and commercialize new products that address the needs of our surgeon customers and their patients, our products may not be broadly accepted in the marketplace, or at all, which would have a negative effect on our business, results of operations and financial condition.
We are subject to requirements relating to hazardous materials which may impose significant compliance or other costs on us.
Our research, development and manufacturing processes involve the controlled use of certain hazardous materials. For example, our allograft bone tissue processing may generate waste materials that in the U.S. are classified as medical waste. In addition, we lease facilities at which hazardous materials could have been used. Because of the foregoing, we are subject to federal, state, foreign and local laws and regulations governing the use, manufacture, storage, handling, treatment, remediation and disposal of hazardous materials and certain waste products.
Although we believe that our procedures for handling and disposing of hazardous materials comply with applicable laws as currently in effect, we cannot eliminate the risk of accidental contamination or injury from these materials. In addition, under some environmental laws and regulations, we could also be held responsible for all of the costs relating to any contamination at our past or present facilities and at third-party waste disposal sites, even if such contamination was not caused by us. If an accident occurs, state or federal or other applicable authorities may curtail our use of these materials and interrupt our business operations. In addition, if an accident or environmental discharge occurs, or if we discover contamination caused by prior operations, including by prior owners and operators of properties we acquire, we could be liable for cleanup obligations, damages and fines any related liability could exceed our resources. If such unexpected costs are substantial, this could significantly harm our financial condition and results of operations. We carry no insurance specifically covering environmental claims relating to the use of hazardous materials.
Risks Related to Intellectual Property Protection and Use
Our intellectual property rights may not provide meaningful commercial protection for our products, potentially enabling third parties to use our technology or very similar technology in ways that could reduce our ability to compete in the marketplace.
Our success will depend in part on our ability to, both in the U.S. and in foreign countries, obtain and maintain patent and other exclusivity with respect to our products; prevent third parties from infringing upon our proprietary rights; and maintain proprietary know-how and trade secrets. However, these legal means afford only limited protection and may not adequately protect our rights or permit us to gain or keep any competitive advantage.
We own or have licensed patents that cover aspects of some of our product lines. Our patents, however, may not provide us with any significant competitive advantage. Others may challenge our patents and, as a result, our patents could be narrowed, invalidated or rendered unenforceable. Competitors may develop products similar to ours that our patents do not cover. In addition, our current and future patent applications may not result in the issuance of patents in the U.S. or foreign countries. Further, there is a substantial backlog of patent applications at the U.S. Patent and Trademark Office, and the approval or rejection of patent applications may take several years.
In an effort to protect our trade secrets and intellectual property rights, we require our employees, consultants and advisors to execute confidentiality and invention assignment agreements upon commencement of employment or consulting relationships with us. These agreements provide that, except in specified circumstances, all confidential information developed or made known to the individual during their relationship with us must be kept confidential. We cannot assure you, however, that these agreements will meaningfully protect our trade secrets or other proprietary information in the event of the unauthorized use or disclosure of confidential information. In addition, we cannot assure you that others will not independently develop substantially equivalent proprietary information and procedures or otherwise gain access to our trade secrets, that our trade secrets will not be disclosed or that we can otherwise protect our rights to unpatented trade secrets.
In addition to contractual measures, we try to protect the confidential nature of our proprietary information using physical and technological security measures. Such measures may not, for example, in the case of misappropriation of a trade secret by an employee or third party with authorized access, adequately protect our proprietary information. Our security measures may not prevent an employee or consultant from misappropriating our trade secrets and providing them to a competitor, and recourse we take against such misconduct may not provide an adequate remedy to protect our interests fully. Unauthorized parties may also attempt to copy or reverse engineer certain aspects of our products that we consider proprietary. Enforcing a claim that a party illegally disclosed or misappropriated a trade secret can be difficult, expensive and time-consuming, and the outcome is unpredictable.
In addition, we may face claims by third parties that our agreements with employees, consultants or advisors obligating them to assign intellectual property to us are ineffective or in conflict with prior or competing contractual obligations of assignment, which could result in ownership disputes regarding intellectual property we have developed or will develop and interfere with our ability to capture the commercial value of such intellectual property. Litigation may be necessary to resolve an ownership dispute, and if we are unsuccessful, we may be precluded from using certain intellectual property or may lose our exclusive rights in that intellectual property. Either outcome could harm our business and competitive position. See “If we seek to protect or enforce our intellectual property rights through litigation or other proceedings, it could require us to spend significant time and money, the results of which are uncertain,” below.
Furthermore, the laws of some foreign countries may not protect our intellectual property rights to the same extent as the laws of the U.S., if at all. Since most of our issued patents and pending patent applications are for the U.S. only, we lack a corresponding scope of patent protection in other countries. Thus, we may not be able to stop a competitor from marketing products in other countries that are similar to some of our products.
If we are unable to obtain, protect and enforce patents on our technology and to protect our trade secrets, such inability could have a material and adverse effect on our business, results of operations and financial condition.
Our success will depend partly on our ability to operate without infringing or misappropriating the proprietary rights of others.
Our success will depend in part on our ability, both in the U.S. and in foreign countries, to operate without infringing upon the patents and proprietary rights of others, and to obtain appropriate licenses to patents or proprietary rights held by third parties if infringement would otherwise occur.
Significant litigation regarding patent rights occurs in our industry. Our competitors in both the U.S. and abroad, many of which have substantially greater resources and have made substantial investments in patent portfolios and competing technologies, may have applied for or obtained or may in the future apply for and obtain, patents that will prevent, limit or otherwise interfere with our ability to make, use and sell our products. Generally, we do not conduct independent reviews of patents issued to third parties. In addition, patent applications in the U.S. and elsewhere can be pending for many years before issuance, so there may be applications of others now pending of which we are unaware that may later result in issued patents that will prevent, limit or otherwise interfere with our ability to make, use or sell our products. The large number of patents, the rapid rate of new patent applications and issuances, the complexities of the technology involved, and the uncertainty of
litigation increase the risk of assets and resources including management’s attention, being diverted to patent litigation. We have received, and expect to receive, communications from various industry participants alleging our infringement of their patents, trade secrets or other intellectual property rights and/or offering licenses to such intellectual property. Any lawsuits resulting from such allegations could subject us to significant liability for damages and invalidate our proprietary rights. Any potential intellectual property litigation also could force us to do one or more of the following:
•stop making, selling or using products or technologies that allegedly infringe the asserted intellectual property;
•lose the opportunity to license our technology to others or to collect royalty payments based upon successful protection and assertion of our intellectual property rights against others;
•incur significant legal expenses;
•pay substantial damages or royalties to the party whose intellectual property rights we may be found to be infringing;
•pay the attorney fees and costs of litigation to the party whose intellectual property rights we may be found to be infringing;
•redesign those products that contain the allegedly infringing intellectual property, which could be costly, disruptive and/or infeasible; or
•attempt to obtain a license to the relevant intellectual property from third parties, which may not be available on reasonable terms or at all.
See “If we seek to protect or enforce our intellectual property rights through litigation or other proceedings, it could require us to spend significant time and money, the results of which are uncertain,” below.
Further, as the number of participants in the spine industry grows, the possibility of intellectual property infringement claims against us increases. If we are found to infringe the intellectual property rights of third parties, we could have to pay substantial damages (which may be increased up to three times of awarded damages) and/or substantial royalties and could be prevented from selling our products unless we obtain a license or are able to redesign our products to avoid infringement. Any such license may not be available on reasonable terms, if at all, and there can be no assurance that we would be able to redesign our products in a way that would not infringe the intellectual property rights of others. If we fail to obtain any required licenses or make any necessary changes to our products or technologies, we may have to withdraw existing products from the market or may be unable to commercialize one or more of our products, all of which could have a material adverse effect on our business, results of operations and financial condition.
In addition, we generally indemnify our customers and sales agents with respect to infringement by our products of the proprietary rights of third parties. Third parties may assert infringement claims against our customers or sales agents. These claims may require us to initiate or defend protracted and costly litigation on behalf of our customers or sales agents, regardless of the merits of these claims. If any of these claims succeed, we may be forced to indemnify, or pay damages on behalf of, our customers or sales agents or may have to obtain licenses for the products they use. If we cannot obtain all necessary licenses on commercially reasonable terms, our customers may be forced to stop using our products.
If we seek to protect or enforce our intellectual property rights through litigation or other proceedings, it could require us to spend significant time and money, the results of which are uncertain.
To protect or enforce our intellectual property rights, we may have to initiate or defend litigation against or by third parties, such as infringement suits, opposition proceedings or seeking a court declaration that we do not infringe the proprietary rights of others or that their rights are invalid or unenforceable. Litigation, including defending against claims without merit is expensive and time-consuming, and could divert management attention and resources away from our business and could harm our reputation. We may not have sufficient resources to enforce our intellectual property rights or to defend our intellectual property rights against a challenge. Even if we prevail, the cost of litigation, including the diversion of management and other resources, could affect our profitability and could place a significant strain on our financial resources.
Our ability to enforce our intellectual property rights depends on our ability to detect infringement. It may be difficult to detect infringers who do not advertise the components used in their products. Moreover, it may be difficult or impossible to obtain evidence of infringement in a competitor’s or potential competitor’s product. The medical device industry is characterized by the existence of a large number of patents and frequent litigation based on allegations of patent infringement. It is not unusual for parties to exchange letters surrounding allegations of intellectual property infringement and licensing arrangements. In addition, the patent positions of medical device companies, including our patent position, may involve
complex legal and factual questions, and, therefore, the scope, validity and enforceability of any patent claims we have or may obtain cannot be predicted with certainty.
Risks Related to Our Public Company Status and Growth Through Acquisition
We expend substantial resources to comply with laws and regulations relating to public companies, and any failure to maintain compliance could subject us to regulatory scrutiny and cause investors to lose confidence in our company, which could harm our business and have a material adverse effect on our stock price.
Laws and regulations affecting public companies, including provisions of the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010 and the Sarbanes-Oxley Act of 2002 (SOX), and the related rules and regulations adopted by the U.S. Securities and Exchange Commission (SEC), and by the Nasdaq Stock Market increase our accounting, legal and financial compliance costs and make some activities more time-consuming and costly. We cannot predict or estimate with any reasonable accuracy the total amount or timing of the costs we may incur to comply with these laws and regulations. In addition, we expect that our management and other personnel will need to divert attention from operational and other business matters to devote substantial time to these matters. For example, compliance with Section 404 of SOX, including performing the system and process documentation and evaluation necessary to issue our annual report on the effectiveness of our internal control over financial reporting and obtaining the required attestation report from our independent registered public accounting firm, requires us to incur substantial expense and expend significant management time. Further, we have in the past discovered, and in the future may discover, areas of internal controls that need improvement. If we identify deficiencies in our internal controls deemed to be material weaknesses, we could become subject to scrutiny by regulatory authorities and we could lose investor confidence in the accuracy and completeness of our SEC filings, including the financial statements included therein, which could have a material adverse effect on our stock price. Internal control over financial reporting cannot provide absolute assurance of achieving financial reporting objectives because of its inherent limitations, including the possibility of human error and circumvention by collusion or overriding of controls. Accordingly, even an effective internal control system may not prevent or detect material misstatements on a timely basis, or at all. Also, previously effective controls may become inadequate over time because of changes in our business or operating structure, and we may fail to take measures to evaluate the adequacy of and update these controls, as necessary, which could lead to a material misstatement.
In addition, new laws and regulations could make it costlier or more difficult for us to obtain certain types of insurance, including director and officer liability insurance, and we may be forced to accept reduced policy limits and coverage or incur substantially higher costs to obtain the coverage that is the same or similar to our current coverage. The impact of these events could also make it more difficult for us to attract and retain qualified persons to serve as our executive officers or on our board of directors or on its committees.
Regulations related to “conflict minerals” may force us to incur additional expenses, may make our supply chain more complex and may result in damage to our reputation with customers.
We are subject to SEC regulations that require us to determine whether our products contain certain specified minerals, referred to under the regulations as “conflict minerals,” and, if so, to perform an extensive inquiry into our supply chain, to determine whether such conflict minerals originate from the Democratic Republic of Congo or an adjoining country. We have determined that certain of our products contain such specified minerals. We are continuing to conduct inquiries into our supply chain in connection with the preparation of our conflict minerals report for 2020. Compliance with these regulations has increased our costs and has been time-consuming for our management and our supply chain personnel (and time-consuming for our suppliers), and we expect that continued compliance will continue to require significant money and time. In addition, to the extent any of our disclosures are perceived by the market to be “negative,” it may cause customers to refuse to purchase our products. Further, if we determine to make any changes to products, processes, or sources of supply, it may result in additional costs, which may adversely affect our business, financial condition and results of operations.
Our growth strategy could involve growth through acquisitions, which would require us to incur substantial costs and potential liabilities for which we may never realize the anticipated benefits.
We may grow our business through acquisitions, a strategy which ultimately could prove unsuccessful. Any new acquisition could result in material transaction expenses, increased interest and amortization expense, increased depreciation expense, increased operating expense and possible in-process research and development charges for acquisitions that do not meet the definition of a “business,” any of which could have a material and adverse effect on our operating results.
In addition, businesses we acquire may not have adequate financial, disclosure, regulatory, quality or other compliance controls in place when we acquire them, which may create uncertainty regarding the actual condition and financial results of the acquired business and our assumptions regarding synergies and future results. Following any acquisition, we must integrate the new business, which includes incorporating it into our financial, compliance, regulatory and quality systems. Failure to timely and successfully integrate acquired businesses may result in non-compliance with regulatory or other requirements and may result in unexpected costs, including as a result of inadequate cost containment and unrealized economies of scale. In addition, acquisitions divert management and other resources, and involve other risks, including, risks associated with entering markets in which our marketing and sales personnel may have limited experience and with disruption to existing relationships with employees, suppliers, customers and sales agents, both with respect to us and the acquired company. As a result of any of the foregoing, we may not realize the expected benefit from any acquisition. If we cannot integrate acquired businesses, products or technologies, our business, financial conditions and results of operations could be materially and adversely affected.
Furthermore, as a result of acquisitions of other healthcare businesses, we may be subject to the risk of unanticipated business uncertainties, regulatory and other compliance matters or legal liabilities relating to those acquired businesses for which the sellers of the acquired businesses may not indemnify us, for which we may not be able to obtain insurance (or adequate insurance) or for which the indemnification may not be sufficient to cover the ultimate liabilities.
Risks Related to Owning our Common Stock
The market price of our common stock has been and likely will continue to be volatile.
The market price of our common stock is likely to be volatile and could be subject to wide fluctuations in response to various factors, some of which are beyond our control. In addition to the factors discussed in this “Risk Factors” section and elsewhere in this Form 10-K, these factors include:
•actual or anticipated fluctuations in our quarterly financial condition and operating performance;
•introduction of new products by us or our competitors;
•announcements by us or our competitors of significant acquisitions or dispositions;
•our ability to obtain financing as needed;
•a shift in our investor base, including sales of our shares by existing stockholders;
•any major change in our board of directors or management;
•threatened or actual litigation or governmental investigations;
•the number of shares of our common stock publicly owned and available for trading;
•the operating and stock price performance of similar companies;
•changes in earnings estimates by securities analysts or our ability to meet earnings guidance;
•publication of research reports about us or our industry or changes in recommendations or withdrawal of research coverage by securities analysts;
•changes in laws or regulations affecting our business, including tax legislation;
•the success or failure of our business strategy;
•investor perception of us and our industry;
•changes in accounting standards, policies, guidance, interpretations or principles;
•the overall performance of the equity markets;
•general political and economic conditions, and other external factors.
In addition, the stock market in general, and the stocks of medical device companies in particular, have experienced extreme price and volume fluctuations that have often been unrelated or disproportionate to the operating performance of those companies. This could limit or prevent investors from readily selling their shares and may otherwise negatively affect the liquidity of our common stock. Securities class action litigation has often been instituted against companies following periods of volatility in the overall market and in the market price of a company’s securities. This litigation, if instituted against us, could result in very substantial costs, divert our management’s attention and resources, and harm our business, financial condition and results of operation.
Your percentage of ownership in us may be diluted and issuances of substantial amounts of our common stock, or the perception that such issuances may occur, could cause the market price of our common stock to decline significantly, even if our business is performing well.
As with any public company, your percentage ownership in us may be diluted because of equity issuances for acquisitions and investments, capital-raising transactions or otherwise, including equity awards that we have granted and we expect to grant in the future to our directors, officers and employees. As of December 31, 2020, approximately 0.8 million shares of our common stock were subject to unvested restricted stock units and approximately 2.4 million shares of our common stock were subject to exercisable stock options with a weighted average exercise price of $14.59.
Since July 1, 2015, we have issued an aggregate of 13.9 million shares of our common stock for capital-raising purposes. Most recently, we issued an aggregate of 7,820,000 shares of our common stock (including 1,020,000 shares sold to the underwriter upon exercise of an underwriter option) in an underwritten offering completed in January 2020 at price to the public of $12.50 per share, before underwriting discounts and commissions.
Further, the market price of our common stock could decline as a result of the issuance, including sale, of a large number of shares of our common stock, and the perception that these sales could occur may also depress the market price of our common stock. A decline in the price of our common stock might impede our ability to raise capital through the issuance of additional shares of our common stock or other equity or equity-linked securities.
We are a "smaller reporting company" and we cannot be certain if the reduced disclosure requirements applicable to smaller reporting companies will make our common stock less attractive to investors.
The SEC adopted amendments to the definition of “smaller reporting company” that became effective in September 2018. Under the new definition, generally, a company qualifies as a smaller reporting company if it has a public float of less than $250 million as of the last business day of its second fiscal quarter. If a company qualifies as a smaller reporting company on that date, it may elect to reflect that determination and use the smaller reporting company scaled disclosure accommodations in its subsequent SEC filings. Our public float as of the last business day of our most recent second fiscal quarter, was less than $250 million, and as such, we qualify as a smaller reporting company and are following certain of the scaled disclosure accommodations, including providing audited financial statements and management discussion and analysis for our two most recent fiscal years, in contrast to other reporting companies, which must provide audited financial statements and management discussion and analysis for their three most recent fiscal years. We will measure our public float as of the last business day of our most recent second fiscal quarter every year and will continue to qualify as a smaller reporting company until our public float is $250 million or more as of such date.
Investors may find our common stock less attractive because we follow certain of the scaled disclosure accommodations available to smaller reporting companies, either one of which may result in a less active trading market for our common stock and our stock price may decline and/or become more volatile.
We may issue preferred stock with terms that could dilute the voting power or reduce the value of our common stock.
While we have no specific plan to issue preferred stock, our amended and restated certificate of incorporation authorizes us to issue, without stockholder approval, one or more series of preferred stock having such designation, powers, privileges, preferences, including preferences over our common stock respecting dividends and distributions, terms of redemption and relative participation, optional, or other rights, if any, of the shares of each such series of preferred stock and any qualifications, limitations or restrictions thereof, as our board of directors may determine. The terms of one or more series of preferred stock could dilute the voting power or reduce the value of our common stock. For example, the repurchase or redemption rights or liquidation preferences we could assign to holders of preferred stock could affect the residual value of the common stock.
If securities or industry analysts do not publish research or publish inaccurate or unfavorable research about our business, our stock price and trading volume could decline.
The trading market for our common stock depends in part on the research and reports that securities or industry analysts publish about us or our business. If current or future analysts who cover us were to downgrade our stock or publish inaccurate or unfavorable research about our business, our stock price would likely decline. If one or more of these analysts were to stop covering us or were to stop regularly publishing reports on us, demand for our stock could decrease, which might cause our stock price and trading volume to decline.
We do not anticipate paying cash dividends, and accordingly, stockholders must rely on stock appreciation for any return on their investment.
We have never declared or paid cash dividends on our common stock, and we do not currently expect to declare or pay any such cash dividends in the foreseeable future. Instead, we intend to retain our future earnings, if any, to fund the development and growth of our business. Payment of cash dividends, if any, will depend on our financial condition, results of operations, capital requirements and other factors and will be at the discretion of our board of directors. Furthermore, we are subject to various laws and regulations that may restrict our ability to pay dividends and are subject to contractual restrictions on, or prohibitions against, the payment of dividends. Due to the foregoing, the return on your investment in our common stock will likely depend entirely upon any future appreciation and our common stock may not appreciate. Investors seeking cash dividends should not invest in our common stock.
Certain provisions in our charter documents and Delaware law could discourage takeover attempts and lead to management entrenchment and, therefore, may depress the market price of our common stock.
Our amended and restated certificate of incorporation and amended and restated bylaws contain provisions that could have the effect of delaying or preventing changes in control or changes in our management without the consent of our board of directors, including, among other things:
•a classified board of directors with three-year staggered terms, which may delay the ability of stockholders to change the membership of a majority of our board of directors;
•no cumulative voting in the election of directors, which limits the ability of minority stockholders to elect director candidates;
•the ability of our board of directors to determine to issue shares of preferred stock and to determine the price and other terms of those shares, including preferences and voting rights, without stockholder approval, which could be used to significantly dilute the ownership of a hostile acquirer;
•the exclusive right of our board of directors to elect a director to fill a vacancy created by the expansion of our board of directors or by the resignation, death or removal of a director, which prevents stockholders from filling vacancies on our board of directors;
•limitations on the removal of directors;
•a prohibition on stockholder action by written consent, which forces stockholder action to be taken at an annual or special meeting of our stockholders;
•the requirement that a special meeting of stockholders be called only by the chairman of our board of directors, our chief executive officer, our president (in absence of a chief executive officer) or our board of directors, which may delay the ability of our stockholders to force consideration of a proposal or to take action, including the removal of directors;
•advance notice procedures that stockholders must comply with to nominate candidates to our board of directors or to propose matters to be acted upon at a stockholders’ meeting, which may discourage or deter a potential acquirer from conducting a solicitation of proxies to elect the acquirer’s own slate of directors or otherwise attempting to obtain control of us;
•the requirement for the affirmative vote of holders of at least 66 2⁄3% of the voting power of all of the then outstanding shares of our voting stock, voting together as a single class, to amend or repeal the provisions of our amended and restated certificate of incorporation and of our amended and restated bylaws that relate to the matters described above, which may inhibit the ability of an acquirer from amending our amended and restated certificate of incorporation or amended and restated bylaws to facilitate a hostile acquisition; and
•the ability of our board of directors, by majority vote, to amend our amended and restated bylaws, which may allow our board of directors to take additional actions to prevent a hostile acquisition and inhibit the ability of an acquirer from amending our amended and restated bylaws to facilitate a hostile acquisition.
We believe that these provisions protect our stockholders from coercive or harmful takeover tactics by requiring potential acquirers to negotiate with our board of directors and by providing our board of directors with adequate time to assess any acquisition proposal.
We are also subject to certain anti-takeover provisions under the DGCL. Under the DGCL, a corporation may not, in general, engage in a business combination with any holder of 15% or more of its capital stock unless the holder has held the
stock for three years or, among other things, our board of directors has approved the transaction.
The provisions in our amended and restated certificate of incorporation and amended and restated bylaws and the anti-takeover provisions under the DGCL, may discourage, delay, prevent or make it more difficult for stockholders or potential acquirers to obtain control of our board of directors or initiate actions that are opposed by our then-current board of directors, including a merger, tender offer, or proxy contest involving our company. Any delay or prevention of a change of control transaction or changes in our board of directors could cause the market price of our common stock to decline. Even absent a takeover attempt, the existence of these provisions may adversely affect the prevailing market price of our common stock if they are viewed as discouraging future takeover attempts.
Our amended and restated certificate of incorporation designates the Court of Chancery of the State of Delaware as the sole and exclusive forum for certain litigation that may be initiated by our stockholders, which could limit our stockholders’ ability to obtain a favorable judicial forum for disputes with us.
Our amended and restated certificate of incorporation provides that, unless we consent in writing to the selection of an alternative forum, the Court of Chancery of the State of Delaware shall be the sole and exclusive forum for: (i) any derivative action or proceeding brought on our behalf; (ii) any action asserting a claim of breach of fiduciary duty owed by any of our directors, officers or other employees or our stockholders; (iii) any action asserting a claim arising pursuant to any provision of the DGCL or our amended and restated certificate of incorporation or amended and restated bylaws; or (iv) any action asserting a claim governed by the internal affairs doctrine. Our amended and restated certificate of incorporation further provides that any person or entity purchasing or acquiring any interest in shares of our capital stock shall be deemed to have notice of and to have consented to the provisions described above. These provisions may limit our stockholders’ ability to obtain a favorable judicial forum for disputes with us.
Other Risks Related to our Business and Financial Condition
Our business could suffer if we lose the services of key members of our senior management or fail to hire and retain other personnel on whom our business relies.
Our ability to execute our business strategy and compete in the highly competitive medical device industry depends, in part, on our ability to attract and retain highly qualified personnel. Companies in the medical device industry in general have experienced a high rate of personnel turnover. Loss of key employees, including any of our scientific, technical and managerial personnel, could adversely affect our ability to successfully execute our business strategy, which could have a material and adverse effect on our business, results of operations and financial condition. We would be adversely affected if we fail to adequately prepare for future turnover of our senior management team. Moreover, replacing key employees may be a difficult, costly and protracted process, and we may not have other personnel with the capacity to assume all of the responsibilities of a departing employee. Competition for qualified personnel, particularly for key positions, is intense among companies in our industry, particularly in the San Diego, California area, and many of the organizations against which we compete for qualified personnel have greater financial and other resources and different risk profiles than our company, which may make them more attractive employers. All of our employees, including our management personnel, may terminate their employment with us at any time without notice. If we cannot attract and retain highly qualified personnel, as needed, we may not achieve our financial and other goals.
Moreover, future internal growth could impose significant added responsibilities on our management, and we will need to identify, recruit, maintain, motivate and integrate additional employees to manage growth effectively. If we do not effectively manage such growth, our expenses may increase more than expected, we may not achieve our goals, and our ability to generate and/or grow revenue could be diminished.
We may have significant product liability exposure and our insurance may not cover all potential claims.
We are exposed to product liability and other claims. Spine surgery involves significant risk of serious complications, including bleeding, nerve injury, paralysis and even death. In addition, if neurosurgeons and orthopedic spine surgeons are not sufficiently trained in the use of our products, they may misuse or ineffectively use our products, which may result in unsatisfactory patient outcomes or patient injury. We could become the subject of product liability lawsuits alleging that component failures, malfunctions, manufacturing flaws, design defects, or inadequate disclosure of product-related risks or product-related information resulted in an unsafe condition or injury to patients. In addition, the development of allograft
implants and technologies for human tissue repair and treatment may entail particular risk of transmitting diseases to human recipients, and any such transmission could result in the assertion of product liability claims against us.
Product liability claims are expensive to defend, divert our management’s attention and, if we are not successful in defending the claim, can result in substantial monetary awards against us or costly settlements. Further, successful product liability claims made against one or more of our competitors could cause claims to be made against us or expose us to a perception that we are vulnerable to similar claims. Any product liability claim brought against us, with or without merit and regardless of the outcome or whether it is fully pursued, may result in: decreased demand for our products; injury to our reputation; significant litigation costs; product recalls; loss of revenue; the inability to commercialize new products or product candidates; and adverse publicity regarding our products. Any of these may have a material and adverse effect on our reputation with existing and potential customers and on our business, financial condition and results of operations.
Our existing product liability insurance coverage may be inadequate to protect us from any liabilities we might incur. If a product liability claim or series of claims is brought against us for uninsured liabilities or more than our insurance coverage, our business could suffer. In addition, a recall of some of our products, whether or not the result of a product liability claim, could result in significant costs and loss of customers.
Our insurance policies are expensive and protect us only from some risks, which will leave us exposed to significant uninsured liabilities.
We do not carry insurance for all categories of risk to which our business is or may be exposed. Some of the policies we maintain include general liability, foreign liability, employee benefits liability, property, umbrella, employment practices, workers’ compensation, products liability, cyber, and directors’ and officers’ insurance. We do not know, however, if we will be able to maintain insurance coverage at a reasonable cost or in sufficient amounts or scope to protect us against losses. Even if we obtain insurance, a claim could exceed the amount of our insurance coverage or it may be excluded from coverage under the terms of the policy. Further, insurance coverage may not be available or successfully secured for loss profits or business interruption relating to the COVID-19 pandemic and its impacts. Any significant uninsured liability may require us to pay substantial amounts, which would adversely affect our cash position and results of operations.
We may be subject to claims that we, our employees, or our independent sales agents or stocking distributors have wrongfully used or disclosed alleged trade secrets of our competitors or are in breach of non-competition or non-solicitation agreements with our competitors.
Many of our employees were employed at other medical device companies, including our competitors or potential competitors, in some cases immediately prior to joining us. In addition, many of our independent sales agents and stocking distributors sell, or in the past have sold, products of our competitors. We may be subject to claims that we, our employees or our independent sales agents or stocking distributors have intentionally, inadvertently or otherwise used or disclosed trade secrets or other proprietary information of former employers or competitors. In addition, we have been and may in the future be subject to claims that we caused an employee, or encouraged/assisted an independent sales agent, to breach the terms of his or her non-competition or non-solicitation agreement. Litigation may be necessary to defend against these claims. Litigation is expensive, time-consuming and could divert management attention and resources away from our business. Even if we prevail, the cost of litigation could affect our profitability. If we do not prevail, in addition to any damages we might have to pay, we may lose valuable intellectual property rights or employees, independent sales agents or stocking distributors. There can be no assurance that this type of litigation or the threat thereof will not adversely affect our ability to engage and retain key employees, sales agents or stocking distributors. See also the risk factors titled, “Risks Related to Manufacturing, Commercial Operations and Commercialization - If we are unable to maintain and expand our network of independent sales agents and stocking distributors, we may not be able to maintain or grow our revenue,” and “Our business could suffer if we lose the services of key members of our senior management or fail to hire and retain other personnel on whom our business relies” above.
We have overlapping board membership with Integra, which may lead to conflicting interests, and one of our directors continues to own a substantial amount of Integra common stock and equity awards covering Integra stock.
Two of our board members also serve as board members of Integra. Our directors who are members of Integra’s board of directors have fiduciary duties to Integra’s stockholders, as well as fiduciary duties to our stockholders. In addition, several of our directors own or have rights to acquire Integra common stock (in at least one case, a substantial amount).
As a result of the foregoing, there may be the appearance of a conflict of interest and there is the potential for a conflict of interest with respect to matters involving or affecting both companies, such as when we or Integra consider acquisitions and other corporate opportunities that may be suitable for each company. In addition, potential conflicts of interest could arise in connection with the resolution of any dispute that may arise between Integra and us regarding the terms of the agreements governing our separation from Integra, the Tax Matters Agreement or under other agreements between Integra and us, including with respect to indemnification matters. From time to time, we may enter into transactions with Integra and/or its subsidiaries or other affiliates. There can be no assurance that the terms of any such transactions will be as favorable to us, Integra or any of our or their subsidiaries or affiliates as would be the case were there no overlapping board membership or ownership interest.
We may be subject to continuing contingent liabilities of Integra.
Even after our separation from Integra, there are several significant areas where Integra’s liabilities may become our obligations. For example, under the Code and the related rules and regulations, each corporation that was a member of the Integra consolidated U.S. federal income tax reporting group during any taxable period or portion of any taxable period ending on or before the effective time of the distribution is jointly and severally liable for the U.S. federal income tax liability of the entire Integra consolidated tax reporting group for that taxable period. In addition, the Tax Matters Agreement allocates the responsibility for prior period taxes of the Integra consolidated tax reporting group between us and Integra. Under this allocation, we may be responsible for taxes that we would not have otherwise incurred, or that we would have incurred but in different amounts and/or at different times, on a standalone basis outside of the Integra consolidated group, and the amount of such taxes could be significant. If Integra is unable to pay any prior period taxes for which it is responsible, we could have to pay the entire amount of such taxes.
General Risk Factors
Changes in financial accounting standards or practices or existing taxation rules or practices may cause adverse unexpected revenue and/or expense fluctuations and affect our reported results of operations.
A change in accounting standards or practices or a change in existing taxation rules or practices can have a significant effect on our reported results and may even affect our reporting of transactions completed before the change is effective. New accounting pronouncements and taxation rules and varying interpretations of accounting pronouncements and taxation practice have occurred and may occur in the future. The method in which we market and sell our products may have an impact on the manner in which we recognize revenue. In addition, changes to existing rules or the questioning of current practices may adversely affect our reported financial results or the way we conduct our business. Additionally, changes to existing accounting rules or standards, such as the potential requirement that U.S. registrants prepare financial statements in accordance with International Financial Reporting Standards, may adversely impact our reported financial results and business, and may further require us to incur greater accounting fees.
Environmental, social and corporate governance (ESG) regulations, policies and provisions may make our supply chain more complex and may adversely affect our relationships with customers.
There is an increasing focus on the governance of environmental and social risks. A number of our customers who are payors or distributors have adopted, or may adopt, procurement policies that include ESG provisions that their suppliers or manufacturers must comply with, or they may seek to include such provisions in their terms and conditions. An increasing number of participants in the medical device industry are also joining voluntary ESG groups or organizations, such as the Responsible Business Alliance. These ESG provisions and initiatives are subject to change, can be unpredictable, and may be difficult and expensive for us to comply with, given the complexity of our supply chain and the outsourced manufacturing of certain components of our products. If we are unable to comply, or are unable to cause our suppliers to comply, with such policies or provisions, a customer may stop purchasing products from us, and may take legal action against us, which could harm our reputation, revenue and results of operations.
Our business could be negatively impacted by corporate citizenship and ESG matters and/or our reporting of such matters.
There is an increasing focus from certain investors, customers, consumers, and other stakeholders concerning corporate citizenship and sustainability matters. We could be perceived as not acting responsibly in connection with these matters. Our business could be negatively impacted by such matters. Any such matters, or related corporate citizenship and sustainability matters, could have a material adverse effect on our business.
ITEM 1B. UNRESOLVED STAFF COMMENTS
As of the filing of this report, we had no unresolved comments from the SEC staff regarding our periodic or current reports under the Exchange Act that were received not less than 180 days before the end of our fiscal year to which this report relates.
ITEM 2. PROPERTIES
We lease real property to support our business. The following lists those leased properties that we believe are material to our business. We believe that our facilities meet our current needs and that we will be able to renew these leases when needed on acceptable terms or find alternative facilities.
|Location||Approx. Square Feet||Purpose|
|Carlsbad, California||82,000||Design, development, marketing, and inspection of our orthobiologics and spinal implant products and distribution of certain of our spinal implant products. Also serves as our principal executive offices and houses one of our cadaveric training laboratories and our prototyping development and testing operations.|
|Irvine, California||70,000||Manufacture and distribution of our orthobiologics products|
|Wayne, Pennsylvania||3,700||Design of our spinal implants and houses one of our cadaveric training laboratories|
|Lyon, France||2,600||International sales and marketing|Our manufacturing facilities are registered with the FDA. Our facilities are subject to FDA inspection to ensure compliance with its Quality System Regulations. For further information regarding the status of FDA inspections, see the "Item 1. Business- Regulation," above.
ITEM 3. LEGAL PROCEEDINGS
From time to time, we are subject to legal proceedings and claims in the ordinary course of business. While management presently believes that the ultimate outcome of these proceedings, individually and in the aggregate, will not materially harm our financial position, cash flows, or overall trends in results of operations, legal proceedings are subject to inherent uncertainties, and unfavorable rulings or outcomes could occur that have individually or in aggregate, a material adverse effect on our business, financial condition or operating results. We are not currently subject to any pending material litigation, other than ordinary routine litigation incidental to our business, as described above.
ITEM 4. MINE SAFETY DISCLOSURES
|ITEM 5.||MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES|
Market Information and Holders
Our common stock is listed on the Nasdaq Global Select Market under the symbol “SPNE.” As of February 26, 2021, we had 314 stockholders of record. The number of stockholders of record is based upon the actual number of holders registered on our books at such date. A substantially greater number of holders of our common stock are “street name” or beneficial holders, whose shares are held by banks, brokers and other financial institutions.
We have never declared or paid any cash dividends on our capital stock. We currently intend to retain any future earnings to finance the operation of our business, and we do not expect to declare or pay any dividends in the foreseeable future.
Equity Compensation Plan Information
Information about our equity compensation plan is incorporated herein by reference to Part III, Item 12 of this report.
Recent Sales of Unregistered Securities
During the fourth quarter of 2020, we did not issue any securities that were not registered under the Securities Act of 1933, as amended (the Securities Act).
Purchases of Equity Securities by the Issuer
The table below is a summary of our purchases of our common stock for the months with purchase activities during the quarter ended December 31, 2020.
|Period||Total Number of Shares Purchased (1)||Average Price Paid per Share||Total Number of Shares Purchased as Part of Publicly Announced Plans or Programs||Maximum Number of Shares That May Yet be Purchased Under the Plans or Programs|
|October 1 - October 31||1,580 ||$||14.50 ||— ||— |
|November 1 - November 30||1,540 ||$||13.18 ||— ||— |
|December 1 - December 31||3,166 ||$||15.40 ||— ||— |
|(1)||These shares were surrendered to the Company to satisfy tax withholdings obligations in connection with the vesting of restricted stock awards. |
|ITEM 6.||SELECTED FINANCIAL DATA|
As a "smaller reporting company" as defined by Item 10 of Regulation S-K, the Company is not required to provide this information.
ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
The terms “we,” “us,” “our,” “SeaSpine” or the “Company” refer collectively to SeaSpine Holdings Corporation and its wholly-owned subsidiaries, unless otherwise stated. All information in this report is based on our fiscal year. Unless otherwise stated, references to particular years, quarters, months or periods refer to our fiscal years ending December 31 and the associated quarters, months and periods of those fiscal years.
This Management’s Discussion and Analysis of Financial Condition and Results of Operations contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended (the Exchange Act). The matters discussed in these forward-looking statements are subject to risk and uncertainties that could cause actual results to differ materially from those made, projected or implied in the forward-looking statements. Such risks and uncertainties may also give rise to future claims and increase exposure to contingent liabilities. Please see the “Risk Factors” section for a discussion of the uncertainties, risks and assumptions associated with these statements. We undertake no obligation to publicly update or revise any forward-looking statements, whether as a result of new information, future events, or otherwise.
You can identify these forward-looking statements by forward-looking words such as “believe,” “may,” “could,” “will,” “estimate,” “continue,” “anticipate,” “intend,” “seek,” “plan,” “expect,” “should,” “would” and similar expressions.
These risks and uncertainties arise from (among other factors):
•our expectations and estimates concerning future financial performance, financing plans and the impact of competition;
•our ability to successfully develop new and next-generation products and the costs associated with designing and developing those new and next-generation products, including risks inherent in collaborations, such as with restor3d, Inc. and 7D Surgical, or use of nascent manufacturing techniques, such as additive processing/3D printing;
•physicians’ willingness to adopt our recently launched and planned products, customers’ continued willingness to pay for our products and third-party payors’ willingness to provide or continue coverage and appropriate reimbursement for any of our products and our ability to secure regulatory clearance and/or approval for products in development;
•our ability to attract and retain new, high-quality distributors, whether as a result of perceived deficiencies, or gaps, in our existing product portfolio, inability to reach agreement on financial or other contractual terms or otherwise, as well as disruption associated with restrictive covenants to, which distributors may be subject and potential litigation and expense associate therewith;
•the full extent to which the COVID-19 pandemic will, directly or indirectly, impact our business, results of operations and financial condition, including our sales, expenses, supply chain integrity, manufacturing capability, research and development activities, including arising from or relating to deferrals of procedures using our products, disruptions or restrictions on the ability of many of our employees and of third parties on which we rely to work effectively, and temporary closures of our facilities and of the facilities of our customers and suppliers;
•our ability to continue to invest in medical education and training, product development, and/or sales and commercial marketing initiatives at levels sufficient to drive future revenue growth;
•anticipated trends in our business, including consolidation among hospital systems, healthcare reform in the United States, increased pricing pressure from our competitors or hospitals, exclusion from major healthcare systems, whether as a result of unwillingness to provide required pricing or otherwise, and changes in third-party payment systems;
•the risk of supply shortages, and the associated potentially long-term disruption to product sales, including as a result of the pandemic and of our dependence on PcoMed to supply products incorporating NanoMetalene technology and a limited number of third-party suppliers for components and raw materials and certain processing services;
•unexpected expenses and delay and our ability to manage timelines and costs related to manufacturing our products including as a result of litigation or developing and supporting the full commercial launch of new products or relating to the pandemic;
•our ability to obtain additional debt and equity financing to fund capital expenditures and working capital requirements and acquisitions;
•our ability to complete acquisitions, integrate operations post-acquisition and maintain relationships with customers of acquired entities;
•our ability to support the safety and efficacy of our products with long-term clinical data;
•existing and future regulations affecting our business, both in the United States and internationally, and enforcement of those regulations;
•our ability to protect our intellectual property, including unpatented trade secrets, and to operate without infringing or misappropriating the proprietary rights of others;
•general economic and business conditions, in both domestic and international markets; and
•other risk factors described in the section entitled “Risk Factors.”
These factors should not be construed as exhaustive and should be read in conjunction with the other cautionary statements included in this report.
Spin-off from Integra
SeaSpine was incorporated in Delaware on February 12, 2015 in connection with the spin-off of the orthobiologics and spinal implant business of Integra. The spin-off occurred on July 1, 2015. Subsequent to the spin-off, our financial statements are presented on a consolidated basis, as we became a separate publicly-traded company on July 1, 2015.
We are a global medical technology company focused on the design, development and commercialization of surgical solutions for the treatment of patients suffering from spinal disorders. We have a comprehensive portfolio of orthobiologics and spinal implant solutions to meet the varying combinations of products that neurosurgeons and orthopedic spine surgeons need to perform fusion procedures in the lumbar, thoracic and cervical spine. We believe this broad combined portfolio of orthobiologics and spinal implant products is essential to meet the “complete solution” requirements of such surgeons.
We report revenue in two product categories: orthobiologics and spinal implants. Our orthobiologics products consist of a broad range of advanced and traditional bone graft substitutes designed to improve bone fusion rates following a wide range of orthopedic surgeries, including spine, hip, and extremities procedures. Our spinal implant portfolio consists of an extensive line of products to facilitate spinal fusion in degenerative, minimally invasive surgery (MIS), and complex spinal deformity procedures.
Our U.S. sales organization consists of regional and territory managers who oversee a broad network of independent orthobiologics and spinal implant sales agents. We pay these sales agents commissions based on the sales of our products. Our international sales organization consists of a sales management team that oversees a network of independent orthobiologics and spinal implant stocking distributors that purchase products directly from us and independently sell them. For the years ended December 31, 2020 and 2019, international sales accounted for approximately 10% and 11% of our revenue, respectively. Our policy is not to sell our products through or to participate in physician-owned distributorships.
For the year ended December 31, 2020, our total revenue, net was $154.3 million and our net loss was $43.2 million. For the same period, revenue from sales of orthobiologics and spinal implants totaled $78.4 million and $75.9 million, respectively. We will continue to invest in the expansion of our business, primarily in sales, marketing and research and development, and we expect to continue to incur losses. As of December 31, 2020, our cash and cash equivalents totaled $76.8 million. In January
2020, we completed an underwritten offering of our common stock that raised net proceeds of approximately $91.6 million, after deducting underwriting discounts and commissions and estimated offering expenses.
As of February 26, 2021, we had 421 employees.
Components of Our Results of Operations
Our net revenue is derived primarily from the sale of orthobiologics and spinal implant products across North America, Europe, Asia Pacific and Latin America. Sales are reported net of returns, rebates, group purchasing organization fees and other customer allowances.
In the United States, we generate most of our revenue by consigning our orthobiologics products and by consigning or loaning our spinal implant sets to hospitals and independent sales agents, who in turn either deliver them to hospitals for a single surgical procedure, after which they are returned to us, or leave them with hospitals that are high volume users for multiple procedures. The spinal implant sets typically contain the instruments, disposables, and spinal implants required to complete a surgery. We ship replacement inventory to independent sales agents to replace the consigned inventory used in surgeries. We maintain and replenish loaned sets at our kitting and distribution centers and return replenished sets to a hospital or independent sales agent for the next procedure. We recognize revenue on these consigned or loaned products when they have been used or implanted in a surgical procedure.
For all other sales transactions, including sales to international stocking distributors and private label partners, we generally recognize revenue when the products are shipped and the customer or stocking distributor obtains control of the products. There is generally no customer acceptance or other condition that prevents us from recognizing revenue in accordance with the delivery terms for these sales transactions.
Cost of Goods Sold
Cost of goods sold primarily consists of the costs of finished goods purchased directly from third parties and raw materials used in the manufacturing of our products, plant and equipment overhead, labor costs and packaging costs. The majority of our orthobiologics products are designed and manufactured internally. The cost of human tissue and fixed manufacturing overhead costs are significant drivers of the cost of goods sold, and consequently our orthobiologics products, at current production volumes, generate lower gross margin than our spinal implant products. We rely on third-party suppliers to manufacture our spinal implant products, and we assemble them into surgical sets at our kitting and distribution centers. The cost to inspect incoming finished goods is included in the cost of goods sold. Other costs included in cost of goods sold include amortization of product technology intangible assets, royalties, scrap and consignment losses, and charges for expired, excess and obsolete inventory.
Selling and Marketing Expense
Our selling and marketing expenses consist primarily of sales commissions to independent sales agents, payroll and other headcount related expenses, marketing expenses, shipping, third-party logistics expenses, depreciation of instrument sets, instrument replacement expense, and cost of medical education and training.
General and Administrative Expense
Our general and administrative expenses consist primarily of payroll and other headcount related expenses, and expenses for information technology, legal, human resources, insurance, finance, and management. We also record gains or losses associated with changes in the fair value of contingent consideration liabilities in general and administrative expenses.
Research and Development Expense
Our research and development (R&D) expenses primarily consist of expenses related to the headcount for engineering, product development, clinical affairs and regulatory functions, as well as consulting services, third-party prototyping services, outside research and clinical studies activities, and materials, production and other costs associated with development of our products. We expense R&D costs as they are incurred.
While our R&D expenses fluctuate from period to period based on the timing of specific initiatives, we expect these costs will increase over time as we continue to design and commercialize new products and expand our product portfolio, add related personnel and conduct additional clinical activities.
Our intangible amortization, including the amounts reported in cost of goods sold, consists of acquisition-related amortization. We expect total annual amortization expense (including amounts reported in cost of goods sold) to be approximately $4.2 million in 2021, $4.1 million in 2022, $3.4 million in 2023, $1.5 million in 2024, and $0.2 million in 2025. See "RESULTS OF OPERATIONS-Year Ended December 31, 2020 Compared to Year Ended December 31, 2019-Impairment of Intangible Assets," below.
COVID-19 Pandemic - Impact on our Business
The COVID-19 pandemic has presented a substantial public health and economic challenge around the world and has materially and adversely affected our business. We continue to closely monitor developments related to the pandemic and our decisions will continue to be driven by the health and well-being of our employees, our distributor and surgeon customers, and their patients while maintaining operations to support our customers and their patients in the near-term.
•Surgery Deferrals: From late March 2020 to mid-May 2020, among other impacts on our business related to the pandemic, surgeons and their patients deferred surgical procedures in which our products otherwise could have been used. This decrease in demand for our products recovered to varying degrees beginning in the latter half of May as local conditions improved in certain geographies that opened after an initial improvement in COVID-19 infection rates, allowing patients to resume receiving their treatments, though demand was below pre-pandemic levels for much of 2020 and continues to be below pre-pandemic levels thus far into 2021. We expect to see continued volatility throughout 2021 and possibly thereafter as geographies respond to current local conditions. The duration of deferrals of surgical procedures, the magnitude of such deferrals, the timing and extent of the economic impact of the pandemic, and the pace at which the economy recovers therefrom, cannot be determined at this time. We continue to work closely with our surgeon customers, distributors and suppliers to navigate through this unforeseen event while maintaining flexible operations and investing for future growth.
•Operations. Our sales, marketing and research and development efforts have continued since the outbreak of the pandemic, but steps we have taken in response to the pandemic have adversely affected our business. To protect the safety, health and well-being of our employees, distributor and surgeon customers, and communities, we implemented preventative measures including travel restrictions, the temporary closures of certain of our facilities, and requiring all office-based employees to work from home, except for those related to manufacturing, distribution and select others, as permitted under governmental orders. Production at our Irvine orthobiologics manufacturing facility was temporarily halted in April and May 2020 and was restarted in June 2020. The change in the manner in which our workforce is functioning could adversely affect sales and may delay the product launches we plan to make in 2021 and beyond.
Our manufacturing, distribution and supply chain has largely been uninterrupted, but could be disrupted as a result of the pandemic, including because of staffing shortages, production slowdowns, stoppages, or disruptions in delivery systems.
•Cost Containment: We initiated actions to generate savings in areas such as travel, events, clinical studies, and consulting. We also implemented a temporary freeze on new hires and our senior leadership team voluntarily agreed to a 25% reduction in their base salaries from April 26, 2020 through June 20, 2020.
•Product Development: In the early stages of the pandemic, we reduced and/or delayed spending on several planned product development and launch initiatives. We have since increased our spending on product development activities and capital expenditures and inventory for product launches from the reduced levels during the early stages of the pandemic as our revenue and cash flow and demand for our products improved. We continue to evaluate the timing and scope of planned product development and launch initiatives and capital expenditures and inventory growth investments to support those initiatives. Based on that evaluation, we may delay and/or reduce additional spending associated with these initiatives, which may delay the product launches we plan to make in 2021 and beyond, and could adversely affect our future revenue growth or such growth may not be consistent with the timelines we anticipated previously.
•Year ended 2020 Results. Due to the impacts from the pandemic, our total revenue, net, gross profit and gross margin for the year ended December 31, 2020 were significantly lower compared to the same period in 2019.
•Outlook. At this time, the full extent of the impact of the pandemic on our business, financial condition and results of operations is uncertain and cannot be predicted with reasonable accuracy and will depend on future developments that are also uncertain and cannot be predicted with reasonable accuracy.
As of the filing date of this report, the extent to which the pandemic may impact our financial condition or results of operations or guidance is uncertain. The effect of the pandemic will not be fully reflected in our results of operations and overall financial performance until future periods. For additional information on the various risks posed by the pandemic on our business, financial condition and results of operations, please see "Risk Factors" in Part I, Item 1A of this report.
RESULTS OF OPERATIONS
| ||Year Ended December 31,|
| (In thousands, except percentages)||2020||2019|
|Total revenue, net||$||154,345 ||$||159,083 |
|Cost of goods sold||56,841 ||57,979 |
|Gross profit||97,504 ||101,104 |
|Gross margin||63 ||%||64 ||%|
|Selling and marketing||84,304 ||83,445 |
|General and administrative||35,874 ||33,594 |
|Research and development||16,258 ||15,125 |
|Intangible amortization||3,169 ||3,169 |
|Impairment of intangible assets||1,325 ||4,993 |
|Total operating expenses||140,930 ||140,326 |
|Other income, net||(463)||(302)|
|Loss before income taxes||(42,963)||(38,920)|
|Provision for income taxes||218 ||356 |
Year Ended December 31, 2020 Compared to Year Ended December 31, 2019
Total revenue, net for the year ended 2020 decreased by $4.7 million, or 3%, to $154.3 million compared to $159.1 million for the prior year.
|Year Ended December 31,|
|2020||2019||2020 vs. 2019|
| ||(In thousands)||% Change|
|Orthobiologics||$||78,383 ||$||81,299 ||(4)||%|
|United States||71,346 ||73,543 ||(3)||%|
|International||7,037 ||7,756 ||(9)||%|
| % of total revenue, net||51 ||%||51 ||%|
|Spinal Implants||$||75,962 ||$||77,784 ||(2)||%|
|United States||67,550 ||68,308 ||(1)||%|
|International||8,412 ||9,476 ||(11)||%|
| % of total revenue, net||49 ||%||49 ||%|
|Total revenue, net||$||154,345 ||$||159,083 ||(3)||%|
|Year Ended December 31,|
| ||2020||2019||2020 vs. 2019|
| ||(In thousands)||% Change|
|United States||138,896 ||141,851 ||(2)||%|
| % of total revenue, net||90 ||%||89 ||%|
|International||15,449 ||17,232 ||(10)||%|
| % of total revenue, net||10 ||%||11 ||%|
|Total revenue, net||$||154,345 ||$||159,083 ||(3)||%|
Revenue from orthobiologics sales in the United States decreased $2.2 million in 2020 compared to 2019. This decrease was driven by significantly lower demand during the second quarter of 2020 for our orthobiologics products due to hospitals and patients deferring procedures and other factors related to the impact of the COVID-19 pandemic. Revenue from orthobiologics sales internationally decreased $0.7 million in 2020 compared to 2019 and was similarly affected by significantly reduced demand from our stocking distributors caused by the impact of the pandemic. See "COVID-19 Pandemic - Impact on our Business," above.
Revenue from spinal implant sales in the United States decreased $0.8 million in 2020 compared to 2019. This decrease was driven by significantly lower demand during the second quarter of 2020 for our spinal implant products due to hospitals and patients deferring procedures and other factors related to the COVID-19 pandemic. Revenue from international sales of spinal implants decreased $1.1 million in 2020 compared to 2019 and was similarly affected by significantly reduced demand from our stocking distributors caused by the impact of the pandemic.
Cost of Goods Sold and Gross Margin
Cost of goods sold in 2020 decreased $1.1 million from 2019 to $56.8 million. Gross margin was 63% in 2020 compared to 64% in 2019. The decrease in gross margin was primarily due to the impact of expensing all costs associated with our Irvine manufacturing facility while production there was temporarily halted during April and May 2020. Additionally, we incurred higher spinal implant excess and obsolete inventory charges due to declining sales of older systems and from higher purchases of low sales volume implants that are deployed in standard set configurations of new and recently launched systems. These items were offset by $1.2 million in lower product technology intangible asset amortization.
Cost of goods sold included $1.0 million and $2.2 million of amortization for product technology intangible assets for 2020 and 2019, respectively, and $1.0 million and $0.9 million of depreciation expense for 2020 and 2019, respectively.
Selling and Marketing
Selling and marketing expenses increased $0.9 million to $84.3 million in 2020. The increase was mainly driven by higher headcount and related expenses, third party logistics fees and depreciation on recently deployed spinal implant sets, partially offset by lower sales commission expense due to a decline in revenue and decreases in tradeshow and travel costs due to limited in-person events as a result of the pandemic.
General and Administrative
General and administrative expenses increased $2.3 million to $35.9 million in 2020. The increase was driven by higher salaries and wages and stock-based compensation expense in 2020 compared to 2019 due to increased headcount. The increase also included a $0.4 million change in non-cash losses/(gains) from the settlement of contingent consideration liabilities related to a previous acquisition.
Research and Development
R&D expenses increased $1.1 million to $16.3 million, or 11% of revenue, in 2020. The increase was due to higher research and development headcount and program-related expenses associated with the increased number of products we launched in 2020, which were slightly offset by lower travel, consulting and other fees.
Intangible amortization expense, excluding the amounts reported in cost of goods sold for product technology intangible assets, remained consistent at $3.2 million in 2020 compared to 2019.
Impairment of Intangible Assets
Impairment of intangible assets was $1.3 million and $5.0 million for the year ended December 31, 2020 and 2019, respectively. During the year ended December 31, 2020, primarily as a result of an expected shift in future product revenue mix more toward a parallel expanding interbody device designed based on our internally developed technology and, in turn, lower future revenue anticipated for the lordotic expanding implant based on acquired technology, our estimated future net sales associated with those acquired product technologies decreased. Accordingly, we evaluated the ongoing value of the product technology intangible assets associated with the acquisition of these assets. Based on this evaluation, we determined that intangible assets with a carrying amount of $1.6 million were no longer recoverable and were impaired, and we wrote those intangible assets down to their estimated fair value of $0.3 million.
During the year ended December 31, 2019, we recorded a $5.0 million intangible asset impairment charge related to a shift in our commercialization strategy with respect to those same acquired product technologies due to market trend factors, new features necessary to be competitive, and more cost-effective internal development initiatives. Accordingly, we evaluated the ongoing value of the product technology intangible assets associated with the acquisition of these assets. Based on this evaluation, we determined that intangible assets with a carrying amount of $6.8 million were no longer recoverable and were impaired, and we wrote those intangible assets down to their estimated fair value of $1.8 million.
| ||Year Ended December 31,|
| ||(In thousands)|
|Loss before income taxes||$||(42,963)||$||(38,920)|
|Provision for income taxes||218 ||356 |
|Effective tax rate||(0.5)||%||(0.9)||%|
The primary drivers of the effective tax rate in 2020 and 2019 were expenses related to current state and foreign income taxes and the reduction of foreign deferred tax assets. The 2019 expenses were partially offset by a benefit related to the release of uncertain tax positions due to the lapse of the statute of limitations.
In addition, for any pretax losses incurred subsequent to the spin-off by the consolidated U.S. tax group, we recorded no corresponding tax benefit because we have concluded that it is more-likely-than-not that we will be unable to realize the benefit from any resulting deferred tax assets. We will continue to assess our position in future periods to determine if it is appropriate to reduce a portion of our valuation allowance in the future.
In March 2020, Congress enacted the Coronavirus Aid, Relief, and Economic Security Act (CARES Act) to provide certain relief as a result of the COVID-19 pandemic. The CARES Act, among other things, includes provisions relating to net operating loss carryback periods, alternative minimum tax credit refunds, and modification to the net interest deduction limitations. The CARES Act did not have a material impact on our consolidated financial statements for the year ended December 31, 2020. We will continue to monitor any effects that may result on our consolidation financial statements from the CARES Act.
Business Factors Affecting the Results of Operations
Special Charges and Gains
We define special charges and gains as expenses and gains for which the amount or timing can vary significantly from period to period, and for which the amounts are non-cash in nature, or the amounts are not expected to recur at the same magnitude.
We believe that identification of these special charges and gains provides important supplemental information to investors regarding financial and business trends relating to our financial condition and results of operations. Investors may find this information useful in assessing comparability of our operating performance from period to period, against the business model objectives that management has established, and against other companies in our industry. We provide this information to investors so that they can analyze our operating results in the same way that management does and use this information in their assessment of our core business and valuation.
Loss before income taxes includes the following special charges/(gains) for the years ended December 31, 2020 and 2019:
|Year Ended December 31,|
|Special Charges/(Gains):||(In thousands)|
Impairment of intangible assets(1)
|1,325 ||4,993 |
Loss/(Gain) from change in fair value of contingent consideration liabilities(2)
|Total Special Charges||$||1,501 ||$||4,730 |
(1) Relates to the impairment of acquired product technology intangible assets.
(2) Relates to the net increase/(decrease) in the fair value of contingent liabilities associated with an acquisition.
The items reported above are reflected in the consolidated statements of operations as follows:
|Year Ended December 31,|
| ||(In thousands)|
|Impairment of intangible assets||$||1,325 ||$||4,993 |
|General and administrative||176 ||(263)|
|Total Special Charges||$||1,501 ||$||4,730 |
Liquidity and Capital Resources
Overview, Capital Resources, and Capital Requirements
As of December 31, 2020, we had cash and cash equivalents totaling approximately $76.8 million, and $23.0 million of current borrowing capacity was available under our credit facility. We believe that our cash and cash equivalents, and the amount currently available to us under our credit facility, will be sufficient to fund our operations and meet our contractual obligations for at least the next twelve months.
Paycheck Protection Program Loan
In April 2020, due to the economic uncertainty resulting from the impact of the COVID-19 pandemic on our operations and to support our ongoing operations and retain all employees, we applied for a loan under the Paycheck Protection Program (PPP) of the Coronavirus Aid, Relief, and Economic Security Act (CARES Act). We received a loan in the original principal amount of $7.2 million. We subsequently repaid $1.0 million of the loan. Under the terms of the PPP, subject to specified limitations, the loan may be forgiven if the proceeds are used in accordance with the CARES Act. In October 2020, we applied for forgiveness of the entire loan. As of March 5, 2021, we have not learned the extent to which our loan will be forgiven. Any unforgiven portion of the loan is payable over five years at an interest rate of 1%, with a deferral of payments until the date the lender receives the applicable forgiven amount from the SBA. No assurance is provided that we will obtain forgiveness of the loan in whole or in part.
We have a $30.0 million credit facility with Wells Fargo Bank, National Association which matures in July 2021, subject to a one-time, one-year extension at our election. In addition, at any time through July 27, 2021, we may increase the borrowing limit by up to an additional $10.0 million, subject to us having sufficient amounts of eligible accounts receivable and inventory and to customary conditions precedent, including obtaining the commitment of lenders to provide such additional amount.
At December 31, 2020, we had no outstanding borrowings under the credit facility. The borrowing capacity under the credit facility is determined monthly and is based on the amount of our eligible accounts receivable and inventory balances and qualified cash (as defined in the credit facility). Depending on the extent to which our eligible accounts receivable and inventory balances increase, our borrowing capacity could increase by as much as an additional $3.5 million from the $23.0 million available as of December 31, 2020 before we are required to maintain the minimum fixed charge coverage ratio as discussed below. The credit facility contains various customary affirmative and negative covenants, including prohibiting us from incurring indebtedness without the lender’s consent. In April 2020, we received the lender's consent to obtain the PPP loan. Under the terms of the credit facility, if our Total Liquidity (as defined in the credit facility) is less than $5.0 million, we are required to maintain a minimum fixed charge coverage ratio of 1.10 to 1.00 for the applicable measurement period. Our Total Liquidity was $98.0 million at December 31, 2020, and therefore that financial covenant was not applicable at that time.
In August 2016, we entered into an asset purchase agreement with NLT to acquire certain of the assets of NLT’s medical device business related to the expandable interbody medical devices. We made an up-front cash payment of $1.0 million in connection with the initial closing in September 2016 and issued 350,000 shares of our common stock in January 2017 as contingent closing consideration. As of December 31, 2020, included in contingent consideration liabilities was a $0.1 million liability representing the estimated fair value of future contingent royalty payments based on percentages of our future net sales of certain of the products and technology we acquired, which we anticipate will become payable at varying times through 2030. The contingent milestone payments, if any, are payable in cash or in shares of our common stock, at our election. In each of the months July 2020 and August 2020, we elected to pay $1.0 million of our milestone payments in shares of our common stock. The contingent royalty payments are payable in cash.
In January 2020, we entered into an Underwriting Agreement with Piper Sandler & Co. and Canaccord Genuity LLC relating to the issuance and sale of 6,800,000 shares of our common stock at a public offering price of $12.50 per share, before underwriting discounts and commissions. We granted the underwriters an option, exercisable for 30 days, to purchase up to an additional 1,020,000 shares of common stock. The underwriters exercised this option and the offering closed on January 10,
2020 with the sale of 7,820,000 shares of our common stock, resulting in proceeds of approximately $91.6 million, after deducting underwriting discounts and commissions and estimated offering expenses payable by us.
Cash and Cash Equivalents
We had cash and cash equivalents totaling approximately $76.8 million and $20.2 million at December 31, 2020 and December 31, 2019, respectively.
| ||Year Ended December 31,|
| ||(In thousands)|
|Net cash used in operating activities||$||(24,599)||$||(20,277)|
|Net cash (used in) provided by investing activities||(17,042)||17,166 |
|Net cash provided (used in) by financing activities||98,138 ||(829)|
|Effect of exchange rate changes on cash and cash equivalents||117 ||(94)|
|Net change in cash and cash equivalents||$||56,614 ||$||(4,034)|
Net Cash Flows Used in Operating Activities
Net cash used in operating activities was $24.6 million and $20.3 million during 2020 and 2019, respectively.
Operating cash outflows during 2020 increased by $4.3 million compared to 2019. The increase was due to a $2.4 million higher change in working capital, with a $12.6 million increase in working capital in 2020 compared to $10.2 million in 2019. The higher working capital change was primarily related to an increase in inventory, partially offset by a decrease in accounts receivable. Additionally, net loss adjusted for non-cash items was higher by $1.9 million, increasing to $12.0 million in 2020, compared to $10.1 million in 2019.
Net Cash Flows (Used in) Provided by Investing Activities
Net cash used by investing activities was $17.0 million in 2020 compared to net cash provided by investment activities of $17.2 million in 2019. The $34.2 million decrease was primarily due to $25.0 million of purchases of short-term investments, $5.0 million less maturities of short-term investments, $3.2 million more purchases of property and equipment, and $1.0 million of additions to technology assets.
Net Cash Flows Provided by (Used in) Financing Activities
Net cash provided by financing activities was $98.1 million in 2020 compared to net cash used in financing activities of $0.8 million in 2019. Cash flows provided by financings in 2020 were comprised primarily of $91.6 million from issuance of common stock, net of offering costs, $6.2 million of net proceeds from the PPP loan, and $2.6 million of proceeds from the issuance of common stock under our employee stock purchase plan and from the exercise of stock options, partially offset by tax payments of $2.2 million we made on our employees' behalf for shares we withheld from such employees on the vesting of restricted stock awards to cover statutory tax withholding requirements and $0.1 million of contingent consideration payments to NLT.
Off-Balance Sheet Arrangements
There were no off-balance sheet arrangements as of December 31, 2020 that have, or are reasonably likely to have, a current or future effect on our financial condition, changes in financial condition, revenues or expenses, results of operations, liquidity, capital expenditures or capital resources that is material to our business.
Contractual Obligations and Commitments
As of December 31, 2020, we were obligated to pay the following amounts under various agreements:
|Total||Less than 1 Year||1-3 Years||4-5 Years||More than 5 Years|
|Operating Leases||11.1 ||2.6 ||3.8 ||2.8 ||1.9 |
|Purchase Obligations||20.4 ||20.4 ||— ||— ||— |
|Other||0.2 ||0.2 ||— ||— ||— |
|Total||$||31.7 ||$||23.2 ||$||3.8 ||$||2.8 ||$||1.9 |
The "Other" line item includes minimum milestone payments under certain license agreements. The table above excludes the following liabilities because we cannot reliably estimate the timing of when they may become payable, if ever:
•royalty payments related to the NLT asset acquisition; and
•up to $2.0 million in the aggregate of potential royalty and milestone payments under a license agreement that may be payable at various stages of developing the licensed technology and sales of products using the licensed technology.
Critical Accounting Policies and the Use of Estimates
Our discussion and analysis of financial condition and results of operations is based upon our consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States of America. Preparing these financial statements requires us to make estimates and assumptions that affect the reported amounts of assets and liabilities, the disclosure of contingent liabilities, and the reported amounts of revenues and expenses. Significant estimates affecting amounts reported or disclosed in the consolidated financial statements include revenue recognition, allowances for doubtful accounts receivable and sales return and other credits, net realizable value of inventories, amortization periods for acquired intangible assets, estimates of projected cash flows and discount rates used to value intangible assets and test them for impairment, estimates of projected cash flows and assumptions related to the timing and probability of the product launch dates, discount rates matched to the timing of payments, and probability of success rates used to value contingent consideration liabilities from business combinations, estimates of projected cash flows and depreciation and amortization periods for long-lived assets, valuation of stock-based compensation, computation of taxes and valuation allowances recorded against deferred tax assets, and loss contingencies. These estimates are based on historical experience and on various other assumptions believed to be reasonable under the current circumstances. Actual results could differ from these estimates.
The full extent to which the COVID-19 pandemic will directly or indirectly impact our business, results of operations and financial condition, including sales, expenses, manufacturing, research and development costs and employee-related compensation, will depend on future developments that are highly uncertain, including as a result of new information that may emerge concerning COVID-19 and the actions taken to contain it or treat COVID-19, as well as the economic impact on local, regional, national and international customers and markets. We have made estimates of the impact of COVID-19 within our financial statements and there may be changes to those estimates in future periods. Actual results may differ from these estimates.
We believe that the following accounting policies, which form the basis for developing these estimates, are those that are most critical to the presentation of our consolidated financial statements and require the more difficult subjective and complex judgments:
Our net sales are derived primarily from the sale of orthobiologics and spinal implant products globally. Revenue is recognized when obligations under the terms of a contract with our customer are satisfied which occurs with the transfer of control of our products. This occurs either upon shipment or delivery of goods, depending on whether the contract is Free on Board (FOB) origin or FOB destination, or, in other situations such as consignment arrangements, when the products are used in a surgical
procedure (implanted in a patient). Revenue is measured as the amount of consideration we expect to receive in exchange for transferring products to a customer (transaction price).
To the extent that the transaction price includes variable consideration, such as discounts, list price discounts, rebates, volume discounts and customer payment penalties, we estimate the amount of variable consideration that should be included in the transaction price utilizing the most likely amount method. Variable consideration is included in the transaction price if, in our judgment, it is probable that a significant future reversal of cumulative revenue under the contract will not occur. Estimates of variable consideration and determination of whether to include estimated amounts in the transaction price are based largely on an assessment of our anticipated performance and all information (historical, current and forecasted) that is reasonably available.
We reduce revenue by estimates of potential future product returns and other allowances. Provisions for product returns and other allowances are recorded as a reduction to revenue in the period sales are recognized. We estimate the amount of sales returns and allowances that will eventually be incurred. Certain contracts with stocking distributors contain provisions requiring us to repurchase inventory upon termination of the contract or discontinuation of a product line. Included in the sales returns reserve within other current liabilities is an estimate of repurchases that are likely to be made under these provisions. Management analyzes sales programs that are in effect, contractual arrangements, market acceptance and historical trends when evaluating the adequacy of sales returns and allowance accounts.
In certain sales arrangements, we fulfill our obligations and bill the customer for the products prior to the shipment of goods. We allocate the transaction price to the multiple performance obligations under these contracts, including delivery of the products and the third-party logistics (3PL) performance obligations. Revenue related to product sales under these arrangements is not recognized until we deliver the products to the customer’s dedicated space within our facility, at which point the customer obtains control of the products. Revenue from the related 3PL obligations consists of revenue from storage of products which is recognized ratably over the service period, and revenue from shipping services which is recognized upon performance of such obligation.
Product royalties account for less than 1% of total revenue for any of the periods presented, and are estimated and recognized in the same period that the royalty-based products are sold by licensees. We estimate and recognize royalty revenue based upon communication with licensees, historical information and expected sales trends. Differences between actual revenues and estimated royalty revenues are adjusted in the period in which they become known, which is typically the following quarter. Historically, such adjustments have not been material.
Allowance for Doubtful Accounts Receivable
We evaluate the collectability of accounts receivable based on a combination of factors. In circumstances where a specific customer is unable to meet its financial obligations to us, we record an allowance to reduce the net recognized receivable to the amount we reasonably expect to collect. For all other customers, we record allowances for doubtful accounts based on the length of time the receivables are past due, the current business environment and our historical experience. If the financial condition of customers or the length of time that receivables are past due were to change, we may incur bad debt expense in general and administrative expense.
Inventories, consisting of purchased materials, direct labor and manufacturing overhead, are stated at the lower of cost, the value determined by the first-in, first-out method, or the net realizable value methods. At each balance sheet date, we evaluate ending inventories for excess quantities, obsolescence or shelf-life expiration. Our evaluation includes an analysis of our current and future strategic plans, historical sales levels by product, projections of future demand by product, the risk of technological or competitive obsolescence for our products, general market conditions, a review of the shelf-life expiration dates for our products, and the feasibility of reworking or using excess or obsolete products or components in the production or assembly of other products that are not obsolete or for which we do not have excess quantities in inventory. To the extent that we determine there are excess or obsolete quantities or quantities with a shelf life that is too near its expiration for us to reasonably expect that we can sell those products prior to their expiration, we adjust their carrying value to estimated net realizable value. If future demand or market conditions are lower than our projections or if we are unable to rework excess or obsolete quantities into other products, we may record further adjustments to the carrying value of inventory through a charge to cost of goods sold in the period the revision is made. In addition, we capitalize inventory costs associated with certain products prior to regulatory approval, based on management’s judgment of probable economic benefit. We could be required to expense previously
capitalized costs related to pre-approval inventory upon a change in such judgment, due to, among other potential factors, a denial or delay of approval by necessary regulatory bodies or a decision by management to discontinue the related development program.
We determine if an arrangement is a lease at inception. Our leases primarily relate to administrative, manufacturing, research, and distribution facilities and various manufacturing, office and transportation equipment. Lease assets represent our right to use an underlying asset for the lease term and lease liabilities represent the obligation to make lease payments arising from the lease. Lease assets and liabilities are recognized at commencement date based on the present value of lease payments over the lease term. As the our leases do not provide an implicit rate, our incremental borrowing rate is used as a discount rate, based on the information available at the commencement date, in determining the present value of lease payments. Lease assets also include the impact of any prepayments made and are reduced by impact of any lease incentives.
We made an accounting policy election for short-term leases, such that we will not recognize a lease liability or lease asset on its balance sheet for leases with a lease term of twelve months or less as of the commencement date. Rather, any short-term lease payments will be recognized as an expense on a straight-line basis over the lease term. The current period short-term lease expense reasonably reflects the Company's short-term lease commitments.
We made a policy election for all classifications of leases to combine lease and non-lease components and to account for them as a single lease component. Variable lease payments are excluded from the lease liability and recognized in the period in which the obligation is incurred. Additionally, lease terms may include options to extend or terminate the lease when it is reasonably certain we will exercise the option.
Valuation of Identifiable Intangible Assets
Our intangible assets are comprised primarily of product technology, customer relationships, and trade name and trademarks. We make significant judgments in relation to the valuation of intangible assets resulting from business combinations and asset acquisitions. Significant estimates include, but are not limited to, measurements estimating cash flows and determining the appropriate discount rate.
Intangible assets are amortized on a straight-line basis over their estimated useful lives of 1 to 20 years. We base the useful lives and related amortization expense on the period of time we estimate the assets will generate revenues or otherwise be used by the Company. We also periodically review the lives assigned to our intangible assets to ensure that our initial estimates do not exceed any revised estimated periods from which we expect to realize cash flows from the technologies. If a change were to occur in any of the above-mentioned factors or estimates, the likelihood of a material change in our reported results would increase.
We review identifiable intangible assets with definite lives for impairment quarterly or whenever events or changes in circumstances indicate that the carrying value may not be recoverable. Factors we consider in determining whether a triggering event has occurred include a significant change in the business climate, legal factors, operating performance indicators, competition, sale or disposition of significant assets or products. Application of these impairment tests requires significant judgments, including estimation of future cash flows, which depends on internal forecasts, estimation of the long-term rate of growth for our business, the useful life over which cash flows will occur and determination of our weighted-average cost of capital.
Should a triggering event be deemed to occur, we are required to estimate the expected net cash flows to be realized over the life of the asset and/or the asset’s fair value. Fair values are determined by a discounted cash flow model. These estimates are also subject to significant management judgment including the determination of many factors such as revenue growth rates, cost growth rates, terminal value assumptions and discount rates. Changes in these estimates can have a significant impact on the determination of cash flows and fair value and could result in future material impairments.
Due to market trend factors, new features necessary to be competitive, and changing pricing dynamics, there were shifts in the commercialization strategy of some of the acquired product technologies and the estimated future net sales associated with those technologies. During the years ended December 31, 2020 and 2019, we performed a recoverability test and determined that the expected net cash flows to be realized over the life of the technology related intangible assets were no longer recoverable and were impaired. See Note 4, "Balance Sheet", to the Notes to Consolidated Financial Statements included in Part
IV of this report for additional information regarding these impairments. If our estimates of expected cash flows continue to decline, we may record additional impairment charges on the related intangible assets in the future.
Valuation of Stock-Based Compensation
The estimated fair value of stock-based awards exchanged for employee and non-employee director services are expensed over the requisite service period.
For purposes of calculating stock-based compensation, we estimate the fair value of stock options using a Black-Scholes option-pricing model. The determination of the fair value of stock-based payment awards utilizing the Black-Scholes model is affected by our stock price and several assumptions, including expected volatility, expected term, risk-free interest rate and expected dividends. Due to our limited historical data as a separate public company, the expected volatility is calculated based upon the historical volatility of comparable companies in the medical device industry whose share prices are publicly available for a sufficient period of time. The expected term is calculated using the historical weighted average term of the Company’s options. The risk-free interest rates are derived from the U.S. Treasury yield curve in effect on the date of grant for instruments with a remaining term similar to the expected term of the options. We considered that we have never paid cash dividends and do not currently intend to pay cash dividends. The fair value of restricted stock awards granted is based on the market price of our common stock on the date of grant. In addition, we apply an expected forfeiture rate when amortizing stock-based compensation expense. The expected forfeiture rate is based on historical experience of pre-vesting forfeitures on awards by each homogenous group of shareowners and is estimated to be 13% and 14% annually for all non-executive employees for the years ended December 31, 2020 and 2019, respectively. We do not apply a forfeiture rate to awards (including stock options) granted to non-employee directors or executive employees because their pre-vesting forfeitures are anticipated to be highly unlikely. As individual awards become fully vested, stock-based compensation expense is adjusted to recognize actual forfeitures.
If factors change and we employ different assumptions, stock-based compensation expense may differ significantly from what we have recorded in the past. If there is a difference between the assumptions used in determining stock-based compensation expense and the actual factors which become known over time, specifically with respect to anticipated forfeitures, we may change the input factors used in determining stock-based compensation costs for future grants. These changes, if any, may materially impact our results of operations in the period such changes are made.
Our deferred income taxes reflect the net tax effects of temporary differences between the carrying amounts of assets and liabilities for financial reporting purposes and their basis for income tax purposes, and also the temporary differences created by the tax effects of capital loss, net operating loss and tax credit carryforwards. We record valuation allowances to reduce deferred tax assets to the amounts that are more likely than not to be realized. We could recognize no benefit from our deferred tax assets or we could recognize some or all of the future benefit depending on the amount and timing of taxable income we generate in the future.
Changes in the tax rates of the various jurisdictions in which we operate affect our profits. In addition, we maintain a reserve for uncertain tax benefits, changes to which could impact our effective tax rate in the period such changes are made. The effective tax rate can also be impacted by changes in tax law and in valuation allowances of deferred tax assets.
Our provision for income taxes may change period-to-period based on specific events, such as the settlement of income tax audits and changes in tax laws, as well as general factors, including the geographic mix of income before taxes, state and local taxes.
We recognize a tax benefit from an uncertain tax position only if it is more likely than not to be sustained upon examination based on the technical merits of the position. The amount of the accrual for which an exposure exists is not material for any period presented.
We believe that we have identified all reasonably identifiable exposures and the reserve we have established for identifiable exposures is appropriate under the circumstances; however, it is possible that additional exposures exist and that exposures will be settled at amounts different than the amounts reserved. It is also possible that changes in facts and circumstances could cause us to either materially increase or reduce the carrying amount of our tax reserves.
The Company is subject to various legal proceedings in the ordinary course of its business with respect to its products, its current or former employees, and its commercial relationships. The Company accrues for loss contingencies when it is deemed probable that a loss has been incurred and that loss is estimable. The amounts accrued are based on the full amount of the estimated loss before considering insurance proceeds, and do not include an estimate for legal fees expected to be incurred in connection with the loss contingency. The Company accrues legal fees expected to be incurred in connection with loss contingencies as those fees are incurred by outside counsel as a period cost. The Company's financial statements do not reflect any material amounts related to possible unfavorable outcomes of claims and lawsuits to which it is currently a party because it currently believes that such claims and lawsuits are not expected, individually or in the aggregate, to result in a material and adverse effect on its financial condition.
ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
As a "smaller reporting company" as defined by Item 10 of Regulation S-K, the Company is not required to provide this information.
|ITEM 8.||FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA|
Financial statements and the financial statement schedules specified by this Item, together with the report thereon of RSM US LLP, are presented following the signature page to this report.
|ITEM 9.||CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURES|
ITEM 9A. CONTROLS AND PROCEDURES
Evaluation of Disclosure Controls and Procedures
Based on an evaluation under the supervision and with the participation of our management, our Chief Executive Officer and Chief Financial Officer have concluded that our disclosure controls and procedures as defined in Rules 13a-15(e) and 15d-15(e) under the Exchange Act were effective as of the end of the period covered by this report to ensure that information required to be disclosed by us in reports that we file or submit under the Exchange Act is (i) recorded, processed, summarized and reported within the time periods specified in the SEC rules and forms and (ii) accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure.
Management’s Annual Report on Internal Control Over Financial Reporting
The Company's management is responsible for establishing and maintaining adequate internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) of the Exchange Act). Internal control over financial reporting is a process designed under the supervision and with the participation of our management, including our principal executive officer and principal financial officer, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with accounting principles generally accepted in the United States of America. Management conducted an assessment of the effectiveness of the Company's internal control over financial reporting based on the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission in Internal Control—Integrated Framework (2013 Framework). Based on this assessment, our management concluded that, as of December 31, 2020, our internal control over financial reporting was effective based on those criteria. RSM US LLP, the Company’s independent registered public accounting firm, has issued an attestation on the Company’s internal control over financial reporting which is included herein.
Changes in Internal Control over Financial Reporting
There have been no changes in our internal control over financial reporting identified in connection with the evaluation required by Rules 13a-15(d) and 15d-15(d) under the Exchange Act that occurred during the fiscal quarter to which this report relates that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.
Report of Independent Registered Public Accounting Firm
To the Stockholders and the Board of Directors of SeaSpine Holdings Corporation
Opinion on the Internal Control Over Financial Reporting
We have audited SeaSpine Holdings Corporation's (the Company) internal control over financial reporting as of December 31, 2020, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission in 2013. In our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 31, 2020, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission in 2013.
We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the consolidated balance sheets of the Company as of December 31, 2020 and 2019, the related consolidated statements of operations, comprehensive loss, stockholders’ equity and cash flows for each of the two years in the period ended December 31, 2020 of the Company and our report dated, March 5, 2021, expressed an unqualified opinion.
Basis for Opinion
The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting in the accompanying Management’s Annual Report on Internal Control Over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.
We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audit also included performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.
Definition and Limitations of Internal Control Over Financial Reporting
A company's internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company's internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of the company's assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
/s/ RSM US LLP
Los Angeles, California
March 5, 2021
ITEM 9B. OTHER INFORMATION
On March 1, 2021, we entered into a supply agreement with PcoMed, pursuant to which PcoMed granted us a worldwide right to sell and commercialize any implantable spinal surgery interbody and/or intervertebral medical device designed and/or manufactured by or for us treated by PcoMed with certain proprietary PcoMed technology (Processed Parts) for use in spinal interbody and/or intervertebral surgical methods and procedures. The right is exclusive to us through January 14, 2022; thereafter, it will be non-exclusive. The supply agreement replaces and supersedes a prior supply agreement between us and PcoMed entered into in May 2013, which expired on January 15, 2021 (the "Expired Agreement").
Pursuant to the supply agreement, PcoMed, which serves as the sole supplier of Processed Parts, will supply up to designated minimum amounts of Processed Parts per week and per month per our request. In addition, if requested by us, PcoMed must use commercially reasonable efforts to supply Processed Parts in excess of those minimum amounts. We agreed to pay PcoMed (a) a low single digit royalty, consistent with the rate in the Expired Agreement, on a monthly basis on our net sales of all Processed Parts, (b) a minimum processing fee for each contract year during the term of the supply agreement, payable in four equal quarterly installments, which offsets on a dollar-for-dollar basis the processing fees we would otherwise pay for Processed Parts each contract year and (c) additional processing fees payable monthly based on the number and type of Processed Parts supplied by PcoMed.
The supply agreement contains customary representations, warranties, covenants and indemnification obligations on the part of both parties. Each of us and PcoMed retain the rights to our respective intellectual property. The supply agreement may be terminated by us or PcoMed for cause in the event of an uncured material default or breach or a bankruptcy or similar proceeding. Unless terminated earlier pursuant to its terms, the term of the supply agreement is March 1, 2021 through January 14, 2024. During the term of the supply agreement, PcoMed agreed not to enter into any agreement or consummate any transaction with any third party relating to a change in control of PcoMed without first affording us, in accordance with the terms of the supply agreement, the opportunity to negotiate for the acquisition of PcoMed.
Item 10. DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE.
Information required by this item will be set forth under the headings “PROPOSAL 1: ELECTION OF DIRECTORS,” “EXECUTIVE COMPENSATION AND OTHER INFORMATION,” and, if applicable, “DELINQUENT SECTION 16(a) REPORTS” in our definitive proxy statement to be filed with the SEC in connection with our 2021 Annual Meeting of Stockholders, or the Definitive Proxy Statement, which is expected to be filed not later than 120 days after the end of our fiscal year ended December 31, 2020, and is incorporated in this report by reference.
Item 11. EXECUTIVE COMPENSATION.
The information required by this item will be set forth under the heading "EXECUTIVE COMPENSATION AND OTHER INFORMATION" in the Definitive Proxy Statement and is incorporated in this report by reference.
Item 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS.
The information required by this item will be set forth under the headings “SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT” and “EXECUTIVE COMPENSATION AND OTHER INFORMATION” in the Definitive Proxy Statement and is incorporated in this report by reference.
Item 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE.
The information required by this item will be set forth under the headings “CERTAIN RELATIONSHIPS AND RELATED PARTY TRANSACTIONS” and “PROPOSAL 1: ELECTION OF DIRECTORS” in the Definitive Proxy Statement and is incorporated in this report by reference.
Item 14. PRINCIPAL ACCOUNTANT FEES AND SERVICES.
The information required by this item will be set forth under the headings “PROPOSAL 2: RATIFICATION OF SELECTION OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM” in the Definitive Proxy Statement and is incorporated in this report by reference.
|ITEM 15.||EXHIBITS AND FINANCIAL STATEMENT SCHEDULES|
(a) Documents filed as a part of this report.
1. Financial Statements.
The following financial statements and financial statement schedules are filed as a part of this report:
All other schedules not listed above have been omitted, because they are not applicable or are not required, or because the required information is included in the consolidated financial statements or notes thereto.
3. Exhibits required to be filed by Item 601 of Regulation S-K.
|Incorporated by Reference|
|Exhibit No.||Description||Filed or Furnished Herewith||Form||File/Film No.||Date Filed|
|10.12(a)|Credit Agreement between SeaSpine Holdings Corporation, SeaSpine Orthopedics Corporation, SeaSpine, Inc., SeaSpine Sales LLC, Theken Spine, LLC, ISOTIS Orthobiologics, Inc. and Wells Fargo Bank, National Association, as administrative agent for each member of the lender group and the bank product providers, entered into as of December 24, 2015 |Form 10-K||001-36905-161510399||3/16/2016|
|10.12(b)|First Amendment to Credit Agreement and Waiver among SeaSpine Holdings Corporation, SeaSpine Orthopedics Corporation, SeaSpine, Inc., SeaSpine Sales LLC, Theken Spine, LLC, ISOTIS Orthobiologics, Inc. and Wells Fargo Bank, National Association, as administrative agent for each member of the lender group and the bank product providers, made as of October 14, 2016 |Form 10-K||001-36905-17665133||3/3/2017|
|10.12(c)|Amended and Restated Credit Agreement between SeaSpine Holdings Corporation, SeaSpine Orthopedics Corporation, SeaSpine, Inc., SeaSpine Sales LLC, Theken Spine, LLC, ISOTIS Orthobiologics, Inc. and Wells Fargo Bank, National Association, as administrative agent for each member of the lender group and the bank product providers, entered into as of July 27, 2018 |Form 10-Q||001-36905-181164006||11/6/2018|
Second Amendment to Amended and Restated Credit Agreement made as of July 30, 2020 by and among Wells Fargo Bank, N.A., as administrative agent for each member of the lender group and the bank product providers, the lenders party thereto, SeaSpine Holdings Corporation, SeaSpine Orthopedics Corporation, SeaSpine, Inc., ISOTIS, Inc., SeaSpine Sales LLC, Theken Spine, LLC, and IsoTis Orthobiologics, Inc. |Form 10-Q||001-36905-201298825||11/9/2020|
|10.17**||Form 10-Q||001-36905-17818719 ||5/5/2017|
|24.1||Power of Attorney (included on the signatures page)||X|
|†101.INS|| ||Inline XBRL Instance Document - the instance document does not appear in the Interactive Data File because its XBRL tags are embedded within the Inline XBRL document.||X|
|†101.SCH|| ||Inline XBRL Taxonomy Extension Schema Document||X|
|†101.CAL|| ||Inline XBRL Taxonomy Extension Calculation Linkbase Document||X|
|†101.DEF|| ||Inline XBRL Definition Linkbase Document||X|
|†101.LAB|| ||Inline XBRL Taxonomy Extension Labels Linkbase Document||X|
|†101.PRE|| ||Inline XBRL Taxonomy Extension Presentation Linkbase Document||X|
|104||Cover Page Interactive Data File (embedded within Exhibit 101.INS Inline XBRL document)||X|
* Confidential treatment has been requested or granted to certain confidential information contained in this exhibit. Such information was omitted from this exhibit by means of redacting a portion of the text and replacing it with an asterisk. We have filed separately with the SEC an unredacted copy of the exhibit.
# Certain schedules and attachments referenced in this agreement have been omitted in accordance with Item 601(b)(2) of Regulation S-K. A copy of any omitted schedule and attachment will be furnished supplementally to the SEC upon request.
** Indicates management contract or compensatory plan or arrangement.
*** These certifications are being furnished solely to accompany this report pursuant to 18 U.S.C. 1350, and are not being filed for purposes of Section 18 of the Securities Exchange Act of 1934 and are not to be incorporated by reference into any filing of the registrant, whether made before or after the date hereof, regardless of any general incorporation by reference language in such filing.
† The financial information of SeaSpine Holdings Corporation Annual Report on Form 10-K for the year ended December 31, 2020 filed on March 5, 2021 formatted in iXBRL (Inline Extensible Business Reporting Language): (i) the Consolidated Statements of Operations, (ii) the Consolidated Statements of Comprehensive Loss, (iii) the Consolidated Balance Sheets, (iv) Parenthetical Data to the Consolidated Balance Sheets, (v) the Consolidated Statements of Cash Flows, (vi) the Consolidated Statements of Equity, and (vii) Notes to Consolidated Financial Statements, is furnished electronically herewith.
|ITEM 16.||FORM 10-K SUMMARY|
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.
| ||SEASPINE HOLDINGS CORPORATION|
|Date:||March 5, 2021||/s/ Keith C. Valentine|
| ||Keith C. Valentine|
| ||President and Chief Executive Officer|
Power of Attorney
KNOW ALL PERSONS BY THESE PRESENTS, that each person whose signature appears below constitutes and appoints Keith C. Valentine and John J. Bostjancic, jointly and severally, his or her attorneys-in-fact, each with the power of substitution, for him or her in any and all capacities, to sign any amendments to this Annual Report on Form 10-K, and to file the same, with exhibits thereto and other documents in connection therewith, with the Securities and Exchange Commission, hereby ratifying and confirming all that each of said attorneys-in-fact, or his substitute or substitutes, may do or cause to be done by virtue hereof.
Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant in the capacities and on the dates indicated:
|/s/ Keith C. Valentine|
President, Chief Executive Officer and Director
(Principal Executive Officer)
|March 5, 2021|
|Keith C. Valentine|
|/s/ John J. Bostjancic|